Fluke CableIQ Copper and Fiber Technician’s Kit

Name: Fluke CableIQ Copper and Fiber Technician’s Kit Rental
Brand: Fluke Networks
SKU: FLUK-CIQ-FTKSFP-rent
Price: 469.00 USD
Availability: InStock

The Fluke CableIQ Copper and Fiber Technician’s Kit is a network cable tester package for copper and fiber that includes the CableIQ Qualification Tester and the SimpliFiberPro Fiber Test Kit. The Fluke CableIQ Copper and Fiber Technician’s Kit equips technicians with everything they need to isolate cabling problems from network problems, providing a four-second test that quickly determines if the existing cabling can support voice/10/100, VoIP or Gigabit Ethernet. Fluke CableIQ network testers troubleshoot cabling performance faults, ascertaining why exactly the existing cabling plant cannot support the desired network speed and reducing escalated problems by as much as 30%.

Product Info Related Products

General Specifications
Cable types supported	UTP, STP, FTP, SSTP, RG6, RG59, audio, security
Qualification autotests	1000BASE-T, 100BASE-TX, 10BASE-T, VoIP, 1394b S100, TELCO, Wiremap only, Coax
Supported tests	Wiremap, length, cable signal performance, digital toner, analog toner, Ethernet port detection and identification, analog telephone detection, blink port light, continuity, speaker test, cable fault finding, video signal detection
Find fault	Measures crosstalk and impedance and compares against appropriate limits based on qualification test selected. Detects location of large point sources as well as distributed sources in the cabling if they are sufficient to disqualify the application
Results storage	Up to 250 qualification test results
Power	Battery type: 4 AA (NEDA 15A, IEC LR6) alkaline batteries
Battery life	20 hours of typical use, without backlight
Other battery types supported	4AA photo lithium, NIMH, NICAD
Dimensions and weight	7 in x 3.5 in x 1.75 in (17.8 cm x 8.9 cm x 4.5 cm) 1.2 lb (0.55 kg)
M12/ RJ45 Cable Specifications
Cable type	Ethernet cable, Cat5e, shielded, 2 Pair AWG 26 stranded (7 wire), RAL 5021 (water blue), M12 4 pos. D- coded on RJ45 connector
Number of positions	4
Fixed cable length	2 m
Volume resistance	≤ 5 m Ω
Insulation resistance	≥ 100 M Ω
Ambient temperature	-20°C to 50°C
Inflammability class acc to UL 94	V0
Surge voltage category	II
Pollution degree	3
Degree of protection	IP20/IP67
External cable diameter	6.7 mm
Transmission characteristics	Cat 5 (IEC 11801:2002), Cat 5e (TIA 568B:2001)

Isolate cabling problems from network problems, save time and money by escalating fewer trouble tickets
Four-second test quickly determines if your existing cabling can support voice/10/100, VoIP or Gigabit Ethernet
Determine why the existing cabling plant cannot support the desired network speed (e.g. connection fault at 7 feet)
Free up 10% or more of your switch ports and discover what is at the far end of any cable, whether it is an open cable, a PC, an analog phone or switch
Detect speed/duplex mismatches in a matter of seconds; determine a PC’s duplex settings and compare settings to the connected switch all from one location
Isolate faults easier with intelligent wiremap, which allows you to test for wiremap, length, shorts, split pairs or opens, and graphically see the distance to specific pin faults, such as “pin 1 break at 37 feet”
Locate cables and wires with superior accuracy - breakthrough IntelliTone™ digital signaling technology precisely locates cables in even the most chaotic wiring closet
Empower frontline techs with an intuitive user interface and graphical display guides users with little or no training required
Avoid disputes over cause of network problems; save results or upload them to a PC with Cable IQ Reporter Software (included)