Megger

Megger is a global manufacturer of cutting-edge electrical test equipment, designing everything from its signature megohmmeters to DC loads, cable fault testers, substation test equipment, and more. Electricians, engineers, and a wide array of electrical testing personnel worldwide rent Megger devices to enhance the efficiency, diagnose the failures, and predict the future performance of electrical equipment and systems. Since its origins in the 1800s, Megger has evolved into a leading force in the electrical test industry, focusing on seven vital application markets: cable fault testing, protective relays, circuit breakers, transformer testers, low voltage equipment, motor and generator test instruments, and general electrical test equipment.

Learn more about battery tester machines.

Megger ODEN AT/2X Primary Current Injection Test System The Megger ODEN AT/2X Primary Current Injection Test System is designed for the primary injection testing of protective relay equipment and circuit breakers, along with testing the turns ratio of current transformers and for...

Calibrate

Megger CB-360-DC DC Circuit Breaker Test Set Up to 30,000 A The Megger CB-360-DC DC Circuit Breaker Test Set is a mobile, high-current test set designed specifically for testing DC circuit breakers. Megger CB-360-DC test sets incorporate a variable high-current dc output, control...

Calibrate

Megger Torkel 860 Battery Bank Load Tester The Megger TORKEL 860 is used for systems ranging from 12 to 480 V, and discharging can proceed at up to 110 A. If higher current is desired, two or more Megger TORKEL 860 units or extra load units, TXL, can be linked together....

Calibrate

Megger PFL22M1500INV-EN Portable Cable Fault Location System The Megger PFL22M1500INV-EN Portable Cable Fault Location System provides quick, effective, accurate, and safe fault locations, reducing system outages and minutes lost. The different methods to identify faults and pre...

Megger Torkel 950 Battery Load Unit The Megger Torkel 950 Battery Load Unit is a discharge test system which discharges energy at up to 220A and 500V, providing technicians with a comprehensive insight into battery capacity. Multiple Megger Torkel 950 Battery...

Calibrate

Megger SMRT46 Multi-Phase Relay Tester The Megger SMRT46 Multi-Phase Relay Tester is capable of testing a wide variety of devices, including electromechanical, solid-state, microprocessor-based protective, and motor overload relays. The SMRT46 uses a 4th AC voltage...

Calibrate

Megger BVM600 Battery Voltage Monitor The Megger BVM600 Battery Voltage Monitor is a battery voltage measurement device that is used for the capacity testing of large, industrial battery banks commonly found in electrical power sub-stations, telecom facilities and...

Calibrate

Megger Torkel 840 DC Battery Load Tester The Megger Torkel 840 DC Battery Load Tester is made for battery systems in the range from 12 V to 250 V, often encountered in switchgear and other equipment alike. Discharging can take up to 110 A, and two or more 840 units or...

Calibrate

Megger SMRT36 Three Phase Relay Test System The Megger SMRT36 Three Phase Relay Test System is one of the smallest, lightest, highest powered, complete three-phase relay systems in its industry. The Voltage-Current, or "VIGEN," modules needed for a...

Megger IDAX300 Insulation Diagnostic Analyzer The Megger IDAX300 Insulation Diagnostic Analyzer is a compact, 3-channel input system that provides accurate and reliable insulation assessment for transformers, bushings, generators, and cables. The IDAX300 measures the...

Megger VLF Sine Wave 45 kV Cable Tester The Megger VLF Sine Wave 45 kV Cable Tester, with optional integrated tanδ, is a compact system for commissioning, testing and condition analysis of medium-voltage cables. This unit performs very low frequency (VLF), DC...

Calibrate

Megger MTO330 Automated Six-Winding Transformer Ohmmeter The base model, MTO300, is designed to be remote controlled via PowerDB software on an external PC or a Megger transformer test product with on-board computer. The MTO330 offers the same functionality as the MTO300...

Megger DELTA-4310 Power Factor (Tan Delta) Test Set The Delta-4310 is a fully automatic 12 kV insulation power factor / dissipation factor (tan delta) test set designed for condition assessment of electrical insulation in high voltage apparatus such as transformers, bushings...

Calibrate

Megger TRAX Transformer and Substation Test System The Megger TRAX is a multi-function test system for transformer substation testing. The test system replaces numerous individual testing devices which makes testing with TRAX a time saving and cost effective alternative to...

Calibrate

Megger ODEN AT/3X Primary Current Injection Test System The Megger ODEN AT/3X is a powerful test system designed for primary injection testing of protective relay equipment and circuit breakers. It is also used to test the turns ratio of current transformers and for other...

