Associated Research OMNIA II 8207 Electrical Safety Compliance Analyzer
- Built-in AC Power Source
- 4-Wire Measurement
- Arc Detection
Chroma 19036 Wound Component EST Analyzer
- 5 in 1 (10 channels) composite analyzer (ACWV/DCWV/IR/Impulse/DCR)
- Hi-pot test 5kVac / 6kVdc HSCC (High Speed Contact Check) 500 VA output
- 5kVac / 6kVdc
Associated Research 8104 Hipot/Ground Tester
- Dielectric Withstand Test Mode Output Rating: 5 kV @ 40mA AC and 20mA DC Voltage Setting Range: 0-5000 V AC; 0-5000 V DC Resolution: 1 V Accuracy: ± (2% of setting + 5
- Output Rating: 5 kV @ 40mA AC and 20mA DC
- Voltage Setting Range: 0-5000 V AC; 0-5000 V DC Resolution: 1 V Accuracy: ± (2% of setting + 5 volts)
Quadtech Guardian 6000 Plus Electrical Safety Analyzer
- Twin Port - Simultaneous Hipot & GB
- Programmable Output Voltage to 5KV AC and 6KV DC
- Ground Bond Testing to 30A AC (to 40A with Optional Transformer)
Vitrek 95X Series Hipot Testers
- Highest Level of Operator Safety
- High Power Output
- Wide Range of built-in Voltage Capabilities
Vitrek 955i Ultra-High Performance Hipot Tester
- High power output
- Wide range of built-in voltage capabilities
- Reliable electrical safety tester
Associated Research 7850 HYPOTULTRA Dielectric Analyzer
- AC Hipot 0-5000VAC Leakage Current Limits = 0.000-30.00mA Output Frequency = 50/60Hz
- 0-5000VAC
- Leakage Current Limits = 0.000-30.00mA
Fluke ESA620 Electrical Safety Analyzer
- Superior compliance with multiple standards: IEC60601:2005, EN62353, VDE 751, ANSI/AAMI ES1:1993, NFPA-99, AN/NZS 3551, IEC61010
- Three test loads
- Expanded leakage ranges through 10,000 μA
Associated Research 510L LineChek Line Leakage Tester
QuadTech Sentry 50 Plus 30 Amp Ground Bond Tester
- Programmable Output Current from 3A to 30A AC
- Programmable Source Voltage from 1.0 to 8.0V rms
- Resistance Measurements from 0.1mW to 510mW
Vitrek V79 4 Wire 30A Ground Bond Tester
- Easy to Use 4.3" High Resolution Color Touch Display - Intuitive Graphical User Interface Large High Reliability START and STOP switches Large easy to see PASS/FAIL Indicators
- 4.3" High Resolution Color Touch Display - Intuitive Graphical User Interface
- Large High Reliability START and STOP switches
Fluke Biomedical Ansur Test Automation Software
- Allows creating and managing custom test protocols electronically to eliminate dependence on service manuals
- Guides users through stepwise testing process to ensure standardized testing and to minimize training
- Generates test report (PDF or MTR) per requirements with needed level of data to ensure compliance
Chroma 19032 Sentinel I Electrical Safety Analyzer
- Floating output, compliance with EN50191
- AC/DC/IR/GB/LC five instruments in one
- Function test up to 20A
Vitrek V63 AC/DC/IR Hipot Electrical Safety Analyzer
Chroma 19052 AC/DC/IR Hipot Tester
- AC/DC/IR 3 in 1 hipot tester
- AC 5kV and DC 6kV output
- 1kV insulation resistance test
Associated Research 8106 Electrical Safety Compliance Analyzer
- Ethernet Communication Card
- USB/RS-232, & GPIB Interfaces
- Data Storage Card
Quadtech Guardian 6100 Plus Safety Analyzer
- Twin Port - Simultaneous Hipot & GB
- Built-in 20A Hipot/Line Leakage Scanner
- Output Voltage to 5 kV AC and 6kV DC
Vitrek V73 AC/DC Hipot, Insulation Resistance Tester
- Easy to Use 4.3" High Resolution Color Touch Display - Intuitive Graphical User Interface Large High Reliability START and STOP switches Large easy to see PASS/FAIL
- 4.3" High Resolution Color Touch Display - Intuitive Graphical User Interface
- Large High Reliability START and STOP switches
QuadTech Sentry 50 High Current Ground Bond Tester
- Adjustable Output Current from 1A to 30A AC
- Adjustable High and Low Resistance Limits
- Adjustable No-Load Voltage Limit
Chroma 19057 Hipot Analyzer
- 10 kV AC & 20 kV DC withstand voltage test
- 0.1 MΩ - 50 GΩ insulation impedance test
- BDV (BreakDown Voltage test)
Associated Research 3665 Dielectric Withstand Tester
- Tamper proof front panel controls to limit user access
- User selectable output voltage & frequency
- Complete user configurable system capability
Associated Research 7564SA Quadchek II AC/DC Hipot
- GPIB (IEEE-488), RS-232 or Printer Interfaces
- Available in 500 VA Output Versions
- Optional Built-In & External Scanner Capabilities
Associated Research OMNIA II 8206 Electrical Safety Compliance Analyzer
Kikusui TOS5300 Series AC/DC Hipot Testers
- Reduces tact time; capable of setting the test time from 0.1s
- High-efficiency PWM switching amplifier provides a stable output of high voltage without being affected by AC line variation
- Rise/fall time control function of the applied voltage
Chroma 19055/19055-C Series Hipot Analyzers 500 VA
- 500 VA output rating
- Floating output complies with EN50191
- Corona Discharge Detection (CDD, option)