AE Techron 7136 AC/DC Amplifier with Precision DC Power Supply
- 180V RMS at 5 amps
- User-variable DC offset: ±2V or ±20V
- User-adjustable current limit: 1A to 25A
Adaptive Power Systems APS 3090 Power Converter
Adaptive Power Systems APS1010 10 kVA Frequency/Voltage Converter
- Input: 220vac, 3 Phase, 60Hz
- Output: 0>300V, 1 Phase, 45-500Hz
- Phase: 3Φ/3W + ground
Adaptive Power Systems APS1030 Frequency Converter
- Programmable Voltage, Dual Range
- Programmable Frequency
- Current Limit Protection
Adaptive Power Systems APS3015 15KW AC Power Supply
- Frequency of 47 to 63 Hz
- Easy-to-read LED displays: frequency, voltage, current, power, and power factor
- 3 programmable memory locations for voltage, frequency, and current
Adaptive Power Systems APS 3030 Power Converter
AE Techron CIS-25 EMC Testing Kit
- Combines into a single, complete package the items needed to accurately test to important Aviation standards like DO-160 sections 18 and 19
- Included with the kit are three coupling transformers (T1000, T2000, and T3700)
- Includes the DSR 100-25 test system and the CR 600 Chattering Relay accessory
Adaptive Power Systems FC205 AC Power Supply 500VA
- 500VA Output Power
- 45-500Hz Output Frequency
- Easy to read LED Displays
California Instruments 10001IX AC / DC Power System
- Single Box AC Power System- combines AC & DC power source, digital scope and power analyzer in one instrument
- DC Output Capability
- 10000 VA AC Power Level
Elgar 1001B AC Power Source 1000VA
Elgar 1001C AC Power Supply, 0-1kVA
- Output Voltage Ranges: 0-125V (0-250V may also be available)
- Output Frequency Range: 15-10,000 Hz. Click here to see Oscillators for further specifications. Not compatible with 9000 series controllers.
- Output Power (VA): 1000
California Instruments 1001P AC Power Source 270 Volt, 1000 VA
CA Instruments 1001WP AC Power Supply
Pacific Power 115ASXT AC Power Source, 1.5 kV
- 22 Waveform Library – Arbitrary Waveform Generator
- 15 to 1,200 Hz Operation – 5,000 Hz Bandwidth
- Precision Voltage Programming – 0.05% with CSC engaged
Pacific Power 118-ACX 1.8 kVA Single Phase AC Power Source
- Universal (115-240V, 1Ø, 50/60Hz.)
- PFC input with inrush current limiting.
- Single Phase, Dual range; 0-150V/0-300V output
Elgar 1203SL 1.2 kVA, 3 Phase AC Power Source
- Output Voltage Ranges: 0-65VAC RMS, 0-130VAC RMS, 0-260VAC RMS
- Output Power: 400 VA per phase, 1200 VA total
- Frequency Range: 45 Hz to 5 kHz
California Instruments 1251RP Programmable AC Power Source
- Programmable power
- 1250 VA output power
- Front and rear outputs
Pacific Power 125AMX Single Phase Linear AC Power Source
Pacific Power 134310 AMX Series Magnetics Module Transformer
Pacific Power 134350 AMX/ASX Series Magnetics Module Transformer
California Instruments 15001IX AC / DC Power System
- Single Box AC Power System. Combines AC & DC power source, digital scope and power analyzer in one instrument
- DC Output Capability Use same instrument for DC output
- 3000 VA to 15000 VA AC Power Levels Match power source and cost to application requirements
California Instruments 15003iX Programmable 15 kVA Power Supply
- Combination AC and DC Power Source and Power Analyzer (Replaces several instruments with a single multifunction unit)
- 3000 VA to 30000 VA of Output Power (Capable of handling a wide range of loads with 0 to 1 power factor)
- Arbitrary Waveform Generation (Test products for harmonics immunity)
California Instruments 1501TC Single-Phase 1.5 kVA Power Source
- Power Output: 1500 VA at 130 to 110 volts rms output with power factor of unity to ±0.7
- Output Voltage Ranges: 0 to 32.5 volts rms, 0 to 65 volts rms, 0 to 130 volts rms and 0 to 260 volts rms
- Total Harmonic Distortion: less than 0.3% distortion at midband (200 to 600 Hz), and less than 0.5% distortion from 45 Hz to 5 KHz.