Calibrate

Megger MVCT VT and CT Analyzer The Megger MVCT VT and CT Analyzer is a portable current and voltage transformer test set with an output power of 300VA, an input range from 0 to 2/10/50/300V, and a current measurement range of 0 to 1.0A. CT Testing...

Calibrate

Megger DLRO200-115 High Current Digital Low Resistance Ohmmeter, 200 Amp The Megger DLRO200-115 High Current Digital Low Resistance Ohmmeter, 200 Amp is a ductor designed to check and measure contact resistance in high voltage circuit breakers, disconnecting switches (isolators), busbar joints, or...

Calibrate

Megger MCT1605 Current Transformer Saturation, Ratio and Polarity Tester The Megger MCT1605 test set is a lightweight, robust, portable unit used to automatically or manually perform saturation, ratio, polarity, demagnetizing tests and insulation tests on current transformers. The MCT provides a...

Calibrate

Seba KMT VLF 27 Portable Test System 27 kV The portable VLF Test System 27 kV of Seba KMT can be used to test the cables in conjunction with the according local regulations for operating voltage levels up to 11 kV for new cables and 16 kV for aged cables at 3 uF cable...

Calibrate

Megger Teleflex VX Reflectometer The Megger Teleflex VX presents the latest development of the Teleflex series. Like all Teleflex reflectometers, the Teleflex VX is specially designed to capture the fast processes during the fault location in power cables. It...

Calibrate

Megger TTR330 Three-Phase Transformer Turn Ratio Test Set The TTR330 offers a new user interface which allows the operator to interact with the PowerDB ONBOARD software system via full QWERTY and navigation keypads as displayed on an 8.4" VGA bright-color screen. One of the...

Calibrate

Megger BITE 2 Battery Impedance Test Equipment The BITE 2 Battery Impedance Test Equipment determines the condition of lead-acid and nickel-cadmium cells up to 7000 Ah. An advanced feature set has been developed that includes Pass/Warning/ Fail calculations based on a user...

Calibrate

Megger FRAX150 Sweep Frequency Response Analyzer The Megger FRAX150 Sweep Frequency Response Analyzer (SFRA) detects potential mechanical and electrical problems that other methods are unable to detect. Major utilities and service companies have used the FRA method for more...

Megger PCA2 On-Load Protection Condition Analyzer Developed in conjunction with a major European utility, the PCA2 incorporates an advanced current injection unit together with a deep-memory high-resolution multichannel current/voltage/contact-event recorder. Both injection...

Calibrate

Megger BGFT Battery Ground Fault Tester The Battery Ground Fault Tracer is an economical, easy-to-use instrument that identifies, traces and locates ground faults in ungrounded dc systems— on-line. It is particularly effective in high electrical noise...

Calibrate

Megger MWA330A 3-Phase Ratio and Winding Resistance Analyzer The Megger MWA30A 3-Phase Ratio and Winding Resistance Analyzer is a portable transformer test device essential for testing power transformers, distribution transformers, CTs and VTz (PTs) and motors / generators. All ratio and...

Megger SMRT1 Single Phase Relay Test System As a stand-alone unit the SMRT1 has the "smart" combination of high compliance voltage and high current to test electromechanical, solid-state and microprocessor-based overcurrent relays, including voltage controlled,...

Calibrate

Megger S1-1068 Insulation Resistance Tester The Megger S1 Insulation Resistance Tester delivers 90-264 V rms of AC voltage at a frequency of 50/60 Hz and 100 A of power, offering to 4.5 hours of continuous testing at 10 kV with a 100 MΩ load. Power utilities and...

Calibrate

Megger MRCT Relay and Current Transformer Test Set The Megger MRCT Relay and Current Transformer Test Set is a light weight, robust, portable unit used to perform demagnetization, ratio, saturation, winding resistance, polarity, phase deviation, and insulation tests on current...

Calibrate

Megger T3090 Time Domain Reflectometer The Megger T3090 is designed to be the most user-friendly radar on the market. Using a radar to pre-locate faults will save time and reduce cable damage. Advanced features include One Button Operation, Automatic Gain and a...

Calibrate

Megger DLRO-H200 Handheld Micro-Ohmmeter 200 A The Megger DLRO-H200 Handheld Micro-Ohmmeter 200 A is a ductor designed to measure the resistance of circuit breaker contacts, bus-bar joints and other high-current links. This product is designed with safety, ease of use and...

Megger FRAX 101 Sweep Frequency Response Analyzer The Megger FRAX 101 Sweep Frequency Response Analyzer (SFRA) detects potential mechanical and electrical problems that other methods are unable to detect. Major utilities and service companies have used the FRA method for more...

