OMICRON CPC 100 Multi-functional Primary Test System
- Excellent interference suppression facilitates measurement of small signals
- Easy to transport (just 29 kg)
- Ideal for on-site testing
Megger TRAX Transformer and Substation Test System
- Replaces need for multiple test sets
- Saves time by eliminating need for multiple instruments learning
- User-friendly interface reduces training and testing time
Hipotronics 840PL-HD Digital DC Hipot Tester
- DC hipot tests up to 40 kV or 80 kV (depending on model) at load current of 10 mA
- Portable, rugged design for field use with wheels
- Measures output voltage, leakage current, insulation resistance (IR), and polarization index (PI)
High Voltage PTS-200 Portable DC Test Set
- 200 kV DC, 5 mA
- Insulation Resistance up to 20 TΩ
- Full-Wave Bridge Rectifier
Megger VAX020 High Voltage Amplifier
- Separate high voltage amplifier enables capacitance and dissipation factor measurements at 2 kV test voltage
- True and proven DFR/FDS technology for highest performance
- Large frequency range, DC to 1 kHz
High Voltage Inc. PTS-130 | 130 kV
- Two range voltmeter and five range current meter with a 0-1.0 μA low range with resolution to 10 nanoamperes
- Internal HV shorting solenoid with discharge resistor
- Automatic transit protected meters
High Voltage PTS-100 | 100 kVA, 10 mA
- 0-100 kVdc, 10mA
- 120 Vac, 60 Hz, 10A
- 0 – 50/100 kV DC, ±2% F.S.
Hipotronics 880PL-DC | 80kV
- DC hipot test up to 80kV, 10mA
- Lightweight, rugged design for field use (57 lbs / 25.8kg)
- Measures output voltage, leakage current, insulation resistance (IR), and polarization index (PI)
High Voltage PTS-80 DC Hipot Megohmmeter 80 KVDC
- Two range voltmeter
- Five range current meter with a low range with resolution to 10 nanoamperes
- Megohm readings at any output voltage
High Voltage PTS-75 DC Hipot/Megohmmeter Tester 75 kV
- Rugged, reliable and contains all functions needed for periodic electrical maintenance testing & retest of recently installed electrical apparatus
- Insulation Resistance at any rated output voltage up to 7,500 GΩ
- Dual-range voltmeter and five-range ammeter with 0-1μA low scale setting & 10nA resolution for leakage current measurements
Phenix Technologies PAD-10-25 AC/DC Hipot Megohmmeter
- Lightweight, portable and enclosed in a rugged carrying case
- Large, easy to read meters
- Adjustable overcurrent trip point
Tettex MIDAS 2881 Mobile Insulation Diagnosis & Analysing System
- Dissipation Factor (tanδ) and Power Factor (cosΦ )
- Short Circuit Impedance and Excitation Current
- Additional measuring capabilities like Capacitance, Quality Factor, Frequency, Voltage, Current, Power, Losses, Impedance, Inductance, Reactance, Spectrum Analyzer, Digital Scope and Data Logger
Doble M4100 Power Factor Insulation Analyzer
- 47 - 63 Hz
- 25 V - 12 kV Source Output
- Typical Accuracy: ± 0.005%
Doble M4000 Power Factor/Tan-Delta Instrument
- Totally eliminates substation signal interference with Doble's patented Line Frequency Modulation technology
- Generates its own clean test signal for the most reliable and repeatable results
- The highest power to better replicate in service condition
Megger IDAX300 Insulation Diagnostic Analyzer
- Fast and accurate moisture assessment in power transformers
- Well proven technology; IDAX300 units have been in field use for more than 10 years
- Reliable results at any temperature
HV Diagnostics HVA34TD VLF/DC Hipot Tester
- Easy-to-use operator interface
- Integrated Tan Delta measurement system
- Performs automatic and advanced tests
HV Diagnostics HVA28TD VLF/DC Hipot Tester
- 5-in-1 universal high voltage and diagnostic testing system
- Integrated Tan Delta measurement system
- Output current of 0 to 20 mA
HV Diagnostics HVA60 4 in 1 Universal High Voltage VLF and DC Hipot Tester
- VLF (0.1Hz), DC (±), Cable Fault Conditioning (Burning), and Sheath/Jacket Testing modes all included.
- VLF: the proven and accepted replacement for the traditional DC Hipot or “proof” test for solid dielectric cables such as XLPE and EPR
- Fully Automatic or manual cable test sequences complying with International Standards/Guides
HV Diagnostics HVA 30 4 in 1 Universal High Voltage VLF and DC Hipot Tester
- Smallest, lightest, most advanced universal high voltage test instrument available.
- VLF (0.1Hz), DC, Cable Fault Conditioning (Burning), and Sheath/Jacket Testing modes all included.
- Fully Automatic or manual cable test sequences
Hipotronics HHDA13-280 Grounding Stick
- External safety grounding device
- Grounding Stick with a 25 ft braided lead, rated to 120 kV
- Used with 100HVT-DI and 120HVT-DI Hipots
Hipotronics HD140 AC/DC Benchtop Hipot Tester
- Continuously adjustable test voltage
- Shielded output cable
- Adjustable overload from 10 to 110% of rated current output
Hipotronics HD125
- Two Tests in One Unit - Eliminate need for purchasing separate AC and DC Hipot.
- Meets Industry Specifications - Tests to most UL, CSA, VDE, IEC, MIL, BSI, BABT and other industry standards for Dielectric Withstand Testing.
- Rack Mountable - Easy installation into a 19" rack.
Hipotronics HD115 Hipot Insulation Tester
- Two Tests in One Unit - Eliminates need for purchasing separate AC and DC Hipot
- Meets Industry Specifications - Tests to most UL, CSA, VDE, IEC, MIL, BSI, BABT and other industry standards for Dielectric Withstand Testing
- Rack Mountable - Easy installation into a 19" rack
Hipotronics HD103 Hipot Insulation Tester
Hipotronics H306B Hipot Insulation Tester / Megohmmeter