California Instruments 1503L AC Power System
Elgar 1751B AC Power Supply
- Output Power: 0-1750VA, Single Phase
- Power Factor: Unity to ±.7
- Output Voltage: 0-32 VAC, 0-130 VAC, 0-260 VAC
Elgar 1751SX 1750VA AC Power Source
- Continuous Power Output: 1750 VA, 1 Phase
- Peak Power Output: 12,865 VA, 1 Phase
- Output Voltage: 0-65/40.4/125;0-130/20.2/62.5;0-260/10.1/31.25
Elgar 1753B Triple Phase, 1750 VA, AC Power Source
- Low effective output impedance
- Input circuit breaker/on-off
- Pilot light
Teseq 2145 45kVA 3-Phase Flicker and Harmonics Measuring System
- AC fast switching unit for standards specified in the IEC 61000-4-11
- Unit has two inputs, AC source and AC Mains
- Allows for single or three phase mode testing
California Instruments 2253IX AC/DC Power Source Analyzer
- Combination AC / DC Power Source and Power Analyzer
- Single & Three Phase Operation
- Arbitrary Waveform Generation
Elgar 2253M 2250 VA, 3 Phase AC Power Supply
- Output Voltage: 0-130VAC RMS L-N
- Five Output Voltages, 3 Phase: 1. 3 650VA/V 130VRMS 45-5kHz 1 52VA 26 VRMS 400 Hz 1
- 1. 3 650VA/V 130VRMS 45-5kHz
Elgar 2253SL 2.25 kVA, 3 Phase AC Power Supply
- Minimum Total Volt Ampere Rating: 2250
- OUTPUT 3 PHASE Three Output Voltage Ranges: 0-65/130/260 VAC 0-65 VRMS - 17.3 A max 0-130 VRMS - 8.65 A max 0-260 VRMS - 4.3 A max Frequency Range (Hz): 45 to 5 k
- Programming capabilities with 9023 controller (click here for more info) Programmable via IEEE 488 GPIB Programmable Current Limit - Auto Shut Down and Reporting
California Instruments 2300CL Harmonics and Flicker Calibrator
- 2300W
- 100-240VAC
- 178 mm (7 inch) high-rack chassis
Solar 2352-1 Audio Power Amplifier, 15 Hz - 150 KHz
California Instruments 2501T Invertron AC Power Source, 2.5 kVA
- Total VA: 2,500
- Voltage Ranges RMS Volts, L-N: 0-30, 0-60, 0-120, 0-240; 27.5-30
- Full Power Voltage Ranges: 55-60, 110-120, 220-240
Elgar 251B AC Power Source
- Output Voltage Ranges: 0-32, 0-130, 0-260
- Output Frequency Range: 45-5,000 Hz. Click here to see Oscillators for further specifications.
- Output Power (VA): 250
California Instruments 251TC Single - Phase AC Power Source, 250 VA
- Output power: 250 VA
- Standard Output Voltage (L-N): 0-135, 0-270
- Full Power Frequency Range: 45Hz to 5kHz.
Solar 2654-2 Lightning Transient Generator System for DO-160
- The controller and power supply module
- Waveform timing
- The high voltage power supply
Solar 2854-1 Transient Generator
- For MIL-STD-461F CS106 conducted transient susceptibility test
- Adjustable pulse position on AC lines relates the transient susceptibility to real time aspects of digital systems
- Single-pulse feature for controlled isolation of transient effects
Solar 2854-2 Spike Generator
- Provides output levels from 10 V to more than 400 V into 5 Ω
- Adjustable pulse position on AC lines relates the transient susceptibility to real time aspects of digital systems
- Single pulse feature for controlled isolation of transient eects
CA Instruments 3000CS AC Current Source
- Precision Current Source
- Single and Three Phase Modes
- Arbitrary Waveform Generator
Elgar 3001 3kVA, AC Power Source
- Output Voltage Ranges: 0-32, 0-130, 0-260
- Output Frequency Range: 45-5,000 Hz. Click here to see Oscillators for further specifications.
- Output Power (VA): 3000
California Instruments 3001iX AC Power Supply
- Combination AC and DC Power Source and Power Analyzer
- 3000 VA - 15000 VA of Output Power
- Arbitrary Waveform Generation
Pacific Power 305AMXT-UPC32 Linear AC Power Source
- 0.25% 20 - 2000 Hz
- 0.5% 2000 - 5000 Hz
- 0.1% THD from 20 - 1000 Hz
Pacific Power 3060-MS Solid State Frequency Converter 62.5 kVA
- Maximum system reliability.
- Unmatched performance/price ratio.
- Rugged, powerful output.
