Rohde & Schwarz ZNB8 Vector Network Analyzer
- Wide dynamic range of up to 140 dB
- Short sweep times of 4 ms for 401 points
- High temperature stability of typ. 0.01 dB/°C
Keysight N5230C PNA-L Microwave Network Analyzer
- 300 kHz – 20 GHz
- Up to 122 dB (10 MHz – 6 GHz)
- 2 or 4 ports
Keysight 4294A Precision Impedance Analyzer
- Accurate measurement over wide impedance range and wide frequency range
- Basic impedance accuracy: +/- 0.08 %
- 40 Hz to 110 MHz, 3 m ohms 500M ohms
Keysight N5225B PNA Microwave Network Analyzer
- Frequency Range | 900 Hz-50 GHz
- Dynamic Range | 127 dB
- Harmonics | -60 dBc
Keysight 8722ES Vector Network Analyzer
- 50 MHz – 40 GHz
- Up to 110 dB
- 2 Ports
Keysight 4396B RF Network/Spectrum/Impedance Analyzer
- Full-vector network and spectrum measurement and analysis
- Wide dynamic range network measurement with fast sweep speeds
- +/-0.05 dB/ +/-0.3deg C dynamic magnitude/phase accuracy
Keysight E5071C ENA Vector Network Analyzer
- 9 kHz – 8.5 GHz
- Up to 123 dB
- 2 or 4 ports
Tektronix TTR506 Vector Network Analyzer
- Frequency range: 100 kHz – 6 GHz
- Dynamic range: Up to 122 dB
- 2 ports
Doble M5500 Sweep Frequency Response Analyzer
- 1045 points (Default)
- Up to 5000 points (Extended Range)
- Lightweight and rugged portable test instrument
Keysight N9951A FieldFox Handheld Microwave Analyzer
- Frequency Range: 300 kHz – 44 GHz
- Dynamic Range: Up to 110 dB
- 2 Ports
Keysight FieldFox N9923A Network Analyzer (Agilent N9923A)
- Built-in QuickCal technology enables calibration without a cal kit
- Best measurement stability over time and temperature
- Industry´s only handheld network analyzer with MIL PRF 28800F Class 2 compliance with no exceptions
Megger FRAX 101 Sweep Frequency Response Analyzer
- Smallest and most rugged FRA instrument in the industry
- Highest possible repeatability by using reliable cable practice and high-performance instrumentation
- Fulfills all international standards for SFRA measurements
Keysight 4193A Vector Impedance Meter, 400 kHz - 110 MHz
- Test components in-circuit and out-of-circuit
- Measure impedance magnitude (10 mΩ to 120 kΩ) and phase (-180.0 to +180.0)
- Fixtures include low-grounded probe, spring clip fixture, and binding post fixture
Anritsu MS2026A Vector Network Analyzer
- Frequency Range: 2 to 6000 MHz
- Frequency Accuracy: 25 ppm
- Frequency Resolution: 10 kHz
Keysight 85093C RF Electronic Calibration (ECal) Module | 3.5mm
- 300 kHz to 9 GHz frequency range
- Fast full two-port calibration with a single connection
- Simple non-insertable device calibration
Anritsu MS2034B VNA Master Vector Network Analyzer
- Frequency range of 9 kHz to 4 GHz
- Includes a powerful spectrum analyzer
- Ideal for making fast and reliable measurements in the field
Anritsu MS4647B VectorStar VNA | 10 MHz - 70 GHz
- 2-port vector network analyzer
- Frequency of 10 MHz to 70 GHz
- Easy-to-use applications
Megger FRAX150 Sweep Frequency Response Analyzer
- Highest dynamic range and accuracy in the industry
- Built-in PC with powerful backlit screen for use in direct sunlight
- Highest possible repeatability by using reliable cable practice and high-performance instrumentation
Anritsu MS46322B Vector Network Analyzer (VNA) | 1 MHz - 43.5 GHz
- Guaranteed performance to 43.5 GHz with Extended K™ ports
- Ideal for testing RF and microwave devices, mmWave antennas, and other passive 5G components
- Fast sweep speed and wide dynamic range minimize test times and maximize throughput
Keysight E5080B ENA Vector Network Analyzer
- ENA vector network analyzer
- Frequency range of 9 kHz to 53 GHz
- 2 or 4 ports
Keysight N5224B PNA Microwave Network Analyzer 10 MHz to 43.5 GHz
- PNA Network analyzer software tools for investigating, characterizing & troubleshooting designs
- Advanced Design System (ADS): complete, integrated set of fast and accurate circuit & system simulators
- Configurable test set
Keysight E4991B Impedance Analyzer
- Three frequency options: 1 MHz to 500 MHz/1 GHz/3 GHz, upgradable
- ±0.65% basic accuracy and 120 mΩ to 52 kΩ impedance range (10% measurement accuracy range)
- Built-in DC bias (Option 001): 0 V to ±40 V, 0 A to ±100 mA
Rohde & Schwarz ZVA8 Vector Network Analyzer
- Linear and nonlinear amplifier and mixer measurements
- Noise figure measurements
- Pulse profile measurements with 12.5 ns resolution
Anritsu MS2024B VNA Master Vector Network Analyzer
- Broadband coverage of 500 kHz to 4 GHz
- 1-path, 2-port vector network analyzer
- Intuitive graphical user-interface (GUI) with convenient touchscreen
Hioki IM7587-01 Impedance Analyzer
- Power: -40.0 dBm to +1.0 dBm
- Voltage: 4 mV to 502 mVrms
- Current: 0.09 mA to 10.04 mArms
