Amplifier Research 120S1G3M1 0.8 - 3 GHz, 120 Watt Amplifier

Amplifier Research 120S1G3M1 0.8 - 3 GHz, 120 Watt Solid State Amplifier
Enlarge Image
Amplifier Research 120S1G3M1
Request Quote Print Page
Datasheet
The Amplifier Research 120S1G3M1 0.8 - 3 GHz, 120 Watt Solid State Amplifier is a portable, self-contained, air-cooled, broadband amplifier designed for applications where instantaneous bandwidth, high gain and linearity are required. Push-pull circuitry is utilized in all high power stages in the interest of lowering distortion and improving stability. The AR 120S1G3, when used with a sweep generator, will provide a minimum of 120 watts of RF power.

The AR 120S1G3 is equipped with a Digital Control Panel (DCP) which provides both local and remote control of the amplifier. The DCP uses a digital display, menu assigned softkeys, a single rotary knob, and four dedicated switches (POWER, STANDBY, OPERATE and FAULT/RESET) to offer extensive control and status reporting capability. The display provides operational presentation of Forward Power and Reflected Power plus control status and reports of internal amplifier status. Special features include a gain control, internal/external automatic level control (ALC) with front panel control of the ALC threshold, pulse input capability and RF output level protection. Also included is an internal RF detector which provides an output for use in self-testing or operational modes.

All amplifier control functions and status indications are available remotely in GPIB / IEEE-488 and RS232 format. The buss interface connector is located on the back panel and positive control of local or remote operation is assured by a keylock on the front panel of the amplifier. The low level of spurious signals and linearity of the AR 120S1G3 make it ideal for use as a driver amplifier in testing wireless and communication components and subsystems. It can be used as a test instrument covering multiple frequency bands and is suitable for a variety of communication technologies such as CDMA, W-CDMA, TDMA, GSM etc. It is also suitable for EMC Test applications where undistorted modulation envelopes are desired.
 

Specifications:

 
Rated Power Output 120 watts minimum
Input for Rated Output 1.0 milliwatt maximum
Power Output @ 3dB Compression Nominal: 140 watts
Minimum: 120 watts
Power Output @ 1dB Compression Nominal: 122 watts
Minimum: 100 watts
Flatness ±1.5 dB typical
±2.0 dB maximum
Frequency Response 0.8 - 3.0 GHz instantaneously
Gain 51 dB minimum