Calibrate

Megger Teleflex SX Portable Reflectometer for Fault Location Systems With the Teleflex SX the excellent properties of the successful Teleflex VX were transferred into a smaller, handy and portable design. The Teleflex SX is operated by the new touchscreen and the well proven control knob...

Calibrate

Megger SG15-1150M HV Cable Fault Locating System The Megger SG15-1150M power cable fault locator system is designed to provide safe, quick, accurate, and easy fault locating performance. The SG15-1150M is typically used on 15/25 kV URD circuits which are made of solid...

Calibrate

Megger EGIL Circuit Breaker Analyzer The Megger EGIL, which incorporates benefits gained from experience with our larger instrument, is intended for circuit breakers with one contact per phase. Smaller and simpler, EGIL is equally versatile – and EGIL's...

Megger GOOSER IEC 61850 Test System The Megger GOOSER™ IEC 61850 Test System is a general purpose relay test set ideal for the testing of GOOSE horizontal communication in substation protection and control applications. Megger GOOSER relay test sets convert...

Calibrate

Megger MS-2A Circuit Breaker and Overcurrent Relay Test Set The Megger MS-2A Circuit Breaker and Overcurrent Relay Test Set is used around the world by several thousand utility companies, industrial plants and electrical service organizations. Model MS-2A is a self-contained test set...

Calibrate

Megger DLRO100HB Digital Low Resistance Ohmmeter The Megger DLRO100HB Digital Low Resistance Ohmmeter is a ductor featuring 0.1 μΩ - 1.999 Ω measurement, high noise immunity, IP54 moisture and dust protection. The device's smooth DC output is ideal for...

Megger HVB10 High-Voltage Bridge The Megger HVB10 High-Voltage Bridge is a highly accurate high-voltage bridge designed to locate cable and sheath faults, perform sheath testing, and pinpoint sheath faults, especially suited also for long HV cables. With its...

Calibrate

Megger DigiPHONE+ NT Pinpointing Receiver Set The Megger DigiPHONE+ NT Pinpointing Receiver Set is a fault locating device capable of acoustic and step voltage fault location featuring an acoustic frequency range of 100 to 1500 Hz and a step voltage sensitivity of 5μV...

Calibrate

Megger SPI225 Smart Primary Injection Test System The Megger SPI225 Smart Primary Injection Test System is a high current test system with an output of up to 2000 A. With user-friendly applications, such as the Smart Touch View Interface, the Megger SPI225 makes high current...

Calibrate

Megger EZ-THUMP Portable Cable Fault Locator The EZ-THUMP4 and EZ-THUMP12 are compact and light, battery and AC line operated, portable cable fault location systems. They are designed for quick, effective, accurate and safe fault locating operations to greatly reduce...

Calibrate

AVO/Multi-Amp/Megger CB-845 Circuit Breaker Test Set The AVO / Megger / Multi-Amp CB-845 circuit breaker test set consists of a control unit that incorporates the latest in solid-state metering, control technology and a high-current output unit. The lightweight, two-section...

Calibrate

Megger / Biddle BITE 2P Battery Impedance Tester The Biddle BITE 2P (246004) Battery Impedance Test Equipment determines the condition of lead-acid and nickel-cadmium cells up to 7000 Ah. An advanced feature set has been developed that includes Pass/Warning/ Fail calculations...

Calibrate

Megger 220072 High Voltage DC Dielectric Test Set The Megger 220072 High Voltage DC Dielectric Test Set provides the most dependable, portable dc high voltage sources for checking the quality of electrical power cables, motors, switchgear, insulators, transformers, and...

Megger 247001 Digital Low Resistance Ohmmeter Single-Pak 10 A The Megger 247001 Digital Low Resistance Ohmmeter Single-Pak 10 A is a highly accurate instrument that provide a simple, practical and reliable means of making low-resistance tests in the field. It is also are ideal for...

Megger 651113 Electromagnetic Impulse Detector The Electromagnetic Impulse Detector has been designed to localize faults on buried cable by detecting the magnitude and polarity of current established on a cable during surging with a surge generator. The instrument is...

Calibrate

Megger 830280 Transformer Ohmmeter The Transformer Ohmmeter is a line-operated, field-portable instrument designed specifically to measure the dc resistance of all types of magnetic windings safely and accurately. Its predominant use is the measurement of the dc...

Megger B10E Voltage Power Supply The B10E is a portable self contained test set designed specifically for use in substations and industrial locations. The B10E is intended for testing medium voltage power circuit breakers. Using the latest technology the B10E...

Megger BGL Battery Ground-Fault Locator The Battery Ground-Fault Locator (BGL) simplifies the tracking of ground faults on floating dc-powered control systems. It features automatic operation, can be used on live battery systems and has the unique...

