Fluke VR101S Voltage Event Recorder System 120 V

Fluke VR101S Voltage Event Recorder System
Enlarge Image
Fluke VR101S
Request Quote Print Page
Datasheet

The Fluke VR101S is the perfect system for catching sags, swells, transients, outages and frequency variations on 120V line voltage, where the most sensitive loads are connected.
 

The VR101S is a starter system that includes a compact VR101 event recorder, an optical interface cable, and EventView software that turns your PC into a power quality reporting tool.
 

Features:

  • Communicates with your PC via Optical RS232 interface
  • Uses Windows software (provided) to set thresholds
  • Then plug in any standard 120V outlet
  • Later download & view results using Windows software (provided)
  • Builds detailed reports of surges, sags, transients, outages and frequency variations

 

Specifications:

Electrical (120V Version)
Operating Range: 70V to 140V
Nominal Frequencies: 50 Hz or 60 Hz
Power Consumption: 2W
Sags, Swells and Outage Measurements
Hot-to-neutral Range: 0 to 200V rms
Accuracy: ±2V rms
Resolution: 1V rms
Neutral-to-ground Range: 3 to 200V rms
Accuracy: ±2V rms
Resolution: 1V rms
Transient Measurements *Minimum pulse width: 1s
Hot-to-neutral Range: 100 to 2500V peak
Accuracy: ±(10% reading +10V)
Resolution: 10V
Neutral-to-ground Range: 50 to 2500V peak
Accuracy: ±(10% reading +10V)
Resolution: 10V
Phase angle Range: 20° to 180°, 200° to 360°
Accuracy: ±1°
Resolution: 1°
Frequency Measurements
50/60Hz Nominal Range: 45 to 65 Hz
Accuracy: ±0.1 Hz (3 cycles min)
Resolution: 0.1 Hz
Time Measurements
Events < 1 second Hot-to-neutral Accuracy: ±0.5 cycles
Resolution: 0.5 cycles
Events < 1 second Neutral-to-ground Accuracy: ±1 cycle
Resolution: 1 cycle
Events >= 1 second (time stamp) Accuracy: ±(2 sec/day + 8 sec)
Resolution: 8 sec
General
Memory size 4000 events
Battery 3.5V lithium (non-replaceable 7 yr life)
Physical Size 3.35 in x 2.65 in x 1.35 in
Weight 4 oz (120g)
Computer Hardware Requirements IBM PC or 100% compatible, with Windows® 3.1, 95, 98, ME, NT, 2000 or XP installed and operating, at least one free RS-232 serial port, a pointing device (recommended), 2 MB hard drive space, 4 MB RAM (8 MB for Windows 95)