LeCroy WaveRunner 64 Xi Oscilloscope 600 MHz, 4 Ch
- Sequence Acquisition Mode to optimize capture, viewing, and understanding of events that are spaced far apart in time.
- Extensive pass/fail capability with multiple conditions and limits, and flexibility to choose the action that is enabled when the conditions are satisfied.
- Creation of user-customized measurement parameters or math functions using Excel, MATLAB, Mathcad or VBScripts.
Agilent 1134A InfiniiMax 7 GHz Active Probe
- Supports differential and single-ended measurements
- Common mode rejection of the differential probe reduces the noise floor
- Flat frequency response to eliminate distortion
LeCroy WM8300A Digital Oscilloscope 3 GHz, 20 GS/s
- High bandwidth from 3 GHz to 6 GHz
- Fast sampling speeds-to 20 GS/s on 4 channels
- Full sampling speed maintained over entire memory length
Tektronix TDP1000 High Voltage Differential Probe | 1 GHz
- 1 GHz probe bandwidth
- Selectable bandwidth-limiting filters
- Versatile DUT connectivity
Tektronix MSO4104 Mixed Signal Oscilloscope | 1 GHz, 4 CH
Tektronix DPO71604B Digital Phosphor Oscilloscope, 16 GHz, 4 Ch, 50 GS/s
- Pinpoint Triggering – Minimize time spent trying to acquire problem signals for efficient troubleshooting and shortened debug time
- Signal Integrity, Jitter, and Timing Analysis
- Memory Bus Analysis and Debug
Fluke 190-502 | 500 MHz 5 GS/s 2 channel
- Up to four independent floating isolated inputs, up to 1000 V Up to 5 GS/s real time sampling (Depending on model and channels used)
- Deep memory: 10,000 points per trace waveform capture (scope mode)
- CAT III 1000 V/CAT IV 600 V safety rated instrument for industrial environments
LeCroy WaveSurfer 104MXS-B Digital Oscilloscope 1 GHz
Keysight N9912A FieldFox 6 GHz Cable/Antenna Analyzer (Agilent FieldFox N9912A)
- Cable and antenna analyzer for return loss, one-port cable loss, distance to fault, line sweeping, and VSWR measurements
- Handheld network analyzer (S11, S21, phase, and Smith Chart)
- Handheld spectrum analyzer, optional preamplifier
Tektronix MDO4054B-6 Mixed Domain Oscilloscope
- Mixed-domain analysis Time-correlated analog, digital, and RF signal acquisitions in a single instrument Wave Inspector controls provide easy navigation of time-correlated data from both the
- Time-correlated analog, digital, and RF signal acquisitions in a single instrument
- Wave Inspector controls provide easy navigation of time-correlated data from both the time and frequency domains
Keysight N9000B CXA Signal Analyzer
- Frequency Options | 3, 7.5, 13.6, 26.5 GHz
- Max Analysis Bandwidth | 25 MHz
- DANL @1 GHz | -163 dBm
Rohde & Schwarz FSW Series Signal and Spectrum Analyzers
- Frequency range from 2 Hz to 8 /13.6 /26.5 /43.5 GHz
- Low phase noise of –137 dBc (1 Hz) at 10 kHz offset (1 GHz carrier)
- –88 dBc dynamic range (with noise cancellation) for WCDMA ACLR measurements
Rohde & Schwarz RTO2000 Oscilloscopes
- Bandwidth frequency range of 600 MHz to 4 GHz and expandable up to 6 GHz
- Vertical resolution: up to 16-bit with HD mode option
- MSO: 16 digital channels
Keysight MSO7104A 1 GHz, 4 GSa/s 16 Channel O-scope
- 1 GHz bandwidth
- 4 analog plus 16 digital channels
- 4 GSa/s sample rate
Tektronix RSA5106A Real-Time Spectrum Analyzer
- Frequency Range 1 Hz to 6.2 GHz.
- Trigger Modes: Free Run, Triggered, FastFrame.
- Level Range 0 dB to –100 dB from reference level.
Narda IDA 2 Interference and Direction Analyzer, Radio Direction Finder | 20 MHz - 6 GHz
- Extremely fast sweep at 12 GHz/s
- Real-time bandwidths up to 32 MHz for recording short duration signals
- Direction Finding mode with automatic azimuth determination
Rohde & Schwarz FSL Series | 9 kHz – 3/6/18GHz
- Frequency range 9 kHz to 3 GHz, 6 GHz or 18 GHz
- Models with and without tracking generator
- Signal analysis bandwidth of 28 MHz
Rohde & Schwarz FSH18 10 MHz - 18 GHz Spectrum Analyzer
- Frequency range of 10 MHz to 18 GHz
- Reference Level -80dBm to +20dBm
- TOI typ. 7 dBm
Keysight PA2203A IntegraVision Power Analyzer | 4 Channels, 3-Phase AC
- Operates like an oscilloscope, but makes measurements like a power analyzer
- Achieve 0.05% basic accuracy for superior measurement integrity
- The PA2201A comes with 2 power channels for single phase measurements and analysis; the PA2203 has 4 power channels for 3-phase measurement and analysis
Keysight DSA91304A Infiniium High Performance Oscilloscope 13 GHz
- 13 GHz bandwidth
- 40 GSa/s on each of 4 analog channels
- Standard 50 Mpts memory per channel, upgradeable to industry leading 1 Gpts
Fluke 199C
- Dual-input – 200, 100 or 60 MHz bandwidth
- Up to 2.5 GS/s real-time sampling per input
- Choice between a high-resolution color display (190C Series) or blackand-white display (190B Series)
Anritsu MS2038C VNA Master & Spectrum Analyzer | 5 kHz to 20 GHz
- 2-port, 2-path, fully-reversing VNA
- S-parameters measured with a single connection
- 350 μsec per data point
Keysight DSO9104H High-Definition Oscilloscope
- 1 GHz frequency range
- 100 Mpts memory
- 12 bits of resolution / 4096 quantization levels @ < 500 MHz
Keysight MXR608A Oscilloscope | 6 GHz, 8 ch
- Part of the Infiniium MXR-Series
- Bandwidth of 6 GHz
- 8 channels
Keysight N9320B RF Spectrum Analyzer | 9 kHz - 3 GHz
- Minimum non-zero span sweep time: < 10 ms
- Resolving power RBW: 10 Hz to 1 MHz
- Sensitivity DANL: -130 dBm, -148 dBm with preamp on