Keysight EPM-441A Single-Channel Power Meter
- Fully compatible with the HP 8480 series of power sensors and the ECP
- Designed for bench and automatic test equipment (ATE) use, the EPM-441A
- up to 200 readings per second with ECP series sensors
Rohde & Schwarz NRVS Power Meter
- Fast power, level and voltage measurements
- Intelligent NRV-Z probes and URV5-Z sensors: plug and play
- IEC/IEEE-bus interface
Keysight E4412A E-Series Wide Dynamic Range Power Sensor
- Fast measurement speed, up to 400 readings per second with the E4416A
- Wide dynamic range (-70 dBm to +20 dBm)
- Calibration factors, linearity ana temperature compensations data stored in EEPROM
Keysight Q8486A Thermocouple Waveguide Power Sensor
- Excellent SWR for reducing mismatch uncertainty
- 50 MHz calibration port
- Accurate calibration and traceability to US National Institute of Standards and Technology (NIST) millimeter-wave sensor calibration
Keysight N8480 Series Power Sensors
Keysight ECP-E26A CW Power Sensor
- Fast measurement speed, up to 400 readings per second with the.
- E4416A
- Wide dynamic range (-70dBm to +20dBm)
Gigatronics 80303A Standard Power Sensor
Bird 4027A2M Precision Power Sensor 1.5 MHz - 2.5 MHz
Keysight N1921A P-Series | Wideband | 50 MHz – 18 GHz
- Zero and calibrate while connected to the DUT
- -35 dBm to +20 dBm wide dynamic range for peak power measurements
- Calibration factors, linearity, temperature and bandwidth correction data stored in EEPROM
Keysight E9300 Power Sensor | 10 MHz to 18 GHz
- Frequency range of 10 MHz to 18 GHz
- Dynamic range of -60 to +20 dBm
- Operation with E4418A/B, E4419A/B, E4416A and E4417A power meters
Werlatone WPM11101 RF IN-Line Power Meter
- Local and/or remote monitoring
- Forward power reading/monitoring (watts or dbm)
- Reverse power reading/monitoring (watts or dbm)
Keysight 8990B RF Peak Power Analyzer | 50 MHz – 40 GHz
- 160 MHz video bandwidth
- 100 MSa/ sec continuous sampling with >1500 readings/ sec
- Frequency range of 50 MHz to 40 GHz (sensor dependent)
Keysight 8481A RF Power Sensor Type N
Keysight E4419B EPM Dual-Channel Power Meter
- Frequency Range: 9kHz to 110GHz, sensor dependent
- Power Range: -70dBm to +44dBm (100pW to 25W), sensor dependent
- Power Sensors: Compatible with all 8480 series and HP E series sensors
Bird 4022 Directional Power Sensor
- Cost-effective solution for maintaining critical RF systems
- Only 4 models are required to cover the frequency range of 1.8 MHz to 1 GHz and power range from 300 mW - 10 kW
- Full-Scale Accuracy ±3% for applications requiring accurate forward and reflected power measurement
Keysight N1914A EPM Series Dual-Channel Power Meter | 9 kHz - 110 GHz
- Frequency range of 9 kHz to 110 GHz (sensor dependent)
- Wide dynamic range of -70 to +44 dBm (sensor dependent)
- Speed improvement by 2X for E-Series sensors: up to 400 readings/sec
Giga-tronics 8502A RF Peak Power Meter
- Internal self-calibration
- Gas-Plasma display
- Graph display mode for plot of pulse profile
Keysight E4417A EPM-P Series Dual-Channel Power Meter
- 20 Msample/s per second sampling rate for reliable continuous and single shot measurements on wide bandwidth signals
- Time-gated and free run power measurements
- Free 'Analyzer Software' software for complete pulse and statistical analysis, software is located 'In the Library'
Rohde Schwarz FSH-Z18 Power Sensor
- True RMS value of measured signal irrespective of signal waveform
- Power measurements from 10 MHz to 18 GHz
- Measurement range –67 dBm to + 23 dBm
Keysight 8482A Power Sensor
Giga-tronics 8541 Universal Power Meter
- Power range of -70 dBm to +47 dBm (100 pW to 50 Watt)
- V Prop F input (BNC), analog output (BNC), blanking output (BNC), and trigger input (BNC)
- GPIB interface
Keysight N1924A Wideband Power Sensor, 50 MHz to 40 GHz
- Zero and calibrate while connected to the DUT
- -35 dBm to +20 dBm wide dynamic range for peak power measurements
- Calibration factors, linearity, temperature and bandwidth correction data stored in EEPROM
Giga-tronics 8652A 10 MHz - 40 GHz Dual Channel Power Meter
Keysight V3500A Handheld RF Power Meter
- Broad 10 MHz to 6 GHz frequency range enables use in a wide variety of applications
- Wide dynamic range of -60 dBm to +20 dBm
- Integrated power sensor eliminates the need to carry a separate power sensor
Keysight U2002A-H26 USB Power Sensor
- Frequency range of 50 MHz to 24 GHz
- Extended frequency of 10 MHz to 26.5 GHz with option H26.
- Wide dynamic range of -60 to +20 dBm