Yokogawa DL850EV ScopeCorder Oscilloscope | Vehicle Edition
- Powerful mobile data acquisition recorder and oscilloscope
- Measure & analyze dynamic behavior of electromechanical systems
- Flexible modular inputs for voltage, current, sensors, and CAN/LIN bus
Yokogawa DL750P ScopeCorder
- Max memory for high-speed sampler: 100 MW
- Time Axis Accuracy: ±(0.005%)
- 6 DSP Channels
Tektronix MSO5000B & DPO5000B Series Oscilloscopes
- Characterize signal parameters with a broad suite of standard measurement tools
- Advanced jitter and timing analysis characterizes signal integrity issues and their sources
- SignalVu software provides wideband spectral analysis and measurements, with options for audio, modulation, RF pulses, and settling time
Yokogawa SL1000 High Channel Count ScopeCorder
- Fast Acquisition Up to 100 MS/s on all channels (10 ns sampling interval) New 100 MS/s 12-Bit 1 kV¹ isolation module with 20 MHz bandwidth Supports parallel testing: Perform
- Up to 100 MS/s on all channels (10 ns sampling interval)
- New 100 MS/s 12-Bit 1 kV¹ isolation module with 20 MHz bandwidth
Yokogawa DL750 ScopeCorder 10 MS/s, 16 Channel, 8 Slots
- Integration of a High-Speed sampler (Oscilloscope) and Low-Speed sampler (Recorder) in a Single Unit
- Separate Memory Management for Each sampler
- High-Speed Sampling Triggered Only by Abnormal Events Occurring during Long-Term Observation (Low-Speed Sampling)
AstroNova TMX-18 Portable Data Recorder (Astro-Med)
- 17" LCD high-resolution touch screen display
- 18 channels of voltage & DC bridge inputs
- Dedicated 1 TB removable hard drive for data capture
Keysight CX3324A Device Current Waveform Analyzer
- "Anywhere" zoom function
- Dual channel current sensor
- Wide bandwidth
Wavecrest SIA 3000 Signal Integrity Analyzer
- Infiniband - Test to compliance on all channels simultaneously at speeds up to 4.5Gb/s per channel
- Rambus DRCG - Perform full DRCG validation in seconds
- Fibre Channel and Gigabit Ethernet - Test to compliance on all patterns and all channels simultaneously
LeCroy HDO6104A High Definition Oscilloscope
- 12-bit ADC resolution, up to 15 bits with enhanced resolution
- Up to 10 GS/s with Enhanced Sample Rate
- 350 MHz, 500 MHz, and 1 GHz bandwidths
Tektronix TDS5054B 4 Channel 500 MHz 5 GS/s Digital Oscilloscope
- 500 MHz Bandwidth Model
- 4 Channel Models
- 5 GS/s Sample Rate
Keysight MSO9404A Infiniium Oscilloscope, 4 GHz / 4 CH
- Engineered for the broadest measurement capability: 4 GHz bandwidth across all 4 analog channels 4 analog channels +16 digital channels 20 GSa/s max. sample rat Standard 20 Mpts
- 4 GHz bandwidth across all 4 analog channels
- 4 analog channels +16 digital channels
Tektronix TDP1000 High Voltage Differential Probe | 1 GHz
- 1 GHz probe bandwidth
- Selectable bandwidth-limiting filters
- Versatile DUT connectivity
Dewesoft Krypton 8XLV DAQ System
- Self-Developed Profile
- Data Butter
- Plug and Play
Dewesoft Krypton 8XACC Module
- IEPE accelerometer and microphone and voltage input
- Available in 1, 4, and 8 channels
- Isolated IEPE and voltage input
Tektronix 3 Series MDO Mixed Domain Oscilloscope
- 2 and 4 analog channel models
- 100 MHz, 200 MHz, 350 MHz, 500 MHz, 1 GHz bandwidth models
- Bandwidth is upgradable (up to 1 GHz)
Keysight PA2203A IntegraVision Power Analyzer | 4 Channels, 3-Phase AC
- Operates like an oscilloscope, but makes measurements like a power analyzer
- Achieve 0.05% basic accuracy for superior measurement integrity
- The PA2201A comes with 2 power channels for single phase measurements and analysis; the PA2203 has 4 power channels for 3-phase measurement and analysis
Dewesoft KRYPTONi-16xTH DAQ System
- Rugged deisgn
- Multi-channel / single channel option
- Fast sampling rate up to 100S/sec
Tektronix MDO4054-6 Mixed Domain Oscilloscope
- Mixed-domain analysis Time-correlated analog, digital, and RF signal acquisitions in a single instrument Wave Inspector controls provide easy navigation of time-correlated data from both the
- Time-correlated analog, digital, and RF signal acquisitions in a single instrument
- Wave Inspector controls provide easy navigation of time-correlated data from both the time and frequency domains
Tektronix MDO4054B-6 Mixed Domain Oscilloscope
- Mixed-domain analysis Time-correlated analog, digital, and RF signal acquisitions in a single instrument Wave Inspector controls provide easy navigation of time-correlated data from both the
- Time-correlated analog, digital, and RF signal acquisitions in a single instrument
- Wave Inspector controls provide easy navigation of time-correlated data from both the time and frequency domains
Keysight DSO9104H High-Definition Oscilloscope
- 1 GHz frequency range
- 100 Mpts memory
- 12 bits of resolution / 4096 quantization levels @ < 500 MHz
Keysight 34970A Data Acquisition & Switching Unit
- 34901A: 20-ch. Multiplexer
- 34902A: 16-ch. Multiplexer
- 34903A: 20-ch. Actuator/GP Switch
Keysight InfiniiVision DSO7104B Oscilloscope 1 GHz
- 100 MHz, 350 MHz, 500 MHz and 1 GHz models
- Up to 4 GSa/s sample rate
- 2+16 & 4+16 Channel mixed signal (MSO) models
Dewesoft SIRIUS-SBOXe (for the Dewesoft Krypton 8XLV DAQ System)
- Designed to be used with the Dewesoft Krypton 8XLV DAQ System
- SBOX with EtherCAT® interface
- Available in modular and rack solution
Tektronix MDO4014-3 Mixed Domain Oscilloscope
- Mixed-domain analysis Time-correlated analog, digital, and RF signal acquisitions in a single instrument Wave Inspector controls provide easy navigation of time-correlated data from both the
- Time-correlated analog, digital, and RF signal acquisitions in a single instrument
- Wave Inspector controls provide easy navigation of time-correlated data from both the time and frequency domains
LeCroy WaveRunner 64 Xi Oscilloscope 600 MHz, 4 Ch
- Sequence Acquisition Mode to optimize capture, viewing, and understanding of events that are spaced far apart in time.
- Extensive pass/fail capability with multiple conditions and limits, and flexibility to choose the action that is enabled when the conditions are satisfied.
- Creation of user-customized measurement parameters or math functions using Excel, MATLAB, Mathcad or VBScripts.