Dranetz 3105 Precision Power/Harmonic Analyzer
- Instant calculation of harmonic distortion of plus amplitude, percent and phase of each harmonic
- Calculation of power in Watts, VA or VAR and power factor, as well as network impedance
- Fast on-the-spot printed records with date and time recorded
Pacific Power 3120-ASX 12kVA Programmable AC Power Source
- 22 Waveform Library – Arbitrary Waveform Generator
- 15 to 1,200Hz Operation – 5,000 Hz Small Signal Bandwidth
- Precision Voltage Programming – 0.05% with Continuous Self-Calibration (CSC) engaged
Pacific Power Source 3120AMX AC Power Source, 12 kVA
- IEEE-488.2 or RS-232C with SCPI compatibility
- LabVIEW for Windows®/LabWindows® drivers
- Waveform Creation by Harmonic Synthesis
Pacific Power 3120AMXT AC Power Source | 12 kVA
- IEEE-488.2 or RS-232C with SCPI compatibility
- LabVIEW for Windows®/LabWindows® drivers
- Waveform Creation by Harmonic Synthesis
Pacific Power 312AMX Programmable AC Power Source | 1200 W
- Voltage distortion, no switching noise
- Fast voltage and current slew rates
- Exceptionally Low Output Impedance and High Peak Current Capability
Pacific Power 3150AFX AC & DC Programmable Power Source
- AC output, DC output, AC+DC output
- DC, 15 to 1,200 Hz frequency range
- Single, constant power mode 300V L-N/520V L-L/425Vdc voltage range offers wider operating range
Pacific Power 315ASX High Performance AC Power Source
- 1 phase / 3 phase Selectable Output from front panel or bus command
- 15 to 1,200 Hz. Operation – 5,000 Hz small signal bandwidth
- Precision Voltage Programming – 0.05% with Continuous Self-Calibration (CSC) engaged
Pacific Power 318AMX AC Power Source
- IEEE-488.2 or RS-232C with SCPI compatibility
- LabVIEW for Windows®/LabWindows® drivers
- Waveform Creation by Harmonic Synthesis
Pacific Power 320AMX Linear AC Power Source, 2 kVA
- Advanced Linear Amplifiers Provide Very Low Voltage Distortion, no Switching Noise, Fast Voltage and Current Slew Rates, Exceptionally Low Output Impedance and High Peak Current Capability
- 1, 2, or 3 Phase Output Form selectable from front panel or bus command
- 20 to 5,000 Hz. Full Power Bandwidth Operation – 5Hz to 50KHz small signal bandwidth, 3dB at 10% of full voltage
Pacific Power 320ASX Single / Three Phase AC Power Supply | 2000 VA
- 22 Waveform Library – Arbitrary Waveform Generator
- 15 to 1,200 Hz Operation – 5,000 Hz Bandwidth
- Precision Voltage Programming – 0.05% with CSC engaged
Pacific Power 320LSX High Performance AC Power Source
- Single phase output from front panel or bus command
- Precision voltage programming: 0.05% with continuous self-calibration (CSC) engaged
- True-RMS metering of volts, amps, and power
Pacific Power 3210AGX | AC & DC Load/Power Supply | 21 kVA
- 3-in-1 grid simulator, power source, and load
- 4 quadrants
- Fully regenerative
Pacific Power 3210RGS-4C Regenerative Grid Simulator
- 12kVA / kW to 21kVA / kW in 4U chassis
- Parallel up to 168kVA/kW 333A per cabinet
- Dual cabinets up to 252 kVA / kW
APT 340XAC 1Ø 4kVA / 3Ø 12kVA Modular AC Power Source
- Input Phase: 1Φ Voltage: 180 - 264 VAC Frequency: 47 - 63 Hz
- Phase: 1Φ
- Voltage: 180 - 264 VAC
Pacific Power 3500 AZX Regenerative AC and DC Power Source | 50 kVA, 50 kW, 3P
- Full power source and sink capability
- Full 100% of current and power rating in both source and sink mode
- Parallel configurations for higher power
California Instruments 351TC-PC350 VA Single - Phase AC Power Source
- Output power: 350 VA
- Standard Output Voltage (L-N): 0-120, 0-240
- Full Power Frequency Range: 45Hz to 5kHz.
Pacific Power 360AMX AC Power Supply
- Rated Power (VA): 6000
- Output Form:3
- Output Volts - Max (VRMS): 135/270, 135(L-N)
Pacific Power 360AMXT Modular, Programmable 6 kV AC Power Source
- Rated Power (VA): 6000
- Output Form:3
- Output Volts - Max (VRMS): 135/270, 135(L-N)
Pacific Power Source 360ASX 6 kVA Power Source
- 22 Waveform Library – Arbitrary Waveform Generator
- 15 to 1,200 Hz Operation – 5,000 Hz Bandwidth
- Precision Voltage Programming – 0.05% with CSC engaged
Pacific Power 360LMX Linear AC Power Source
- Precision voltage programming: 0.05% with continuous self-calibration (CSC) engaged
- True-RMS metering of Volts, Amps, and power
- Color touch screen front panel operation
APT 360XAC 1Ø 6kVA / 3Ø 18kVA Modular AC Power Source
- Input Phase: 1Φ or 3Φ Voltage: 180 - 457 VAC Frequency: 47 - 63 Hz
- Phase: 1Φ or 3Φ
- Voltage: 180 - 457 VAC
Pacific Power Source 390AMXT 9 kVA Power Source
- IEEE-488.2 or RS-232C with SCPI compatibility
- LabVIEW for Windows®/LabWindows®drivers
- Waveform Creation by Harmonic Synthesis Option
Pacific Power 390G 6 kVA Three Phase AC Power Source
- Programmable AC test power, 45 to 5000 Hz
- Power line susceptibility tests: spike, sag, surge
- Flexible, expandable lab power
Teseq NSG 4070B
- Integrated signal generator 9 kHz – 1 GHz
- 3 power meter inputs 9 kHz – 1 GHz
- Integrated class A power amplifier module for different applications: 35 W, 150 kHz – 230 MHz; 40 W, 10 kHz – 400 MHz 45 W, 9 kHz – 1 GHz; 80 W, 150 kHz
California Instruments 4500iL AC Power Source, 4.5kVA
