Associated Research OMNIA II 8207 Electrical Safety Compliance Analyzer
- Built-in AC Power Source
- 4-Wire Measurement
- Arc Detection
Vitrek 955i Ultra-High Performance Hipot Tester
- High power output
- Wide range of built-in voltage capabilities
- Reliable electrical safety tester
Chroma 19036 Wound Component EST Analyzer
- 5 in 1 (10 channels) composite analyzer (ACWV/DCWV/IR/Impulse/DCR)
- Hi-pot test 5kVac / 6kVdc HSCC (High Speed Contact Check) 500 VA output
- 5kVac / 6kVdc
Associated Research 7850 HYPOTULTRA Dielectric Analyzer
- AC Hipot 0-5000VAC Leakage Current Limits = 0.000-30.00mA Output Frequency = 50/60Hz
- 0-5000VAC
- Leakage Current Limits = 0.000-30.00mA
Associated Research 8104 Hipot/Ground Tester
- Dielectric Withstand Test Mode Output Rating: 5 kV @ 40mA AC and 20mA DC Voltage Setting Range: 0-5000 V AC; 0-5000 V DC Resolution: 1 V Accuracy: ± (2% of setting + 5
- Output Rating: 5 kV @ 40mA AC and 20mA DC
- Voltage Setting Range: 0-5000 V AC; 0-5000 V DC Resolution: 1 V Accuracy: ± (2% of setting + 5 volts)
Quadtech Guardian 6000 Plus Electrical Safety Analyzer
- Twin Port - Simultaneous Hipot & GB
- Programmable Output Voltage to 5KV AC and 6KV DC
- Ground Bond Testing to 30A AC (to 40A with Optional Transformer)
Vitrek V74 AC/DC Hipot, IR and Ground Bond Tester
- Easy to Use 4.3" High Resolution Color Touch Display - Intuitive Graphical User Interface Large High Reliability START and STOP switches Large easy to see PASS/FAIL Indicators
- 4.3" High Resolution Color Touch Display - Intuitive Graphical User Interface
- Large High Reliability START and STOP switches
Associated Research 510L LineChek Line Leakage Tester
Chroma 19073 AC/DC/IR Hipot Tester
- Ground fault interruption shutdown the instrument when imbalance current > 0.5mA, provide the highest protection capability
- TUV approved
- CE Certified
QuadTech Sentry 50 Plus 30 Amp Ground Bond Tester
- Programmable Output Current from 3A to 30A AC
- Programmable Source Voltage from 1.0 to 8.0V rms
- Resistance Measurements from 0.1mW to 510mW
Vitrek V79 4 Wire 30A Ground Bond Tester
- Easy to Use 4.3" High Resolution Color Touch Display - Intuitive Graphical User Interface Large High Reliability START and STOP switches Large easy to see PASS/FAIL Indicators
- 4.3" High Resolution Color Touch Display - Intuitive Graphical User Interface
- Large High Reliability START and STOP switches
Fluke Biomedical Ansur Test Automation Software
- Allows creating and managing custom test protocols electronically to eliminate dependence on service manuals
- Guides users through stepwise testing process to ensure standardized testing and to minimize training
- Generates test report (PDF or MTR) per requirements with needed level of data to ensure compliance
Quadtech Guardian 1030 Multi-Purpose AC/DC/IR Hipot Tester
Associated Research 3160 Hyamp III Ground Bond Tester
- Patented VERI-CHEK® feature prompts users through steps to validate the instrument's operation
- Graphic LCD provides intuitive menu system to simplify the entire testing process from set-up to results
- Patented CAL-ALERT® feature alerts the operator that the tester is due for re-calibration PLC Remote Control allows operators to remotely control the Ground Bond tester
Vitrek V51 AC/DC Electrical Safety Tester
- Fully automated testing at the touch of a button or via PC control
- AC hipot to 5 kV with 20 mA sourcing
- DC hipot to 6 kV with 7.5 mA sourcing
Vitrek 930i Ground Bond Tester/Ground Integrity Analyzer
- 3 to 30 Amp Test Current - meets a wide variety of regulatory test specifications
- Password Protected Test Routine Storage
- Frequency Synthesis 50-400Hz
Vitrek V71 AC/DC Hipot Tester
- Easy to Use 4.3" High Resolution Color Touch Display - Intuitive Graphical User Interface Large High Reliability START and STOP switches Large easy to see PASS/FAIL Indicators
- 4.3" High Resolution Color Touch Display - Intuitive Graphical User Interface
- Large High Reliability START and STOP switches
Associated Research 5030DT Hyamp II 31A Ground Bond Tester
Chroma 19071 AC Hipot Tester
- Ground fault interruption shutdown the instrument when imbalance current > 0.5mA, provide the highest protection capability
- TUV approved
- CE Certified
SCI 266 60 Amp AC Ground Bond Tester
- 0 - 150 mΩ for 30.1 - 60.0 A
- 0 - 200 mΩ for 15.1 - 30.0 A
- 0 - 600 mΩ for 3.0 - 15.0 A
Vitrek V60 Programmable AC-DC Hipot / Electrical Safety Tester Series
- Fully automated testing at the touch of a button or via RS232 & PLC control (GPIB optional)
- Three models to choose from - select the functions you need to get the job done
- Available Quicktest™ test automation software for your PC
Kikusui TOS6200 Earth Continuity Tester
- Making a test current constant - A test current for earth continuity testing has been made constant. Thus, the test current does not need to be reset even in the face of fluctuating resistance values
- High accuracy - The tester is equipped with an ammeter of ±(1% of reading +0.2 A), a voltmeter of ±(1% of reading +0.02 V), and an ohmmeter of ±(2% of reading +0.003 ohms) that
- Offset canceling function - The tester is provided with an offer canceling function that cancels resistance values, such as the contact resistance at alligator-clip and the resistance of measurement
Chroma 19572 Ground Bond Tester
- TUV approved
- CE certified
- High current ground continuity testing up to 45Amps
Chroma 19054 AC/DC/IR/SCAN Hipot Tester
- AC/DC/IR 3 in 1 hipot tester
- AC 5kV and DC 6kV output
- 1kV insulation resistance test
Fluke ESA620 Electrical Safety Analyzer
- Superior compliance with multiple standards: IEC60601:2005, EN62353, VDE 751, ANSI/AAMI ES1:1993, NFPA-99, AN/NZS 3551, IEC61010
- Three test loads
- Expanded leakage ranges through 10,000 μA
