FLUKE 376 Digital AC/DC Clamp Multimeter

The FLUKE 376 Digital AC/DC Clamp Multimeter has True RMS voltage and current measurements, providing a DC current range of 999.9 A and an AC voltage range of 1000 V. With a Flexible Current Probe, the voltage range can reach up to 2500 A. The extended capabilities with the iFlex make FLUKE 376 one of the best choices for a Digital AC/DC Clamp Multimeter.

Product Info

AC Current via jaw	Range: 999.9 A Resolution: 0.1 A Accuracy: 2% ±5 digits (10-100 Hz), 2.5% ±5 digits (100-500 Hz)
AC Current via flexible current probe	Range: 2500 A Resolution: 0.1 A (≤999.9 A), 1 A (≤2500 A) Accuracy: 3% ±5 digits (5 – 500 Hz)
DC current	Range: 999.9 A Resolution: 0.1 A Accuracy: 2% ±5 digits
AC voltage	Range: 1000 V Resolution: 0.1 V (≤600.0 V), 1 V (≤1000 V) Accuracy: 1.5% ±5 digits (20 – 500 Hz)
DC voltage	Range: 1000 V Resolution: 0.1 V (≤600.0 V), 1 V (≤1000 V) Accuracy: 1% ±5 digits
Frequency via jaw	Range: 5.0 - 500.0 Hz Resolution: 0.1 Hz Accuracy: 0.5% ±5 digits
Resistance	Range: 60 kΩ Resolusion: 0.1 Ω (≤600 Ω), 1 Ω (≤6000 Ω), 10 Ω (≤60 kΩ)
Capacitance	Range: 1000 μF Resolution: 0.1 μF (≤100 μF), 1 μ F (≤1000 μF) Accuracy: 1% ±4 digits
Operating temperature	10°C to +50°C
Dimensions (L x W x H)	246 x 83 x 43 mm (9.68 x 3.26 x 1.69 in)
Weight	388 g

iFlex^® Flexible Current Probe expands the measurement range to 2500 A AC
CAT IV 600 V, CAT III 1000 V
True RMS AC voltage and current for accurate measurements on non-linear signals
Min, max, average and Inrush recording to capture variations automatically
Integrated low pass filter and state-of-the-art signal processing allows for use in noisy electrical environments while providing stable readings
Proprietary Inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it
Ergonomic design fits in your hand and can be used while wearing protective equipment
Large, easy to read backlight display automatically sets the correct measurement range so you do not need to change the switch positions while taking a measurement

EMC
- EN 61326-1:2006
Safety Compliance
- CAN/CSA-C22.2 No. 61010-1-04
- ANSI/UL 61010-1:2004
- ANSI/ISA-61010-1 (82.02.01):2004
- EN/IEC 61010-1:2001 to
- 1000V Measurement Category (CAT) III
- 600V Measurement Category (CAT) IV
- Pollution Degree 2
- EN/IEC 61010-2-032:2002
- EN/IEC 61010-031:2002+A1:2008