California Instruments 5001iX AC Power Source
- Combination AC and DC Power Source and Power Analyzer
- 3000 VA - 15000 VA of Output Power
- Arbitrary Waveform Generation
Elgar 501B 0-65/130/260V 500VA, AC Power Supply
- Output Voltage Ranges: 0-65 VRMS, 0-130 VRMS, 0-260 VRMS
- Output Frequency Range: 45-5,000 Hz
- Power Factor: ±0.7 at full VA
CA Instruments 6000LS AC Power Source, 6000 VA
Elgar 6006A 1000 VA 5000 Peak, AC Line Conditioner
- Input Voltage Range: 94 - 138
- Output: - Power (VA): Cont.: 1000; Peak: 5000 - Voltage (VRMS): 115 - Frequency (Hz): 57 - 63
- Input/Output Isolation: 100 dB (60Hz)
Chroma 61500 Series Programmable AC Power Sources
- Compact size and weight attributable to advanced PWM technology
- AC+DC output mode for voltage DC offset simulation
- Programmable slew rate setting for changing voltage and frequency
Chroma 61505 Programmable AC Power Source 4 kVA, 192 A
- Compact size and weight attributable to advance PWM technology
- AC+DC output mode for voltage DC offset simulation
- Programmable slew rate setting for changing voltage and frequency
Chroma 61509 Programmable AC Power Source
- 5U high power density design
- Single-phase or three-phase output selectable
- Programmable slew rate setting for changing voltage and frequency
Chroma 61511 AC/DC Power Source, 12kVA
Chroma 61512 AC Power Source
- Programmable voltage and current limit
- Programmable slew rate setting for changing voltage and frequency
- Single-phase or three-phase output selectable
Chroma 61601 Programmable AC Power Source 500 VA, 15 Hz - 1 kHz
- Low output impedance for testing IEC 61000-3-2
- Compact size and weight attributable to advance PWM technology
- Built-in PFC, provide input power factor over 0.98 (full load)
Chroma 61603 Programmable AC Power Source 1.5 kVA, 750 W
- Low output impedance for testing IEC 61000-3-2
- Compact size and weight attributable to advance PWM technology
- Built-in PFC, provide input power factor over 0.98 (full load)
Chroma 61604 Programmable AC Power Source 2 kVA, 96 A
- Compact size and weight attributable to advance PWM technology
- Built-in PFC, provide input power factor over 0.98 (full load)
- AC+DC output mode for voltage DC offset simulation
Chroma 61611 AC/DC Power Source
- Single-Phase or Three-Phase output selectable
- Programmable slew rate setting for changing voltage and frequency
- Programmable Voltage and Current Limit
Chroma 61612 Programmable AC/DC Power Source
- Single-phase or three-phase output selectable
- Programmable slew rate setting for changing voltage and frequency
- Programmable voltage and current limit
Chroma 61703 Programmable AC Power Source 4.5 kVA, Three Phase
- Built-in PFC, provides input power factor over 0.98
- Advanced PWM technology delivers high power density in a compact rack-mountable package
- Built-in output isolation relays
Chroma 61704 Programmable AC Power Source 6 kVA, 1 kW
- Built-in PFC, provides input power factor over 0.98
- Advanced PWM technology delivers high power density in a compact rack-mountable package
- Built-in output isolation relays
Chroma 61705 Programmable AC Power Source 12 kVA, 192 A
- Built-in PFC, provides input power factor over 0.98
- Advanced PWM technology delivers high power density in a compact rack-mountable package
- Built-in output isolation relays
Solar 6254-5S RFI Transient Generator
- Spike Amplitude: Continuously adjustable from less than 10 volts to more than 250 volts peak.
- Repetition Rate: Continuously adjustable from 0.5 to 500 p.p.s.
- Rise Time: Less than 1.0 microsecond.
Chroma 6404 300 Volts, 375VAC, 45-500Hz Single Phase AC Power Source
Chroma 6430 3000VA Programmable AC Power Source 45-1000Hz
- High accuracy measurement for RMS voltage, RMS current, true power, frequency, power factor and current crest factor
- Built-in power factor correction circuit provides input power factor over 0.98 to meet IEC regulations.
- Programmable current limit
_30.jpg)
Chroma 6460 Programmable AC Power Source | 6000 VA
- High accuracy measurement for RMS voltage, RMS current, frequency, true power, and more
- Built-in power factor correction circuit provides input power factor
- Programmable current limit
Chroma 6530 Programmable AC Source 0~300V/15~2KHz / 3KVA
- Programmable Sine, Square, or Clipped Sine waveform output Programmable voltage, current limit, frequency, phase, and distortion
- Power line disturbances simulation capability
- 30 factory-installed harmonic waveforms in the waveform library
Solar 6552-1A 10 Hz - 100 kHz, 100 Watt Audio Amplifier
- Input Voltage: 0.6 volt for maximum power output at 1000 Hz.
- Input Impedance: 500-600 ohms.
- Output Power: 100 watts at 1 KHz into 2.4 ohms.
Solar 7054-1 Spike Generator for MIL-STD-461 CS106
- Provides output levels from 10 volts to more than 600 volts into 5 ohms or less. Delivers more than 300 kw peak into 0.5 ohms load.
- Adjustable pulse position on a.c. lines relates the transient susceptibility to real time aspects of digital systems.
- Single pulse feature for controlled isolation of transient effects.