Megger BITE 3 Battery Impedance Tester The Megger BITE 3 Battery Impedance Test Equipment determines the health of lead-acid cells up to 2000 Ah by taking measurements of the most important battery parameters. The BITE 3 measures cell impedance, an internal ohmic...

Megger BM11D (218651CL) Analog / Digital Insulation Tester 5 kV The Megger BM11D (218651CL) Analog / Digital Insulation Tester 5 kV provides a choice of features to suit all applications and budgets. The traditional BM11D instrument became the industry- standard 5 kV tester. It is battery...

Megger BVM (Battery Voltage Monitor) The Megger BVM is a battery voltage measurement device that is used for the capacity testing of large, industrial battery banks commonly found in electrical power sub-stations, telecom facilities and computer data center UPS...

Calibrate

Megger BVM300 Battery Voltage Monitor The Megger BVM300 Battery Voltage Monitor is a battery voltage measurement device that is used for the capacity testing of large, industrial battery banks commonly found in electrical power sub-stations, telecom facilities and...

Calibrate

Megger CFL535F TDR Time Domain Reflectometer The Megger CFL535F TDR is an advanced instrument capable of identifying a wide range of cable faults using Time Domain Reflectometry. The CFL535F can be used on any cable consisting of at least two insulated metallic...

Megger CFL535G Advanced Dual Channel TDR The Megger CFL535G is a state of the art, dual channel, high resolution, compact Time Domain Reflectometer with a color screen for locating faults on paired metallic cables. The CFL535G has a minimum resolution of 0.3 ft /0.1 m...

Calibrate

Megger CI Cable Identifier The Megger CI Cable Identifier will safely identify a dead (or de-energized) primary cable within a group of energized or de-energized cables as well as live secondary cables (including neutrals) up to 240 VAC (460 optional...

Calibrate

Megger CSU20A Current and Voltage Source The Megger CSU20A is a current and voltage source for the SVERKER 750/780. The CSU20A can generate two independent current sources allowing you to use the SVERKER's timer/measurement section to measure two outputs as well...

Calibrate

Megger CTER91 Current Transformer Test Set The Megger CTER-91 current transformer test set is a lightweight, portable unit for performing excitation, ratio and polarity tests on current transformers using the voltage-comparison method. Utilizing the latest technology...

Megger DDA-1600 Circuit Breaker Test Set The Megger DDA-1600 Circuit Breaker Test Set incorporates proven transformer design with the latest development in high-current instrumentation and control. This new design means the DDA-1600 is fully compliant with NEMA AB-4...

Megger DDA-6000 Universal Circuit Breaker Test Set Incorporating the latest technological advancements, the Megger DDA-6000 Universal Circuit Breaker Test Set is designed specifically to test low-voltage power and molded-case circuit breakers equipped with thermal, magnetic or...

Megger DELTA 4000 Series 12 kV Insulation Diagnostic System The new DELTA4000 Series is a fully automatic 12 kV insulation power factor/dissipation factor (tanδ) test set designed for condition assessment of electrical insulation in high voltage apparatus such as transformers...

Megger DELTA 4110 Power Factor Test Set The Megger DELTA4110 is one of the two Power Factor Test Sets that make up the DELTA4000 Series with an external computer (not included). This configuration consists of the DELTA4100 control unit and DELTA4010 high...

Megger DET2/2 Digital Earth/Ground Resistance Tester The Megger DET2/2 Digital Earth/Ground Resistance Tester is a robust compact instrument designed for measuring earth electrode resistance and soil resistivity. The DET2/2 Digital Earth/Ground Resistance Tester uses the four...

Calibrate

Megger DET20C Earth/Ground Resistance & Leakage Current Clamp Tester The Megger models DET20C measure earth/ground resistance and current flow using clamp-on technology. The instruments induce a test current into the system without the need to disturb existing connections. Either unit is a...

Megger DigiPHONE+ Cable Fault Pinpointer The Megger Digiphone Plus pinpoints underground cable faults with unprecedented accuracy and sets a new standard by applying innovative audio concepts. This combination results in a pinpointing device for high resistive faults...

Calibrate

Megger DLRO 10 Digital Micro Ohmmeter The Megger DLRO10 Micro Ohmmeter is ideal for low-resistance measurement, featuring fully automatic testing. Users can select a suitable test current up to 10 A DC to measure resistance from 0.1 µΩ to 2000 &Omega...

Calibrate

Megger DLRO 600 Digital Microhmmeter The Megger DLRO600 digital microhmmeter is a ductor that measures resistances between 0.1 μ Ω and 1 Ω, at high currents. This versatile ductor can provide test currents from 10 amps up to 600 amps subject to the...

