Fluke 5500A Multi-Product Calibrator

Need Help? Call (800) 404-2832ATEC AssuranceWorldwide Delivery
Rent Fluke 5500A Multi-Product Calibrator
Enlarge Image
Fluke Calibration 5500A
Request Quote Print Page

The 5500A has been discontinued and replaced with the Fluke 5502A.

Visit the Fluke 5502A

The Fluke 5500A is a revolutionary product that addresses a wide cross-section of your electrical calibration work load. It sources direct voltage and current, alternating voltage and current with multiple waveforms and harmonics, two simultaneous voltage outputs or voltage and current, and simulates power with phase control, resistance, capacitance, thermocouples and RTDs. The 5500A's Oscilloscope Calibration options provide level sine wave, fast edge, time mark and amplitude signals for calibration of oscilloscopes up to 600 MHz.
Fluke Calibration 5500A Features
  • Handheld and bench multimeters
  • Oscilloscopes and ScopeMeter Test Tools
  • Wattmeters
  • Analog volt/ohm/amp/watt instruments
  • Electronic thermometers
  • Data loggers
  • Strip chart recorders
  • XY Recorders
  • Power harmonics analyzers
  • Process calibrators
  • Current clamps
  • And related instruments
Fluke Calibration 5500A Specs
Voltage DC: 0 to ±1020V
Current DC: 0 to ±11A
Resistance: 0 to 3.29.999 MΩ
Voltage AC: 1 mV to 1020V
10 Hz to 500 kHz, Sine
Current AC: 29 m A to 11A
10 Hz to 10 kHz, Sine
Capacitance: 0.33 nF to 1.1 mF
Thermocouple Source and Measure: -250°C to +2316°C (11 types)
RTD Source: -200°C to +630°C
(8 types)
DC Power: 109 mW to 11 kW
AC Power: 109 mW to 11 kW
45-65 Hz, PF=1
Phase: 0 to ± 179.99°
Frequency: 0.01 Hz to 2.0 MHz
Fluke 5220A - Transconductance Amplifier