Solar 7054-2 Spike Generator 600 V
- 10 V to 600 V Output
- Delivers < 300 kW Peak to a .5 Ω Load
- Pulse Position on AC Lines Adjustable - Relates Transient Immunity to Real Time Aspects
Solar 7054-2B Spike Generator
- 0° to 360°
- Periodically 50, 60 or 400 Hz Sine Wave
- Provides output levels from 10 V to 400 V into 5 Ω. Delivers more than 300 kW peak into 0.5 Ω load
Solar 7399-2 2,500 Volt Spike Generator for MIL-STD-1399
- Repetitive spikes up to 2500 volts peak at two pulses per minute.
- Single non-synchronous spike actuated by a push button on the panel.
- Sync functions provide for placing the spike on the power frequency waveform of 50, 60 or 400 Hz power lines. The spike can be moved to any point of the sine wave from 0 to 360°
California Instruments 751TC 750 VA Single - Phase AC Power Source
- Power Output: 750 VA at 110 to 130 volts rms output from unity to ±0.7 power factor
- Output Voltage Ranges: 0 to 130 volts rms and 0 to 260 volts rms as determined by rear panel straps
- Total Harmonic Distortion: less than 0.30% distortion from 200Hz to 600Hz; less than 0.5% distortion from 45 Hz to 5 KHz
Solar 8282-1 Transient Pulse Generator
- Provides outputs up to 600 volts peak amplitude for the 0.15, 5.0 and 10.0 S spikes into a five ohm resistive load (low source impedance).
- A wide range of repetition rates allows spike injection in terms of the pulse rates of items being tested.
- The single pulse feature enables controlled isolation of transient effects.
Keysight 85901A AC Power Source
Solar 8850-1 Sweep Generator for MIL-STD-461 CS01/CS101
- Manual or automatic frequency sweep from 30 Hz to 100KHz
- Digital display of frequency and output voltage level or injection voltage level
- Remote sensing of voltage being injected into the Equipment Under Test
Solar 8850-2 High Power Sweep Generator
- Manual or automatic frequency sweep from 30 Hz to 150 KHz
- Digital display of frequency and output voltage level or injected voltage level
- Remote sensing of voltage being injected into the Equipment Under Test
Solar 9354-1
- Panel mounted digital Voltmeter displays the open circuit discharge voltage
- Automatic or manual trigger for damped sinewave. Manual only for double exponential pulses
- Variable peak output voltage (adjustable from 0.1 to 100% of selected circuit discharge voltage
Solar 9354-2 Transient Generator for MIL-STD-461 and DO-160
- Panel-mounted digital voltmeter. Monitors the adjusted open circuit discharge voltage
- Pulse rates up to one pulse per second maximum (factory adjusted)
- Single pulse feature enables controlled isolation of transient effects
Solar 9355-1 for MIL-STD-461D/E CS115
- Panel-mounted digital meters monitor the adjustable charged line voltage and pulse repetition rate.
- Adjustable pulse rate from 0.6 p.p.s. to 150 p.p.s., and manual triggering via front panel push button.
- Charged line output voltage adjustable from 1.0 V to >2000 V
Solar Electronics 9554 Variable Frequency Modules
- Variable frequency modules
- Comes in several configurations
- Specialized module for military and aerospace applications
California Instruments 971XP 975 VA AC Power Supply
- Power Output (0.7 Power Factor): 975 VA @ TA=25°C 750 VA @ TA=55°C
- 975 VA @ TA=25°C
- 750 VA @ TA=55°C
B&K Precision 9833 Programmable AC Power Source
- AC, DC and AC+DC power source
- Low total harmonic distortion meets the IEC 61000-3-2 standard
- Comprehensive measurements Vrms, Arms, Vdc, +Apk, -Apk, inrush current, Hz, power factor, apparent power, reactive power, true power, and crest factor
Advanced Analyzers AA-HFA-1-16 | 1 ph, 16 A
- 16-bit USB based data acquisition: works with laptops and PC
- Very accurate Windows-7, 8, 10 compatible power analyzer with data storage
- Advanced reporting, data storage, and replay features
Advanced Analyzers AA-HFA-3-75-Z-REF-Z-TEST | 3 ph, 75 A
- 0 - 36 A-rms
- 0 - 100 A-pk for 10 seconds
- 1 - 15000 VA
EM Test ACS 500N2.3 Single Phase AC/DC Voltage Source, 2 kVA
- Voltage range: 0V to 330V AC/DC
- Voltage resolution: 0.025% (12 bit)
- Output frequency: DC, 10Hz to 80Hz
Preen AFV Series Programmable AC Power Sources | 10 - 2000 kVA
- RS-232
- RS-485
- RS-485
Preen AFV 33060 Programmable AC Power Source
- 60 kVA
- 45-500 Hz
- 3-phase input/output
Preen AFV-P-2500 | Programmable AC Source | 2000 W, 20 A
- Compact and high power density: 600VA to 2500 VA is only 2U and 5000 VA is 5U.