Calibrate

Megger DLRO10HD 10 Amp Digital Low Resistance Ohmmeter The Megger DLRO10HD low-resistance ohmmeter is a ductor that augments Megger's DLRO10 and 10X range of low resistance ohmmeters, combines ultimate simplicity of operation with a rugged IP65 case designed for stable...

Calibrate

Megger DLRO10X Digital Low Resistance Ohmmeter The Megger DLRO10X Micro Ohmmeter is suitable for low-resistance measurement, featuring both automatic and manual testing methods. The Megger DLRO10X Micro Ohmmeter offers a >200 kΩ voltmeter input impedance, ±...

Calibrate

Megger Easyloc Utility Line Location System The Easyloc is an automatic line location system, designed to detect underground cables and pipe lines quickly and effortlessly. The Easyloc system comprises of the Rx receiver and the Tx transmitter. The standard receiver can...

Calibrate

Megger EasyTest 20 kV Cable Tester The Easytest represents a simplified version of the standard VLF test. It has been designed to verify operational integrity versus operational reliability, which is the objective of a standard VLF test in accordance with the...

Calibrate

Megger EZ-Restore Cable Fault Locator The Megger EZ-RESTORE features a 1,100-joule output at 12 kV. A DC output of 12 kV to indicate breakdown voltage is optional with this unit. Possessing a measuring range up to 25,000 feet, the EZ-RESTORE offers fault-distance...

Calibrate

Megger HT1000/2 Copper Wire Analyzer The Megger HT1000/2 Copper Wire Analyzer is a high performance, full feature, hand held instrument designed to provide copper wire provisioning and maintenance technicians with the most critical tests at the touch of a button...

Megger L1070 Portable Locator Unparalleled in capability, the L1070 Portable Locator locates buried cable and pipe in various situations. Capable of locating long or short ranges, inductive or conductive, active or passive, the units deliver quick and...

Calibrate

Megger LCI TX-440 Cable Identifier The Megger LCI TX-440 is an active cable identifier, designed for the selection on de-energized cables. The LCI TX-440 allows users to safely identify a dead primary cable within a group of energized or de-energized cables as...

Megger MCTT-10 Current Transformer Tester The Megger MCTT-10 Current Transformer Tester is a portable unit for saturation and ratio testing performed on current transformers by means of the voltage-comparison method. Megger MCTT-10 transformer testers offer a variable...

Calibrate

Megger MIT1020/2 10 kV Insulation Resistance Tester Insulation testing as part of a predictive/preventive electrical maintenance program is becoming increasingly rigorous and demanding. In recognition of the critical significance of such demands, the IEEE revised their motor...

Megger MIT1025 Diagnostic Insulation Resistance Tester 10 kV Offering CAT IV, the Megger MIT1025 Diagnostic Insulation Resistance Tester 10 kV is for the diagnostic testing and maintenance of high voltage electrical equipment. Enclosed in a tough case it is both smaller and lighter than...

Calibrate

Megger MIT510 Insulation Resistance Tester 5 kV The Megger MIT510 Insulation Resistance Tester 5 kV is designed specifically to assist you with the testing and maintenance of high voltage electrical equipment. The case is incredibly rugged and easy to carry, being made of...

Calibrate

Megger MIT515 5 kV Insulation Resistance Tester The Megger MIT515 5 kV Insulation Resistance Tester is smaller and lighter than previous models yet offers advanced features and rapid charge capability. One of the Megger MIT515's key productivity features is the ability...

Calibrate

Megger MIT525 5 kV Insulation Resistance Tester The Megger MIT525 5 kV Insulation Resistance Tester is smaller and lighter than previous models yet offer advanced features and rapid charge capability. A key productivity feature is the ability to take measurements when...

Calibrate

Megger MOM2 Micro-ohmmeter The Megger MOM2 Micro-ohmmeter is a lightweight, handheld unit designed to deliver up to 240 Amps and measure the resistance of circuit breaker contacts, bus-bar joints, and other high-current links. This product is designed...

Megger MPP1000 Pinpointer Specifically designed for service, industrial and power utility companies, the MPP1000 pinpoints faults in cable networks using acoustic, electromagnetic and time of flight methods. The MPP1000 comes in three optional...

Calibrate

Megger MPP2000 Cable Fault Pinpointer The Megger Pinpointer model MPP2000 is specifically designed to accurately and quickly pinpoint faults in underground cable networks. Easy-to-access menus provide advanced users the flexibility and features they desire. ...

