Amplifier Research 500W1000B Solid State Amplifier 500 Watts CW, 80MHz–1000MHz

Rent Amplifier Research 500W1000B Solid State Amplifier 500 Watts CW, 80MHz–1000MHz
Enlarge Image
Amplifier Research 500W1000B
Request Quote Print Page
Datasheet
The Amplifier Research 500W1000B is a self-contained, air -cooled, broadband, completely solid-state amplifier designed for applications where instantaneous bandwidth and high gain are required. Push-pull circuitry is utilized in all high power stages in the interest of lowering distortion and improving stability. The Model 500W1000B, when used with an RF sweep generator, will provide a minimum of 500 watts of swept power.

The Amplifier Research 500W1000B is equipped with a Digital Control Panel (DCP) which provides both local and remote control of the amplifier. The DCP uses a digital display, menu assigned softkeys, a single rotary knob, and four dedicated switches (POWER, STANDBY, OPERATE and FAULT/RESET) to offer extensive control and status reporting capability. The display provides operational presentation of Forward Power and Reflected Power plus control status and reports of internal amplifier status. Special features include a gain control, internal/ external automatic level control (ALC) with front panel control of the ALC threshold, pulse input capability and RF output level protection. Also included is an internal RF detector that provides an output for use in self-testing or operational modes.

All amplifier control functions and status indications are available remotely in GPIB/IEEE- 488 format and RS-232 hardware, and fiber optic. The buss interface connector is located on the back panel and positive control of local or remote operation is assured by a keylock on the front panel of the amplifier.

Housed in a stylish contemporary equipment rack the Model 500W1000B provides readily available RF power for typical applications such as RF susceptibility testing, antenna and component testing, watt meter calibration, and use as a driver for higher power amplifiers. The export classification for this equipment is EAR99. These commodities, technology or software are controlled for export in accordance with the U.S. Export Administration Regulations. Diversion contrary to U.S. law is prohibited.
 
Amplifier Research 500W1000B Specs
Rated Power Output 500 watts minimum
Input For Rated Output 1.0 milliwatt maximum
Power Output @ 3 dB Compression Nominal 575 watts, 525 watts min up to 500 MHz
475 watts min from 500 to 1000 MHz
Power Output @ 1 dB Compression Nominal 500 watts, 450 watts min up to 500 MHz
400 watts min from 500 to 1000 MHz
Flatness ±1.5 dB maximum
±1.0 dB typical
Frequency Response 80 MHz - 1000 MHz instantaneously
Gain (at maximum setting) 57 dB minimum
Gain Adjustment (continuous range) 25 dB minimum
Input Impedance 50 ohms, VSWR 1.5:1 maximum; 1.3:1 typical
Output Impedance 50 ohms nominal