Related Products
 
                                Megger TRAX Transformer and Substation Test System
- Current Output: 200A AC (TRAX 219)
- Current Output: 200A AC (TRAX 220)
- Current Output: 800A AC (TRAX 280)
 
                                HV Diagnostics HVA 4 in 1 Universal High Voltage VLF & DC Hipot Tester
- VLF (0.1Hz), DC (±), Cable Fault Conditioning (Burning), and Sheath/Jacket Testing modes all included.
- VLF: the proven and accepted replacement for the traditional DC Hipot or “proof” test for solid dielectric cables such as XLPE and EPR
- Fully Automatic or manual cable test sequences complying with International Standards/Guides
 
                                    
                             
                                Megger IDAX300 Insulation Diagnostic Analyzer
- Fast and accurate moisture assessment in power transformers
- Well proven technology; IDAX300 units have been in field use for more than 10 years
- Reliable results at any temperature
 
                                High Voltage Inc. PTS-130 | 130 kV
- Two range voltmeter and five range current meter with a 0-1.0 μA low range with resolution to 10 nanoamperes
- Internal HV shorting solenoid with discharge resistor
- Automatic transit protected meters
 
                                    
                             
                                High Voltage PTS-200 Portable DC Test Set
- 200 kV DC, 5 mA
- Insulation Resistance up to 20 TΩ
- Full-Wave Bridge Rectifier
 
                                    
                             
                                Phenix Technologies PAD-10-25 AC/DC Hipot Megohmmeter
- Lightweight, portable and enclosed in a rugged carrying case
- Large, easy to read meters
- Adjustable overcurrent trip point
 
                                    
                             
                                HV Diagnostics HVA68TD VLF/DC Hipot Tester
- Max output voltage (DC): 68kV
- Sinusoidal RMS: 48kVrms
- Integrated Tan Delta
 
                                    
                             
                                Doble M7100
- 0.250–12 kV RMS
- 15–500 Hz Range
- ±0.5% Accuracy
 
                                    
                             
                                High Voltage Inc. DBT Series
- 15kV - 300kV DC
- Benchtop DC Hipot Test System
- Adjustable Test Currents up to 10mA
 
                                    
                             
                                Vitrek V60 Programmable AC-DC Hipot / Electrical Safety Tester Series
- Fully automated testing at the touch of a button or via RS232 & PLC control (GPIB optional)
- Three models to choose from - select the functions you need to get the job done
- Available Quicktest™ test automation software for your PC
 
                                    
                             
                                OMICRON TESTRANO 600 Three-Phase Power Transformer Test System
- Powerful device (3x 33 A DC and 400 V AC)
- One setup for multiple tests, less reconnecting
- Three times faster testing
 
                                    
                             
                                OMICRON TANDO 700 Dissipation Power Factor & Capacitance Test Set
- High voltage potential
- Extendable range
- Flexible use in test labs and in the field
 
                                    
                             
                                High Voltage PTS-80 DC Hipot Megohmmeter 80 KVDC
- Two range voltmeter
- Five range current meter with a low range with resolution to 10 nanoamperes
- Megohm readings at any output voltage
 
                                    
                             
                                High Voltage PTS-75 DC Hipot/Megohmmeter Tester 75 kV
- Rugged, reliable and contains all functions needed for periodic electrical maintenance testing & retest of recently installed electrical apparatus
- Insulation Resistance at any rated output voltage up to 7,500 GΩ
- Dual-range voltmeter and five-range ammeter with 0-1μA low scale setting & 10nA resolution for leakage current measurements
 
                                    
                             
                                High Voltage PTS-100 | 100 kVA, 10 mA
- 0-100 kVdc, 10mA
- 120 Vac, 60 Hz, 10A
- 0 – 50/100 kV DC, ±2% F.S.
 
                                    
                             
                                Tettex MIDAS 2881 Mobile Insulation Diagnosis & Analysing System
- Dissipation Factor (tanδ) and Power Factor (cosΦ )
- Short Circuit Impedance and Excitation Current
- Additional measuring capabilities like Capacitance, Quality Factor, Frequency, Voltage, Current, Power, Losses, Impedance, Inductance, Reactance, Spectrum Analyzer, Digital Scope and Data Logger
 
                                    
                             
                                Megger VAX020 High Voltage Amplifier
- Separate high voltage amplifier enables capacitance and dissipation factor measurements at 2 kV test voltage
- True and proven DFR/FDS technology for highest performance
- Large frequency range, DC to 1 kHz
 
                                Doble M4100 Power Factor Insulation Analyzer
- 47 - 63 Hz
- 25 V - 12 kV Source Output
- Typical Accuracy: ± 0.005%
 
                                    
                             
                                Doble M4000 Power Factor/Tan-Delta Instrument
- Totally eliminates substation signal interference with Doble's patented Line Frequency Modulation technology
- Generates its own clean test signal for the most reliable and repeatable results
- The highest power to better replicate in service condition
 
                                    
                             
                                HV Diagnostics HVA45TD LF/DC Hipot Tester
- High test load capacity of 10 µf
- USB and Bluetooth connectivity
- Automatic, easily programmable test sequences
 
                                    
                             
                                HV Diagnostics HVA34TD VLF/DC Hipot Tester
- Easy-to-use operator interface
- Integrated Tan Delta measurement system
- Performs automatic and advanced tests
 
                                    
                             
                                HV Diagnostics HVA 30 4 in 1 Universal High Voltage VLF and DC Hipot Tester
- Smallest, lightest, most advanced universal high voltage test instrument available.
- VLF (0.1Hz), DC, Cable Fault Conditioning (Burning), and Sheath/Jacket Testing modes all included.
- Fully Automatic or manual cable test sequences
 
                                    
                             
                                Hipotronics HHDA13-280 Grounding Stick
- External safety grounding device
- Grounding Stick with a 25 ft braided lead, rated to 120 kV
- Used with 100HVT-DI and 120HVT-DI Hipots
 
                                    
                             
                                Hipotronics HD140 AC/DC Benchtop Hipot Tester
- Continuously adjustable test voltage
- Shielded output cable
- Adjustable overload from 10 to 110% of rated current output
 
                                    
                             
                                Hipotronics HD125
- Two Tests in One Unit - Eliminate need for purchasing separate AC and DC Hipot.
- Meets Industry Specifications - Tests to most UL, CSA, VDE, IEC, MIL, BSI, BABT and other industry standards for Dielectric Withstand Testing.
- Rack Mountable - Easy installation into a 19" rack.
 
                                    
                             
            
            
            