Calibrate

Megger MPQ2000 Portable Power Quality Analyzer The Megger MPQ2000 portable power quality analyzer has features which make it ideal for testing power quality in any environment, including rugged, weatherproof hardware, and the ability to power off Phase A or auxiliary power....

Megger MTDR300 3 Phase Time Domain Reflectometer The Megger MTDR300 is a 3-phase Time Domain Reflectometer (TDR) designed to provide quick, effective, accurate and safe prelocation of cable faults in electrical networks. Operation of the instrument is via a single jog dial...

Megger MTO210 Transformer Ohmmeter The Megger MTO210 Transformer Ohmmeter is a line-operated, field portable instrument designed specifically to measure the dc resistance of all types of magnetic windings safely and accurately. It can test transformers and...

Megger OTS60AF/2 Automatic Oil Test Set The Megger OTS60AF/2 Automatic Oil Test Set is an oil dielectric strength tester with a test voltage of 60 kV and a power supply which operates over a range of 100 V to 240V and 50/60 Hz. Microprocessor-controlled and featuring...

Calibrate

Megger OTS60PB Automatic Oil Test Set The Megger OTS60PB Automatic Oil Test Set is a portable, microprocessor-controlled oil tester featuring a test voltage of 60 kV, an internal and rechargeable 12 V power supply and a 1 kV resolution screen. Megger OTS60PB...

Calibrate

Megger PA-2505K Phantom Load The rugged Megger PA-2505K Phantom Load operates from a single-phase source and is designed for field-testing single-phase and polyphase watthour meters at 50 and 100% power factor. The Megger PA-2505K utilizes a heavy-duty...

Calibrate

Megger PAT320 Portable Appliance Tester The PAT320 will carry out all test requirements automatically with one button press. PAT320 is the tester if you need high productivity with a tough and easy to use instrument. If you are moving into portable...

Calibrate

Megger PFL32M1500-EN Portable Cable Fault Location System The PFL32M1500 Power Cable Fault locator is designed to provide quick, effective, accurate and safe fault location, thereby reducing system outages and minutes lost. The instrument comes in a rugged yet portable enclosure...

Megger PFL40A Series Cable Fault Location/High Voltage Test The prime objective of any cable fault location system is to provide quick, effective, accurate and safe fault location, thereby reducing system outages and customer minutes lost. The PFL40A portable fault locating systems are...

Calibrate

Megger PMM-1 Power MultiMeter Multi-function Measuring Instrument The Megger PMM-1 is a portable, battery or line operated, multi-function measuring instrument designed to measure ac primary and secondary currents, voltage power, reactive power, phase angle and frequency of single and three...

Calibrate

Megger S1 Insulation Resistance Tester Series Megger S1 Insulation Resistance Tester Series devices offer AC voltage input ranging from 90-264V rms at 50/60 Hz and 100 VA or 200 VA depending on the model. 5 kV, 10 KV and 15 kV models are available. Power utilities and...

Megger S1-1054/2 Insulation Resistance Tester 10 kV The 10 kV insulation resistance tester from Megger are designed specifically to assist you with the testing and maintenance of high voltage electrical equipment. IEEE 43-2000 recommends the use of 10 kV for motor windings rated...

Megger S1-1568 Insulation Resistance Tester The Megger S1-1568 Insulation Resistance Tester delivers 90-264 V rms of AC voltage at a frequency of 50/60 Hz and 200 A of power, providing to 4.5 hours of continuous testing at 15 kV with a 100 MΩ load. Power utilities...

Calibrate

Megger S1-552/2 Insulation Resistance Tester The new 5 kV insulation resistance testers from Megger is designed specifically to assist you with the testing and maintenance of high voltage electrical equipment. The case is incredibly rugged and easy to carry, being made of...

Calibrate

Megger S1-568 Insulation Resistance Tester The Megger S1-568 Insulation Resistance Tester delivers 90-264 V rms of AC voltage at a frequency of 50/60 Hz and 100 A of power, translating to 6 hours of continuous testing at 5 kV with a 100 MΩ load. Power utilities...

Megger SMART THUMP ST16 Portable Cable Fault Location System The Megger SMART THUMP ST16 Portable Cable Fault Locating System provides safe, efficient and extremely easy-to-use solutions for quickly identifying, prelocating and pinpointing various types of cable faults for power cables...

Megger SMRT410 Relay Tester The Megger SMRT410 test system may be customized by adding the number of Voltage-Current, “VIGEN”, modules needed for specific test applications. The SMRT410 has the “smart” combination of high...

Megger SVERKER 750/780 Relay Test Sets Megger SVERKER 750/780 Relay Test Sets perform secondary tests on protective relay equipment and can test voltage relays with frequency ranges of up to 15 Hz to 550 Hz (780 model). The Megger SVERKER 750/780 tests virtually all...

