The Fluke i1010 AC/DC Current Clamp has continuous current ranges of 1 A to 600 A AC and 1 A to 1000 A DC with a Hall-effect sensor measurement type. The Fluke i1010 model is reliable and offers accurate current readings of 2% +0.5 A without breaking the circuit. The maximum conductor diameter is 30 mm (2 x 25 mm).
This oscilloscope probe is an accessory and is only available to rent with an oscilloscope.
See All Oscilloscopes
Features
- Battery-powered Hall-effect probe that extend the current ranges of Fluke tools, measuring DC current from 1 A to 1000 A and AC current from 1 A to 600A
- Provides accurate current reading without breaking the circuit
- Compatible with most Fluke multimeters
- CAT III 600 V safety rating
- Measures AC current to 600 A, DC current to 1000 A
- Output is 1 mV per amp DC or AC
- Maximum conductor size: one 1.18" (30 mm) or two 0.98" (25 mm)
- Accuracy:
- ±(2%+0.5 A), 1 A to 1000 A, 45 Hz to 400 Hz
- ±(3+0.5 A), 1 A to 600 A, 400 Hz to 2 kHz sinewave
Specifications
| Specified Current Range |
AC: 1-600A RMS
DC: 1-1000A |
| Usable Current Range |
0.5-1000A |
| DC Accuracy |
2.0% +0.5A |
| AC Accuracy |
2.0% + 0.5A, 45-400 Hz, Crest Factor ≤ 3
3.0% + 0.5A, 400 Hz- 2 kHz sine wave |
| Bandwidth |
10 kHz |
| Output Signal |
1 mV per amp DC or AC |
| Working Voltage |
600V rms, CAT 3 max at input |
| Load Impedance |
≥1 MW, ≤100 pF |