Tektronix 2246 4-Channel Oscilloscope

Discontinued

The Tektronix 2246 4-Channel Oscilloscope features 4 independent channels and a 100 MHz frequency. The 2246 model can measure the low-level signal with 2 mV/div vertical sensitivity at full bandwidth. The Tektronix 2246 also offers hand-free triggering with auto-level mode, suitable for a wide range of applications, including logic design and repair, communications, power supply design, and more. The Tektronix 2246 4-Channel Oscilloscope has simple and rugged construction, allowing maximum testing durability.

Product Info Related Products

Vertical System	Display Modes - CH 1, CH 2, CH 3, CH 4, Add (CH 1 + CH 2) Invert (CH 2) Alternate and Chopped display switching for all channels 20 MHz bandwidth limiting
Channel 1 and Channel 2	Frequency Response - 100 MHz Step Response - <= to 3.5 ns Deflection Factor Range - 2 mV/div to 5 V/div Input Characteristics - 1 M ohms
Channel 3 And Channel 4	Frequency Response - Same as Channel 1 and Channel 2 Step Response - Same as Channel 1 and Channel 2 Deflection Factor - 0.1 V/div and 0.5 V/div Input Characteristics - 1 M ohms
Horizontal System	Display Modes - A (main sweep), A Alternate with B (delayed sweep), and B. In X-Y mode, Channel 1 provides X-axis (horizontal) deflection
	A Sweep Time Base Range - 0.5 s/div to 20 ns/div x10 magnification extends fastest sweep rate to 2 ns/div
	B Sweep Time Base Range - 5 ms/div to 20 ns/div x10 magnification extends fastest sweep rate to 2 ns/di
	Delay Time - Range: <0.1 div to >9.9 div of the A sweep
	Delta Time - Range: 0 to >10 div to right of the delay time setting
Triggering	Trigger from CH 1, CH 2, CH 3, CH 4 source. DC Coupled Noise Reject Coupled HF Reject Coupled LF Reject Coupled AC Coupled
X-Y Operation	Deflection Factors - Same as Vertical Systems X-Axis -3 dB Bandwidth - 3 MHz or more
Cursor and Front Panel Display	SEC; 1/SEC; Phase; Delta Time; Delta 1/Time; Delta Phase Volts; GND Volts Track/Measurement, Trig Level, Ground
Voltmeter	DCVolts + Peak and - Peak Volts P - P Volts
Input Characteristic	1 Mohm ±0.15% shunted by 20 pF ±0.5 pF Maximum Input Voltage: 400 V (DC+ peak AC); 800 V ac p-p at 10 kHz or less