Calibrate

Megger TDR900 Portable, Handheld Time Domain Reflectometer The Megger TDR900 is an advanced instrument capable of measuring cable lengths and finding distance to an open or a short using Time Domain Reflectometry. It offers exceptional features and a range capability normally...

Calibrate

Megger TM1600 Circuit Breaker Analyzer The TM1600™ circuit breaker analyzer measures a circuit breaker’s timing cycle. The timing channels record closings and openings of main contacts, resistor contacts and auxiliary contacts. Since the timing channels...

Calibrate

Megger TM1800 Circuit Breaker Analyzer The Megger TM1800 Circuit Breaker Analyzer is a system that delivers a stand-alone functionality with one toolbox for all breaker testing. The Megger TM1800 features an expandable modular function and offers safe testing with a...

Megger Torkel 820 12, 24, 48 Volt DC Battery Load Unit The Megger Torkel 820 Battery Load Unit features a unique design that combines efficiency with portability. Using TORKEL 820 you can discharge 24 and 48 V batteries at a current of 270 A, and 12 V batteries at 135 A. Moreover...

Megger TORKEL 900 Battery Load Unit The Megger TORKEL 900 series is used to perform load/discharge testing which is the only way to determine battery systems actual capacity. Together with the optional cell voltage logger, BVM, connected directly to the TORKEL...

Megger TTR100 Single Phase Handheld TTR The Megger TTR100 is an automatic handheld, battery operated transformer turns ratio test set used to measure the turns ratio, excitation current, phase displacement, dc resistance and polarity of windings in single- and three...

Megger TTR310 Three-Phase Transformer Ratio Test Set The TTR310 has the ability to store test results, upload results to a PC (via RS232 serial port), and/or print them in the field via optional thermal paper printer, without the use of an external computer. Please note: The...

Calibrate

Megger TXL Extra Load Units for Torkel Test Systems These resistive extra loads do not perform any regulating functions. They are designed for use together with TORKEL battery load units. Their purpose is to provide higher load currents for use in constant current or constant...

Megger VCM100 Oil Test Set Calibration Meter The Megger VCM100 is a calibration meter suitable for verifying the calibration of oil test sets. The meter will enable the high voltage output to be checked, traceable to national standards, and is suitable for all recent...

Calibrate

Megger VIDAR Vacuum Interrupter Tester The Megger VIDAR is a vacuum interrupter (VI) tester that enables the user to check the integrity of the vacuum interrupter quickly and conveniently by means of the known relationship between the flashover voltage and the...

Megger VLF Sine Wave 34 kV Medium Voltage Diagnostic Test Set The VLF sine wave 34 kV is a compact, robust and portable VLF sine wave test system for medium voltage cables. The design, optimized for rapid transportation and quick setup, and the continuous duty cycle are two attributes...

Megger/HDW/SebaKMT OWTS HV150, 150 kV PD Tester for HV Cables The Megger/HDW/SebaKMT OWTS HV150, (150 kV PD Tester for HV Cables) is used to identify, evaluate and locate partial discharge (PD) faults in cable insulation and accessories in all types of high voltage power cables. The...

Megger/HDW/SebaKMT OWTS M28, 28 kV Partial Discharge Analyzer The Megger/HDW/SebaKMT OWTS M28, 28 kV Partial Discharge Analyzer is used to identify, evaluate and locate partial discharge (PD) faults in a cable insulation and accessories in all types of medium voltage cables. The system...

Megger/HDW/SebaKMT OWTS M60, 60 kV PD/Fault Location System The Megger/HDW/SebaKMT OWTS M60, 60 kV PD/Fault Location System is used to identify, evaluate and locate partial discharge (PD) faults in a cable insulation and accessories in all types of medium voltage cables. The system...

Multi-Amp/Megger CB-832 Circuit Breaker/Overload Relay Test Set The Megger CB-832 test set is a high-current circuit breaker and overload relay test set. The CB-832 is designed to test the circuit breaker and overload relays by means of primary current injection. The CB-832 is a self...

Megger Ferrolux Rx Line and Fault Location System The Megger Ferrolux Rx Line and Fault Location System locates lines and cable faults with a high level of precision as it combines several functions in one device. These include the Supermax and SignalSelect (signal flow...

Megger Ferrolux FL 10 Cable Fault Locator The Megger Ferrolux FL 10 Cable Fault Locator is the solution for your day-to-day tasks. You can use the Ferrolux FL 10 Cable Fault Locator system to quickly and easily find cable faults. Users can locate lines just as quickly,...

