QuadTech 7600 Precision LCR Meter, 10 Hz - 2 MHz, 0.05% Accuracy

Rent, lease, rent to own QuadTech 7600 Precision LCR Meter, 10 Hz - 2 MHz, 0.05% Accuracy
Enlarge Image
Quadtech 7600
Request Quote Print Page
Datasheet

 

The Quadtech 7600 LCR Meter is designed to perform precision impedance measurements over a wide frequency range, 10 Hz to 500 kHz for the model 7400 and 10 Hz to 2 MHz for the 7600. The instrument is capable of measuring 14 different parameters with 0.05% accuracy to meet today’s requirements for component and material testing. The ease of use and user friendly menu programming makes the 7000 Series ideal for applications in product development, incoming inspections, or production line testing.

 

Specifications:

  • Measured Parameters: Any two of 14 parameters measured and displayed simultaneously, user selectable
Parameter Measurement Range
Cs, Cp 00000.01 fF to 9.999999 F
Ls, Lp 0000.001 nH to 99.99999 H
D .0000001 to 99.99999
Q .0000001 to 999999.9
|Z|, Rs, Rp, ESR, Xs 000.0001 m ohms to 99.99999 M ohms
|Y|, Gp, Bp 00000.01 µS to 9.999999 MS
Phase Angle -180.0000 to +179.9999 degrees
  • Test Frequency: 10 Hz to 2 MHz, continuous
    • Resolution: 0.1 Hz from 10 Hz to 10 kHz, 5 digits>10kHz
    • Accuracy: +/-(0.25% + 0.02 Hz)
  • Measurement Speed:
    • Basic: 25 measurements/second
    • Medium: 8 measurements/second
    • Slow: 1 measurements/second
  • Ranging: Automatic, Range Hold or user selectable.
  • Trigger: Internal (auto), External (RS-232, IEEE-488.2 or Handler interfaces) and Manual
  • AC Test Signal
    • Voltage:
      • 20 mV to 1.0 V (open circuit) 500 kHz - 1 MHz in 5 mV steps
      • 20 mV to 0.5 V (open circuit) >1 MHz in 5 mV steps Current
    • Current: 250 µA to 100 mA (short circuit) in 50 µA steps


Applications:

  • Testing of LCR Components
  • Frequency Response Characterization of Components
  • Component Screening
  • Material Testing
  • Quality Assurance Testing
  • Measuring Dielectric Constant Using Standard Test Cell

 

Features:

  • 7 Digit Measurement Resolution
  • Auto Ranging
  • Test Setup and Measurement Data Storage
  • Four-Terminal Kelvin Connections
  • IEEE-488, RS-232, Handler, and Parallel Printer Interfaces
  • Graphical and Tabular Display of Swept Frequency, Voltage and Current Measurements
  • Sequence Testing of up 6 Individual Tests
  • Load Correction
  • Built-in Automatic Calibration Routine


There are various options and available for the QuadTech 7600, including the 7000-07 Chip Component Test Fixture.