Related Products

IFI SMCC1000 Solid State Amplifier

  • VSWR Reflected Power Protection
  • Open and Short Circuit Protection
  • GPIB IEEE 488 and RS232 Remote Control
Amplifier Research 1000S1G6C RF Amplifier

Amplifier Research 1000S1G6C RF Amplifier | 1000W 1 - 5 GHZ, 700W 5-6 GHz

  • Output Power: 1000W CW (1 - 5 GHz)
  • Gain: 64 - 68 dB
  • Noise Figure: 10 dB

Empower 2170 Solid State Broadband High Power Amplifier 1 GHz - 3 GHz, 1000 W

  • Solid-state linear design
  • Suitable for CW, AM, FM and pulse (consult factory for other modulation types)
  • Compact modular design

Amplifier Research 100S1G4 Solid State Amplifier

  • Portable, self-contained, and air-cooled
  • Designed instantaneous bandwidth, high gain, and linearity required applications
  • Digital Control Panel (DCP) which provides both local and remote control

ENI/E&I 1040L LF Power Amplifier, 10KHz - 5 MHz, 400 Watts

  • The 1040L produces 400 Watts of linear class B output power over a frequency range of 10 to 5MHz, with a nominal gain of 55dB (± 1dB).
  • Matched Output Load Impedance: 50 ohms; the amplifier will supply full power to any load impedance between 40 and 60 ohms resistive.
  • Drive Source Requirements: Any signal generator, function generator, or oscillator capable of up to 0.7 Vpp output into 50 ohms.

Teseq CBA 1G-275 Class A Broadband Amplifier, 80 MHz - 1000 MHz, 250 Watts

  • Class A linear and low distortion design
  • High Reliability gallium arsenide technology
  • Mismatch tolerant and unconditionally stable

E&I 503L Power Amplifier 2 MHz - 510 MHz, 3 Watts

IFI CMC50 Solid State RF Amplifier | 1 MHz - 1 GHz, 50W

  • Digital Display Monitors: Power Supply Currents, Voltage, Forward RF Power, Reflected RF Power, Total Hours, Operate Hours,
  • Status Indicators: Power On, Standby, Operate,
  • Faults: Overcurrent, VSWR Overload, Thermal Overloads, Power Supply

Advanced Amplifiers AA-118G-50 Solid-State High Power Amplifier | 1.0 - 6.0 & 6.0 - 18.0 GHz, 50 W

  • Designed for EMI/RFI, lab, CW/Pulse, and all communication applications
  • Small form factor, rack mounted dual-band system
  • Class A/AB Linear design

Advanced Amplifiers AA-2100M-2000 Solid State Amplifier | 2 - 100MHz, 2000W

  • Rack mounted system
  • Class AB linear Solid-State design
  • Instantaneous wide bandwidth

IFI S31-500-900P | Dual Mode CW/Pulse

  • VSWR Reflected Power Protection, the unit operates without damage or oscillation into any magnitude of phase or load impedance, Open and Short Circuit Protection.
  • GPIB IEEE 488 and RS232 Remote Control
  • RF Sample Port on the Front Panel, 112R for rear panel

Ophir 5227RE Broadband High Power RF Amplifier

  • Covers the 80-1000 MHz frequency range
  • 500 W broadband
  • Low harmonics, high gain, and excellent stability

Amplifier Research 50S1G4A Solid-State Amplifier 0.8 - 4.2 GHz, 50 W

AE Techron 7794 4-Quadrant Power Amplifier

  • Stable when driving a wide range of resistive, inductive or capacitive loads
  • 60A continuous at 13.8 VDC
  • 200A in-rush current capability

Ophir 5205F Solid State RF Amplifier 0.5 GHz - 3 GHz, 40 W

Advanced Amplifiers AA-16G-150 Solid State Amplifier | 1.0 - 6.0 GHz, 150 W

  • 3U Bench Top or Rack mounted system
  • Class AB linear GaN design
  • Instantaneous ultra wide bandwidth

IFI SCCX150 Solid State RF Power Amplifier

  • VSWR Reflected Power Protection
  • Open and Short Circuit Protection
  • GPIB IEEE 488 and RS232 Remote Control

Milmega AS0822 Broadband Amplifier, 0.8 GHz-2.2 GHz, 27 Watts

  • 15 way rear mounted D-type allowing remote operation via TTL commands whilst providing access to an output signal sample
  • All data is measured at 25 OC driven from a 50 R source and driving into a 50 R load
  • Input power (for rated output) 5 dBm

Ophir 5089 Linear Power RF Amplifier

  • Solid-state broadband high-power RF amplifier
  • 1000 Watt broadband amplifier
  • Frequency range of 10 kHz - 200 MHz

Advanced Amplifiers AA-618G-100 Solid State Amplifier

  • Rack mounted system
  • Class AB linear GaN design
  • Instantaneous wide bandwidth

Ophir 5060 Broadband High Power RF Amplifier 0.8 GHz - 4.2 GHz

Ophir 5115E Linear Power RF Amplifier 10 kHz - 225 MHz, 2500 Watts

AE Techron 7226 Linear Power Amplifier, 40kHz - 600kHz, 900 Watts

  • Up to 2X the long-term power of the 7224 atfrequencies above 40 kHz
  • Stable when driving highly capacitive loads
  • Four-quadrant operation

Amplifier Research 1200A225 CW Solid State Amplifier, 10KHz - 225 MHz, 1200 Watts

  • 10 kHz to 225 MHz
  • 1200 W CW
  • Portable

Advanced Amplifiers AA-100M1G-200 Solid State Amplifier | 100 - 1000 MHz, 200 W

  • Rack mounted system
  • Class AB linear LDMOS design
  • Instantaneous wide bandwidth