Fluke 1550C Insulation Resistance Tester 5 kV
- Test voltages up to 5 kV provides solutions for all applications
- CAT III 1000 V, CAT IV 600 V safety rating
- Voltage breakdown detection alerts the user that voltage is present and gives the voltage reading up to 600 V ac or dc for increased user safety
Megger S1-1068 Insulation Resistance Tester
- Resistance measurement: 15 TΩ - 5 kV, 35 TΩ - 10 kV, 35 TΩ - 15 kV
- High current – 6 mA short circuit current
- High noise immunity – 8 mA of noise rejection
Megger S1-1568 Insulation Resistance Tester
- Resistance measurement: 15 TΩ - 5 kV, 35 TΩ - 10 kV, 35 TΩ - 15 kV
- High current – 6 mA short circuit current
- High noise immunity – 8 mA of noise rejection
Megger MIT1025 Diagnostic Insulation Resistance Tester
- Measures up to 20 TΩ
- PI, DAR, DD, SV and ramp test
- Improved productivity – operate from line power/mains if battery dead
Fluke 1625-2 GEO Earth Ground Tester
- 3- and 4-pole earth ground measurement
- 4-Pole soil resistivity testing
- 2-pole resistance measurement AC
High Voltage Ohm-Check Neutral Resistance Tester
- Cable to clamp-on meter, 10’
- Cables between reels & neutral, 10’
- Line cord 10’ & #2 Ground Cable, 20’
Megger MGFL100 Battery Ground Fault Locator
- Alarms when the real fault is identified
- Direct measurement of resistance and stray capacitance
- Direct measurement of fault current and leakage current
AEMC 6555 Digital Megohmmeter
- Wide measurement range from 10kΩ to 30TΩ
- Fixed or programmable test voltage from 40V to 10kV
- 5mA charging current
General Radio 1864 Megohmmeter
Megger MIT510 Insulation Resistance Tester 5 kV
- CAT IV 600 V
- Mains or battery powered
- Digital/Analogue backlit display
AEMC 5060 5000V Digital / Analog Megohmmeter
- True megohmmeter®
- Test voltage combinations of 500V, 1000V, 2500V and 5000V
- Insulation measurements from 30kΩ to 10,000GΩ (10TΩ)
Megger MIT525 Insulation Resistance Tester
- Industry best guard terminal accuracy
- Compact and lightweight for easy transport and use PI, DAR, DD, SV and ramp test
- Unique dual case design provides additional user protection
Megger MIT1020/2 10 kV Insulation Resistance Tester
- Increased measurement range to 35 Tera- ohms, in order to provide trending values for the best of insulating materials and highest capital equipment
- Expanded test voltage range from 50 V to 10 kV, in 10 V increments to 1 kV and 25 V increments above 1 kV
- Additional automated standardized tests to include Step Voltage, Dielectric Absorption Ratio and Dielectric Discharge tests
Fluke 1630 Earth Ground Clamp Meter
- A wide ground loop resistance range, from 0.025 Ω to1500 Ω, to satisfy all requirements
- Large jaw opening of 35 mm (1.38 in) for tests on ground conductors and/or equipotential bus bars
- Measurement of ground leakage current, from 0.2 mA to 1000 mA, without needing to disconnect - ideal for system troubleshooting
Fluke 1587 Insulation Multimeter
- Insulation test voltages 50 volts; 100 volts; 250 volts; 500 volts; 1,000 volts
- Live circuit detection prevents insulation test if voltage of more than 30 volts is detected
- Auto-discharge of capacitive voltage for added user protection
Phenix Technologies PAD-10-25 AC/DC Hipot Megohmmeter
- Lightweight, portable and enclosed in a rugged carrying case
- Large, easy to read meters
- Adjustable overcurrent trip point
Megger S1-5010 Diagnostic Insulation Tester
- High specification 5 kV tester
- Automatic test sequences
- PC control and display option
Megger MIT515 5 kV Insulation Resistance Tester
- Industry best guard terminal accuracy
- Compact and lightweight for easy transport and use PI, DAR, DD, SV and ramp test
- Unique dual case design provides additional user protection
Fluke 1520 Megohmmeter
- Three output voltages for insulation resistance testing: 250V, 500V, 1000V
- Insulation resistance testing up to 4000 Meg ohms; switches automatically to voltage measurement when voltage is greater than 30VAC or 30VDC.
- AC/DC voltage measurement up to 600V
General Radio 1863 Megohmmeter
AEMC 3711 Clamp-On Ground Resistance Tester
- Simple and fast clamp-on operation - no leads, no auxiliary rods or spacing requirements. No need to disconnect neutral service
- Direct reading of ground resistance from 0.01Ω to 1200Ω
- Direct reading of continuity and ground loop resistance
AEMC 4500 20k ohm 4 Point Ground Resistance Tester
- Measures soil resistivity (4-Point)
- Measures ground resistance (2 and 3 Point) Fall-of-Potential Method
- Step voltage tests and touch potential measurements
Megger S1-568 Insulation Resistance Tester
- Resistance: 15 TΩ - 5 kV, 35 TΩ - 10 kV, 35 TΩ - 15 kV
- High Current: 6mA short circuit current
- Noise Rejection: 8 mA
AEMC 6474 Ground Resistance Tester
Phenix PM5A Hipot/Megohmmeter 5000 V
- Battery Powered Operation
- Automatic operation with microprocessor control
- Guard circuit for stray leakage current bypass