Megger MTDR1 Single-Phase Time Domain Reflectometer The Megger MTDR1 Single-Phase Time Domain Reflectometer is used to locate cable faults utilizing pulse-echo, arc reflection, transient analysis, and differential arc reflection methods. Both of the methods used on the Megger...

Calibrate

Megger DELTA-4310A Power Factor (Tan Delta) Test Set The Megger DELTA-4310A Power Factor (Tan Delta) Test Set is part of the Delta 4000 series. This unit tests an assortment of high voltage devices and can test for power factor, dissipation factor (tan∂), excitation current,...

Megger SR-98 Protective Relay Test Set The Megger SR-98 Protective Relay Test Set is a part of the SR Series and uses digital signal processor technology. The SR-98 is durable and user-friendly making it the ideal device for technicians completing relay testing...

Megger MTO250 Transformer Ohmmeter The Megger MTO250 is a transformer ohmmeter with the capacity to test transformers up to 1000MVA and perform DC current testing up to 50A. A line-operated and field-ready unit built to determine magnetic winding resistance...

Megger TTR330A Three-Phase Transformer Turns Ratio Test Set The Megger TTR330A is a portable three-phase transformer turns ratio test set capable of measuring turns ratio of power, distribution, and instrument transformers in a manufacturing or substation environment. A capable design...

Megger TTRU3 True 3 Phase Transformer Turns Ratiometer The Megger TTRU3 is an advanced transformer turns ratiometer with a 3Ø voltage output and step up turns ratio testing. Able to easily evaluate phase shifting and zig-zag transformers and perform ten second 3Ø tests...

Megger VAX020 High Voltage Amplifier The Megger VAX020 is a 2kV high voltage amplifier for the IDAX 300S insulation diagnostic analyzer. Expanding the voltage range of the IDAX 300S from 200V to 2kV, the VAX020 allows for more accurate testing in high-interference...

Megger MLR10 10 Amp Leakage Reactance Tester The Megger MLR10 Leakage Reactance Tester is used to measure short circuit impedance and leakage reactance in high voltage transformers. With the ability to perform tests such as inductance, impedance, reactance, and power...

Megger OTD Oil Dielectric Test Set The Megger OTD oil dielectric test setmeasures Tan Delta, Resistivity, and Relative Permittivity of insulating liquids in a laboratory environment. Designed to maximize lab productivity, the OTD provides insights on the quality...

Megger DLRO10HDX Dual Power 10A Micro-Ohmmeter The Megger DLRO10HDX low resistance ohmmeter blends ease of use with a sturdy design to maximize usability in all locations. Able to deliver 10A measurements up to ranges of 250 mΩ and 1A up to 2.5 Ω, the...

Megger S1-5010 Diagnostic Insulation Tester The Megger S1-5010 Diagnostic Insulation Tester provides advanced measurements of insulation resistance for a variety of electrical equipment. Able to perform test at 500V, 1000V, 2500V, and 5000V, the S1-5010 performs a wide...

Megger SMRT410D Multi-Phase Relay Test System The Megger SMRT410D test set is a versatile, multi-phase relay test system. The SMRT410D relay test system is both portable and durable, built for use in a wide range of environments and climates. The multi-phase test system...

Megger EVCC300 Battery Charger Tester The Megger EVCC300 Battery Charger Tester introduces an innovative method of testing electric vehicle charge points. The device features a voltage range of 5 V to 300 V and a frequency range of 45 Hz to 65 Hz. The Megger...

Megger MIT1525 15kV Insulation Resistance Tester The Megger MIT1525 15kV Insulation Resistance Tester features various test modes, including IR, IR(t), DAR, PI, SV, DD, and Ramp Test. This unit has a short circuit/change current of 3 mA @ 5 kV, 10 kV, and 15 k. The MIT1525...

Megger ADX Automated Static Motor Analyzer The Megger ADX Automated Static Motor Analyzer is an automated diagnostic test instrument with a high-definition interface, innovative applications, and more. With a processor speed of 1.0 GHz (Quad core) and XGA 1024 x 768...

Megger Baker AWA IV-4 Static Motor Analyzer | 4 kV The Megger Baker AWA IV-4 Static Motor Analyzer is part of the AWA-IV Series. The device has a 4 kV HO. With a surge test output voltage of 0 to 4250 V and DC hipot test output voltage of 0 to 4000 V...

Megger BITE5 Battery Impedance Tester The Megger BITE5 Battery Tester features 100 to 240 V AC (50/60 Hz) input power and 12 V DC at 2.5 A output power, ideal for battery impedance testing and battery discharge testing. The Megger BITE5 model is capable of...

Narrow Your Results

Megger

Product Subcategories