EM Test ESD 30N Electrostatic Discharge Simulator

Discontinued

Discontinued and Replaced by EM Test NX30

ESD 30N is an ESD tester to simulate ESD pulses at higher voltages up to 30kV in both air and contact discharge mode. It therefore satisfies requirements exceeding the EN/IEC 61000-4-2 test levels and complies to automotive test applications.

Product Info Related Products

Test Level
Test voltage	200V - 30,000V ± 5% for contact discharge 200V - 30,000V ± 5% for air discharge
Resolution	100V steps
Holding time (AD)	More than 5s
Mainframe
HV power supply	Up to 30kV DC
Power supply	88V - 250V AC 12V - 18V DC
Battery	Approx. 1 hour operation; Buffer battery is automatically recharged when connected to AC mains supply
Interface	USB to control the ESD generator and to download pre-programmed test routines from esd.control
Output
Contact Discharge Pulse	As per EN/IEC 61000-4-2; 150pF/330ohm
Rise time	As per EN/IEC 61000-4-2 Ed.2 0.8ns +/- 25%
First peak current value	As per EN/IEC 61000-4-2 Ed.2 7.5A ± 15% @2kV 15A ± 15% @4kV 15A ± 15% @4kV 15A ± 15% @4kV
Current value at 30ns	As per EN/IEC 61000-4-2 Ed.2 4.0A ± 30% @2kV 8.0A ± 30% @4kV 12.0A ± 30% @6kV 16.0A ± 30% @8kV
Current value at 60ns	As per EN/IEC 61000-4-2 Ed.2 2.0A ± 30% @2kV 4.0A ± 30% @4kV 6.0A ± 30% @6kV 8.0A ± 30% @8kV
Weight	Approx. 5.1kg (ESD 30N control unit)
Supply voltage	AC: 88V - 264V, 50/60Hz DC: 11V - 16VDC