Megger Smart Thump ST25-30 M1
- Delivers 1600 J at 12.5/25 kV
- 30-kV DC high voltage proof/burn and displays insulation resistance
- E-Tray automatic test sequence to proof test, prelocate and pinpoint
Megger PFL22M1500INV-EN Portable Cable Fault Location System
- Portable, rugged fault locating systems
- HV insulation testing to 20 kV
- Proof/burn up to 20 kV, 115 mA
High Voltage Inc. VT33 VLF Thumper
- VLF cables up to 25 kV rating per IEEE 400.2, VDE DIN 0276 & CENELEC
- 13 kV @ 760 joules impulse rating
- VLF burn cable faults
Megger DigiPHONE+ Cable Fault Pinpointer
- Finds the fault with unprecedented accuracy
- Offers simple visual directions
- Possesses smart background noise reduction
Megger CI Cable Identifier
- Identifies a de-energized primary cable safely
- Identifies live secondary cables up to 240 VAC
- Avoids false positives
Megger MTDR1 Single-Phase Time Domain Reflectometer
- Multiple fault locating methods
- Auto-ranging and auto-fault distancemodes
- Single-phase, two-channel transceiver
Megger DigiPHONE+ NT Pinpointing Receiver Set
- digiPHONE+ Automatic adjustment of values BNR – Background Noise Reduction APM – Auto Proximity Mute when approaching the handle. (acoustic impact protection) 84 dB(A)
- Automatic adjustment of values
- BNR – Background Noise Reduction
Radiodetection RD7200 Cable & Pipe Locator
- Speed, accuracy, and reliable performance
- Easy to setup and use
- High performance audio system and vibration alerts for noisy environments
Dynatel 2273M Cable/Fault Locator
- Locate cable and pipe path
- Measure cable/pipe, or Sonde depth with the push of a button
- Display relative signal current in the cable or pipe
Megger MPP2000 Cable Fault Pinpointer
- Universal pinpoint fault location system
- Ergonomic, rugged, weather resistant case
- Electromagnetic, acoustic and time delay fault location methods
Megger Easyloc
- Locate underground cables and pipe lines quickly and effortlessly
- High dynamic range in passive mode
- Direct connection, inductive coupling and general induction active modes
3M Dynatel 2573-iD Cable/Pipe/Fault and Marker Locator
- Trace view mapping display mode
- 6 active frequencies for direct connect
- 4 induction frequencies with maximum allowed output power
Dynatel 505 Portable Cable and Conductor Identifier
High Voltage Inc. CDS-2010U Cable Fault Locator
- Combination Hipot, Burner and Fault Locator
- Constant energy at each output voltage setting
- Adjustable thump (impulse) repetition rate, from 6 – 10 seconds
Megger PFL32M1500-EN Portable Cable Fault Location System
- Portable, rugged fault locating systems
- HV insulation testing to 20 kV
- Proof/burn up to 20 kV, 115 mA
Dynatel 1420-iD Electronic Marker System Locator
- Large backlit, high-resolution graphic display
- Locator PC tools software
- PC interface via standard RS232/USB
Dynatel 2250M Cable/Fault Locater System
- A easy-to-use system that requires very little operator training
- Trace a pipe or cable and locate markers along the way
- M-iD versions locate and read/write to all EMS-RFiD markers
Hipotronics CF30-8-A Cable Fault Locator / Thumper
- Self-Contained Unit Features Proof Tester, Burner and Thumper in One
- Burn Currents to 50 mA
- Impulse Energies of up to 900 J
Amprobe AT 5005 Underground Cable / Pipe Locator System
- Locates underground energized and de-energized wires, cables and pipes, eliminates exploratory digging in parking lots or under floors for buried pipes and wires
- Signal Select and Distortion Alert icon indicates clean signal of the traced line, versus "ghost" and "return" path signals coming from the neighboring lines
- Three testing modes for best accuracy: Passive Power Mode (50, 60, 100 and 120 Hz) – tracing energized lines conducting current Passive Radio Mode (RF) – using surrounding radio
Megger SMART THUMP ST16 Portable Cable Fault Location System
- Delivers 1500 J at 8/16 kV
- 16-kV DC high voltage proof test and insulation resistance test
- Easy Go automatic test sequence to proof test, prelocate and pinpoint
Megger SG15-1150M HV Cable Fault Locating System
- Dual stage cap 1150 J @ 7.5/15 kV
- Internal filter for arc reflection method
- Internal coupler for surge pulse (ICE) method
Dynatel 573 Sheath Fault/Cable Locator
Dynatel 573DL Cable Fault Locator
Megger HT1000/2 Copper Wire Analyzer
- ACV: 0 V to 250 V (±2%, ± 1 V)
- DCV: 0 V to ±300 V (±2%, ±1 V)
- Resistance: 0 Ω to 1,000 KΩ (±2%, ±1 Ω)
Hipotronics 5250 30kV, 2000 Joule Thumper with TDR
- Highly Portable Lightweight Package
- Output Energy up to 2000 Joules @ Either Voltage Range.
- User Friendly Step by Step Operation