- AC source with DC output: extend the applications to DC testing
- Wide output voltage of 0-310V and output frequency of 15-1000 Hz
Preen AFV-PLUS-33200 AC Power Source
- 200 kVA output power
- Voltage output: 300V
- Output frequency: standard 45 - 65Hz
California Instruments Asterion AST2253 AC/DC Power Source | 2250 VA, 0 – 400 VAC
- Intuitive touch panel control
- Innovative iX2™ current doubling technology
- Multi-language display for global operation
California Instruments Asterion AC Series Programmable AC / DC Power Sources
- High power density in 1U chassis, up to 1.5kVA
- Intuitive touch panel control
- Innovative iX2™ current doubling technology
Behlman BL3300 High Power AC Power Supplies
- Multi-Pulse Input Rectification – Low Harmonic Distortion
- Analog Remote Control – Remote Programming
- Low cost per VA – Cost Savings
CA Instruments BPS75 AC Power Supply | 75 kVA
- High power AC source
- Expandable power levels
- Remote control with standard RS232, USB, and IEEE-488 (GPIB)
EMC Partner CN-BT6 Accessory for MIL3000 Test System
EMC Partner CN-MIG-BT5 Accessory for MIL3000 Test System
Montena CS106 Pulse Generator
EMC Partner CS115REC Plug-in Module for MIG2000-6
- Current range into 100ohm: 1A up to 10A
- Rise time: < 2ns
- Fall time: < 2ns
EMC Partner CS116-10K10M Plug-in Module for MIG2000-6
- Current range into 100ohm: 0.02A up to 0.2A
- Frequency rang : 10 kHz to 10 MHz
- Damping: 4th peak 40 to 50%
California Instruments CSW5550 Programmable AC/DC Power Source, 5550VA
- Combination AC and DC Power Source
- 40-5,000Hz Output Frequencies
- Arbitrary and Harmonic Waveform Generation
Elgar Continuous Wave (CW) AC Power Supply Series
- Low THD and AC noise
- Advanced Measurement Available
- Wide range PFC Input
Elgar CW2501M AC Power Source
- Wide range PFC Input
- Low THD and AC noise
- Advanced Measurement Available
Elgar CW2501P AC Power Supply
- Wide range PFC Input
- Low THD and AC noise
- Advanced Measurement Available
EMC Partner DC-S17CL Accessory for MIL3000 Test System
EM Test DPA 500N Single Phase Power Analyzer with Harmonics & Flicker
- Real-time data acquisition
- Internal hard disk for data storage
- 16-Bit A/D converter
EM Test DPA 503N Power Analyzer per IEC 61000-3-3, IEC 61000-3-11 and IEC 60725
- Real-time data acquisition
- Internal hard disk for data storage
- 16-Bit A/D converter
Pacific Power ECTS2-3500Z 50 kVA Power Source
- AC only or AC and DC Test Systems
- Single Phase and Three phase Output Modes
- Regenerative Systems Available
Electro-Metrics EM-4310 Spike Generator
- 1.0 A at 115 VAC
- 0.5 A at 230 VAC
- Power Requirements: AC Power Sources: 115 VAC, 50-60 Hz, 1.0 A 230 VAC, 50-60 Hz, 0.5 A
EM Test Harmonics & Flicker Test System for IEC/EN 61000-3-2/3-3
- Real-time data acquisition
- Internal hard disk for data storage
- 16-Bit A/D converter
Montena EMP10K-5-500 Short Pulse Generator | 10 kV
- Short pulse generator
- Meets MIL-STD188-125-1/2 standards
- Generates short-duration double exponential current pulses
Montena EMP230K-2-23 NEMP Generator
- Technology and design scales up to a charging voltage of 1.2 MV.
- Interlock switch and automatic capacitor discharge for high safety requirements.
- Compact and robust construction.
Montena EMP25K-2-23 NEMP Generator | 50 kV/m for RS105
- Rise time of 2.3 ns ±0.5 ns
- Uses direct capacitive circuits or Marx technology
- Interlock switch for safety
Montena EMP300K-5-500 Short Pulse Generator | 350 kV
- Short pulse generator
- Evaluates conductive entries and protective devices per MIL-STD188-125-1/2
- Short double exponential current pulses up to 5 kA
Montena EMP80K-2-23-50 NEMP Generator
- Technology and design scales up to a charging voltage of 1.2 MV
- Interlock switch and automatic capacitor discharge for high safety requirements.
- Compact and robust construction.
