Fluke 45 Dual-Display Digital Multimeter Rentals

Fluke 45 Dual Display Multimeter

The Fluke 45 Dual Display Multimeter is equipped with multifunction vacuum fluorescent dual displays. The Fluke 45 model features true-RMD AC and DC voltage/current. This multimeter has a frequency range of 5 Hz to >1 MHz while offering a 0.05% +1 accuracy. The AC voltage ranges from 300 mV to 750 V and the DC voltage ranges from 300 mV to 1000 V or 100 mV to 1000 V. The selectable reference impedance for dB measurements makes Fluke 45 an excellent multimeter choice.

Keithley 2182A Multimeter

Make low noise measurements at high speeds, typically just 15nV p-p noise at 1s response time, 40–50nV p-p noise at 60ms
Delta mode coordinates measurements with a reversing current source at up to 24Hz with 30nV p-p noise (typical) for one reading; averages multiple readings for greater noise reduction
Synchronization to line provides 110dB NMRR and minimizes the effect of AC common-mode currents

Agilent 4349A 4-Channel High Resistance Meter

Short: 11 ms
Long: 31 ms
90 to 132 V or 198 to 264 V

Vitrek 4700 Precision High Voltage Meter

Calibrates Hipot Testers, HV Power Supplies and Insulation Testers
Basic Accuracy - 0.03% DC and 0.1% True RMS AC
Color Touch Screen - Makes for Easy Measurement Selection and Display

Keysight 34465A Digital Multimeter, 6 ½ Digit, Truevolt DMM

Visualize multiple measurements simultaneously
Easily log data, screen shots and system state
Rapidly prototype custom test sequences

Tektronix DMM4050 Digital Multimeter

Volts, ohms, and amps measurements
True RMS (AC, AC + DC) measurements
Diode and continuity testing

Agilent 34410A Digital Multimeter, 6½ Digit

6.5 digit resolution
10,000 readings at 5.5 digit resolution
0.003% DC, 0.06% AC basic accuracy

Chroma 12061 Digital MultiMeter

6½ digits resolution.
11 types of measurement characteristics
DC voltage/current (1000V/3A max)

Keithley 2016 Total Harmonic Distortion Multimeter

THD, THD+Noise, and SINAD measurements
20Hz–20kHz sine wave generator
Fast frequency sweeps

FLUKE 376 Digital AC/DC Clamp Multimeter

iFlex® Flexible Current Probe expands the measurement range to 2500 A AC
CAT IV 600 V, CAT III 1000 V
True RMS AC voltage and current for accurate measurements on non-linear signals

Fluke 87V True RMS Digital Multimeter

Unique function for accurate voltage and frequency measurements on variable speed motor drives (VSDs)
Atex 137 safety rating for use in zone 1 and zone 2
CAT IV 600 V safety approval for non-Ex industrial environments

Fluke 8588A Reference Multimeter

2.7 µV/V (95%), 3.5 µV/V (99%), 1 year relative accuracy, DC voltage without internal self-calibration or auto-adjustments
0.5 µV/V (95%), 0.65 µV/V (99%), 24 hour stability, DC voltage
7 µΩ/Ω (95%), 9 µΩ/Ω (99%), 1 year, resistance

Fluke 8558A 8.5-Digit Multimeter

Voltage sensitivity to hundreds of nV and current sensitivity to hundreds of pA allows you uncover ultra-low level transient signals
Up to 20 MHz bandwidth for voltage and 4 MHz for current retains high bandwidth content of the signal measured
18-bit SAR analog-to-digital converter that achieves 5 mega-samples per second

Fluke 8508A 8.5 Digit Reference Multimeter

8.5 Digit Resolution
Frequency: 47 Hz to 63 Hz
Consumption: 80 VA

Keithley 619 Electrometer/Multimeter

Dual-channel & IEEE-488 options
Full systems capability
Electrometer sensitivity

Keysight 4339B High Resistance Meter

Stable test fixtures: resistivity cell, component test fixture
Test sequence programming
Resistivity calculations

Keysight 3458A Multimeter

8.5 digit multimeter
Up to 100,000 readings /s
0.0004% basic DCV accuracy

Keysight 34461A Digital Multimeter

Color, graphical display with built-in bar chart, histogram, trend, math, and statistics
I/O: USB, LAN/LXI, GPIB (optional)
DMM Connectivity Utility software enables control, capture and views of your DMM's data on your PC or mobile device with a single click

Keysight 34420A NanoVolt, Micro-ohms Meter

7½ digits resolution
100 pV / 100 n ohms sensitivity
1.3 nVrms / 8 nVpp noise performance

Keysight 34411A Digital Multimeter, 6½ Digit

6½ digit resolution
50,000 readings/sec. @ 4 1/2 digits to the PC
1M reading memory

Keysight 34401A 6½ Digital Multimeter

6½ digit resolution
10 measurement functions: DC/AC voltage, DC/AC current, 2- and 4-wire resistance, diode, continuity, frequency, period
Basic accuracy: 0.0035% DC, 0.06% AC

Fluke 279FC/IFLEX True-RMS Thermal Multimeter

Check hot spots on high-voltage equipment and transformers, and detect heating of fuses, wires, insulators, connectors, splices, and switches
Full-featured multimeter with a built-in thermal imager
15 measurement functions including voltage ac and dc, resistance, continuity, capacitance, diode test, Min/Max/Avg, and current ac with included iFlex current probe

Keithley 2015-P Audio Analyzing Digital Multimeter

THD, THD+Noise, and SINAD measurements
20Hz–20kHz sine wave generator
Fast frequency sweeps

Keithley 2015 Total Harmonic Distortion Multimeter

THD, THD+Noise, and SINAD measurements
20Hz–20kHz sine wave generator
Fast frequency sweeps

Keithley 2002 Digital Multimeter

True 7.5 (or 8.5) digit resolution
Built-in Scanner (multiplexer) options
High accuracy ACV measurements

Keithley 2001 7½ -Digit High Performance Multimeter

True 7½ resolution
Exceptional measurement integrity with high speed
High speed function and range changing

Frequency range	5 Hz to >1 MHz
Frequency accuracy	0.05% +1, except 1000 Hz range, 0.05% +2
AC voltage	300 mV - 750 V
DC voltage	300 mV - 1000 V 100 mV - 1000 V
Power	90 to 264 V AC 50/60 Hz
Operating temperature	0°C to 50°C (32°F to 122°F)
AC current	10 mA - 10A
DC current	30 mA - 10 A