Montena EMP80K-5-500 Short Pulse Generator 80 kV
- Short pulse generator
- Meets MIL-STD188-125-1/2 standards
- Short double exponential pulses
EMC Partner Fx-DO-160-S19 Plug-in Module for MIG2000-6
- Modular construction allows for future expansion
- Clean reproducible waveforms
- Simple operation
Montena GP20-01-2 High Speed Pulse Generator 20kV, 400A
CNS Poway HFA-16/75 1 Phase Harmonics & Flicker Analyzer
- ISO-17025 accredited device
- 16 bit USB based data acquisition
- PLL based sampling method
Advanced Analyzers HFA-3-36-REF Harmonics and Flicker Analyzer | 3 ph, 36 A
- Up to Harmonic 40
- Can be optionally selected to show 2 - 9 kHz
- 0 - 350 V-rms ±500 Volt peak std
Newtons4th IMP16 IEC Reference Impedance Network
Newtons4th IMP753 Impedance Network
Kikusui KHA1000 16A/1PH Harmonics/Flicker Analyzer for IEC 61000-3-2 & 3-3
- No need for a PC for compliance testing
- Customization of test conditions
- Easy-to-view screen and real-time measurement
Kikusui KHA3000 Harmonic/Flicker Analyzer for IEC61000-3-2/3/11/12, IEC61000-4/7/15
- Supports harmonic and flicker compliance testing of single-phase and three-phase equipment
- Installed with the latest standards of both harmonic and flicker limits
- No need for a PC for compliance testing
Pacific Power M6204 IEC Flicker Impedance Unit
- Three phase flicker impedance network
- Z-ref impedance values per IEC 60725
- Compatible with 360AMXT and 3120AMXT AC source models
EMC-Partner MIG2000-6 Modular Impulse Generator
- Solid state impulse switch and solid state polarity change (no mechanical switch, no spark gaps or tubes) - advantages: low jitter, no high frequency switching noise,
- Microprocessor menu controlled, printer port and RS232 remote control
- Safety in accordance with VDE 0104 (safety circuit, connector for warning lamp)
EMC Partner MIL-MG3 Military Test System
- Positive
- Negative
- Electronic Switching
Teseq Mil-Std-461 CS114 10kHz - 400 MHz Conducted Susceptibility Test System
- Signal generation: NSG 4070-0
- Modulator: included in NSG 4070-0
- Power meter: 3x included in NSG 4070-0
EMC Partner MIL3-10K10M Plugin for MIL3000 Test System
EMC Partner MIL3-30M100M Plugin for MIL3000 Test System
EMC Partner MIL3-DO-160-S17 Plugin for MIL3000 Test System
EMC Partner MIL3-DO-160-S19 Plugin for MIL3000 Test System
EMC Partner MIL3-REC Plugin for MIL3000 Test System
EMC Partner MIL3-SPIKE Plugin for MIL3000 Test System
EMC Partner MIL3000 Military Test System
- Exceeds maximum test levels in MIL-STD-461
- One coupler for tests (CS115 & CS116)
- Test report data stored in MIL3000, accessible via USB or Ethernet
Solar Electronics 7399-3 Spike Generator
- Repetitive spikes up to 2500 V peak at two pulses per minute
- Single non-synchronous spike actuated by a pushbutton on the panel
- Sync functions provide for placing the spike on the power frequency waveform of 50, 60 or 400 Hz power lines; the spike can be moved to any point on the sine wave from 0 to 360°
CA Instruments MX30-3 AC/DC Power System | 30 kVA, 3 Phase
- Programmable AC and DC power for frequency conversion and product test applications
- Arbitrary & Harmonic Waveform Generation: User defined voltage waveform and distortion programming
- Regenerative, bidirectional "Green" Power Solution: Automatic crossover between Source and Sink power mode offers regenerative capabilities in AC mode. Regenerate up to 100% of the rated
California Instruments MX45 AC Power Source | 45 kVA, 3P
- Three Phase Mode Phase mode programming on MX30-3Pi and MX45-3Pi allows for a three-phase output
- Phase mode programming on MX30-3Pi and MX45-3Pi allows for a three-phase output
- High Power AC and DC Power Source Programmable AC and DC power for frequency conversion and product test applications
CA Instruments MX90 90kVA Power Source and Compliance Test System
- Combines AC/DC source and power analyzer functions
- AC, DC and AC+DC Operating Modes
- Powerful output transient generation
California Instruments MX Compliance Test System Series
- Direct PC bus access data acquisition system provides the required sampling rate and resolution to meet IEC 61000-4-7 measurement requirements and supports high speed data transfers, unlike competing
- PC based Harmonic and Flicker test software provides real-time full color data display updates and continuous PASS/FAIL monitoring.
- Automatic calculation of the maximum permissible system impedance Zsys, using the Zref and measured Flicker parameters, as required per EN/IEC 61000-3-11.
Newtons4th N4AX-03 Advanced AC+DC Power Source
- DC~3kHZ bandwidth (10kHz small signal)
- Better than 0.3% THD
- Isolated output
EM Test Netwave Series, Single Phase AC/DC Power Source
- Wide Power Bandwidth; DC - 5kHz
- Output Power up to 7,500VA AC and 9,000W DC
- Output Voltage max. 360V AC and +/- 500V DC
EM Test 3-Phase Netwave Series AC/DC Power Supply
- Wide Power Bandwidth; DC - 5kHz
- Output Power up to 60,000VA AC / 72,000W DC
- Output Voltage up to 3*360V AC (p-n), +/-500V DC
Teseq NSG 1007 AC & DC Power Sources
- Combination AC and DC power source and power analyzer
- Arbitrary waveform generation
- Built-in digital power analyzer
Teseq NSG 1007-5 Single Phase AC and DC Power Source
- 5 kVA AC Source L-L three phase input
- Single phase output
- Arbitrary waveform generation
Teseq NSG200D with NSG203A Interference Simulator
- Line voltage: 220 / 240V - 50 Hz
- Option: 110V - 60 Hz
- Max rated current through line filter: 16 Amp
Teseq NSG 4060 Low Frequency Immunity Test System
- Signal generator and integrated power amplifier 15 Hz to 150 kHz
- Meets IEC / EN 61000-4-16 in combination with the Extension Unit
- Meets IEC / EN 61000-4-19 and other standards
Teseq NSG 4070-75 Conducted & Radiated Immunity Test System
- Integrated signal generator 9kHz to 1GHz
- 4-channel power meter 9kHz to 1GHzAn advanced combination of signal generator and compact immunity test system.
- Integrated power amplifier module for different
California Instruments PACS-1 Harmonics/Flicker Test System
- AC Line Distortion Compensation - PCTS Software compensates for AC Line distortion.
- PC Based Operation - Simple to use Windows GUI automates and documents test procedures and easily accommodates future IEC standard changes.
- Upgradable to Full Compliance Level - PCTS can be field upgraded to full compliance by adding a California Instruments AC Power Source.
Preen PAS Series Grid Simulators | 45 - 2000 kVA, 3P
- Three phase output power from 45-2000kVA
- Built-in low voltage ride through (LVRT) function to easily simulate required utility grid conditions
- Regenerative function can sink the energy from load and return to the grid
Preen PFV Series Regenerative AC Power Source
- Regenerative function can sink the energy from load and return to the grid
- Three phase independent control to set voltage of each phase
- Phase angle control to set angle between each phase
Montena PG-C201 High Current Damped Oscillatory Wave Generator
- One single output for up to 12 test frequencies
- Frequency range 10 kHz – 100 MHz
- Control software running on a PC
Montena PG-CS115 Pulse Generator 5 kV
Montena PG1275 Surge Generator
- Standard: MIL-STD-1275D
- Transients supported: imported and exported spikes imported and exported surges
- imported and exported spikes
Montena PG1275E Surge Generator for MIL-STD 1275E
- Generator can be fully controlled by a computer through a RS232 or an USB interface
Montena POG-CS116-9 Transient Generator 10 kHz - 100 MHz
Newtons4th PPA5531 Flicker and Harmonics Analyzer
- Fully Compliant Harmonics and Flicker Test Solutions
- Leading wideband accuracy Basic 0.01% with class leading high frequency performance
- ISO17025 accredited ISO17025 IEC61000 certification available
Montena PPG-E1-1200 Portable Pulse Generator for MIL-STD-188-125
- A wide operating range from 50 A to 1.2 kA
- Dedicated control software application for the configuration of the generator and the measurement equipment
- Battery powered, especially designed for tests onsite
Teseq ProfLine 2100 Harmonics and Flicker Measuring System
Teseq Profline 2103 3 kVA Harmonics & Flicker Measuring System
- Low cost system for small DUTs
- Complete test system including clean power source
- Simulated flicker impedance, no need for expensive physical impedance
Teseq Profline 2105 | 1 ph, 5 KVA
- 5 kVA output power
- Immunity test system that is simple to upgrade, pc-based
- Accessible control interface
Phase Perfect PT-330 Digital Phase Converter
- Balanced three-phase voltages
- High efficiency
- Electronic power factor correction
Phase Technologies PT020 Phase Converter
- NEMA 1 Enclosure
- Digital Display
- 1-Year Warranty
Preen PWF-L 33045 Programmable AC Power Source
- Wide-range output frequency for aerospace and military applications
- Three phase independent control to set voltage of each phase
- Phase angle control to set angle between each phase
California Instruments RS90 AC DC Power Source | 90 kVA
- High Power AC and DC Power Source: Programmable AC DC power for frequency conversion and product test applications.
- Expandable Power Levels: Available output power of 90 kVA per unit and multi-unit configurations for power requirements up to 540 kVA and above.
- Arbitrary & Harmonic Waveform Generation: User-defined voltage waveform and distortion programming.
California Instruments SQ0045C1C Grid Simulator | 45 kVA / 45 kW | 1, 3P
- Dual Voltage ranges that support over voltage testing on 480 V based systems
- Instrument Setups for quickly re-establishing the known instrument state
- 500uS time resolution for Transients
Elgar SW10500-1-3-2 10.5kVA Smartwave System 1/3 Phase
Elgar SW5250-3-3-2-1 AC Power Source
- 0-5250 VA
- Single/Triple Phase
- 5 kHz Bandwidth
Elgar SW5250A-1-3-2 Power Source, 5250 VA
- Powerful Waveshape and Waveform Creation
- Sequence Programming
- AC and/or DC Output
Elgar SW5250AE-1 AC Power Supply
- 0-5250 VA
- Single/Triple Phase
- 5 kHz Bandwidth
Elgar SW5250S-3 AC/DC Power Supply Slave Unit
- Height: 8.75" (222 mm)
- Width: 19" (483 mm)
- Depth: 23.5" (597 mm)
Elgar SW5550A High Performance AC Power Supply
California Instruments Tahoe | TA0045A1 Power Supply | 45 kVA
- Dual Voltage ranges that support over voltage testing on 480 V based systems
- Separate terminal blocks for single phase and 3 phase outputs
- High Power AC and DC Power Source
Pacific Power SCU UPC32 Controller
EMC Partner VERI-MIL3 Accessory for MIL3000 Test System
Yokogawa WT3000 Precision Power Analyzer
- Basic accuracy: 0.01% of reading
- Basic power accuracy: 0.02% of reading
- 30A current input element
Yokogawa WT5000 Precision Power Analyzer
- Unmatched basic power accuracy of ±0.03%
- 10 MS/s, 1MHz power bandwidth, 18 bit resolution enabled by Yokogawa isoPRO™ fiber optic isolation technology
- Precision current measurement guaranteed by innovative symmetric coaxial shunt design