Related Products
Wavecontrol WPF18 Probe | 300 kHz to 18 GHz
- Electric field measurement
- Isotropic & True RMS measurement
- High sensitivity from 0.5 V/m
Narda EF 9091 NBM E-Field Probe | 100 MHz - 90 GHz
- General public and occupational field exposure
- Broad frequency range with high dynamic range
- Isotropic (non-directional) measurement
Narda 3502/01 3-Axis Isotropic Antenna | 27 MHz - 3 GHz
- Measures electric field
- Isotropic characteristic
- Stored calibration factors, applied automatically
Narda EHP-50F E&H-Field Analyzer | 1 Hz - 400 kHz
- Conforms to EMF Directive 2013/25/EU
- Weighted Peak method for capturing complex signal shapes
- FFT spectrum analysis for E-field and H-field in one device
Narda NBM-580 Broadband Radiation Meter, 2400/801B
- Up to 8 Input Metering Station for NBM Meters and/or NS3 Monitors
- Allows Central Control Of Multiple Field Sensors
- Built-in, Low and High Power Alarm Relays
Narda EF 0692 E-Field Probe, 2402/20B | 600 MHz - 6 GHz
- Flat frequency response with suppression of fields below 600 MHz
- Diode sensors
- Isotropic characteristic
Wavecontrol WP50 Probe | 10 Hz - 3 kHz
- Electric & Magnetic field measurament
- Isotropic & True RMS measurement
- Probe weighted dependant on the selected limit
Narda EF 5092 NBM E-Field-Probe, 2402/11B | 300 MHz - 50 GHz
- Flat frequency response
- Thermocouple sensors
- True RMS measurement, even with pulsed signals
Wavecontrol WPH-DC Probe | DC - 40 kHz
- Magnetic field measurement
- Isotropic & True RMS measurement
- Static and time-variable fields
Wavecontrol WP-WiFi Field Probe | 2.45 GHz
- Specific 2.45 frequency probe
- Isotropic & True RMS measurement
- Best sensitivity starting at 0.04 V/m
Wavecontrol WPF40 Field Probe, 20 MHz – 40 GHz
- High dynamic range of 60 dB
- Isotropic and RMS measurement
- Excellent attenuation at 50/60 Hz
Narda NIM-513 Probe, 2400/513 | 10 MHz to 42 MHz
- Isotropic probe
- Rapid measurement
- Reliable results
Wavecontrol WPF3 Probe | 100 kHz – 3 GHz
- Electric field measurement
- Isotropic & True RMS measurement
- High sensitivity from 0.2 V/m
Narda FieldMan Electromagnetic Field Meter | 0 Hz - 90 GHz
- Non-directional measurement using isotropic probes for applications in the frequency range 0 Hz (DC) to 90 GHz
- Wide measurement range from 0 Hz (DC) to 90 GHz
- Digital probe interface: no calibration of the measuring device is required, only the probe is calibrated
Narda NIM-511A Industrial Field Meter | 10 MHz - 100 MHz
- Complete measurement system with dual electric and magnetic field probe for frequencies up to 100 MHz
- True RMS measurements of high field strength
- Extremely high overload limit of 50 W/cm2
Wavecontrol SMP3 Dual Electromagnetic Field Meter
- 3-in-1 instrument: static field measurement, spectrum analysis, & broadband field meter
- FFT-based time domain spectrum analysis from 1 Hz to 10 MHz
- Broadband measurement of 0 Hz to 60 GHz
Wavecontrol WPH60 Field Probe
- Magnetic field measurement
- Isotropic & True RMS measurement
- High sensitivity from 0.018 A/m
Narda EF 6092 NBM E-Field Probe, 2402/17B | 100 MHz - 60 GHz
- General public and occupational field exposure
- Broad frequency range with high dynamic range
- Isotropic (non-directional) measurement
Narda NBM-550 Broadband Field Meter, 2400/101B | 0 - 90 GHz
- Non-directional measurement using isotropic probes for applications in the frequency range 0 to 90 GHz
- Intelligent probe interface detects probe parameters
- Fully automatic zero point adjustment
Narda EHP-200AC Electric & Magnetic Field Analyzer | 3 kHz - 30 MHz
- Powerful receiver for selective and wideband measurements in all 3 spatial directions
- Isotropic measurements in the 3 kHz to 30 MHz range
- Built-in frequency spectrum analysis
Narda EF 0691 NBM E-Field Probe, 2402/14B | 100 kHz - 6 GHz
- Field exposure from broadcasting, telecoms and industrial equipment
- Measurements on base stations
- (EN 50492 and IEC 62232)
Narda EF 1891 NBM E-Field Probe, 2402/02B | 3 MHz - 18 GHz
- Flat frequency response
- Diode sensors
- Isotropic characteristic
Narda 5G FR2 Antenna for SRM 3006 - Directional (3591/01) | 24.25 GHz - 29.5 GHz
- Extends SRM-3006 to cover 24.25 GHz to 29.5 GHz
- Calibrated antennas for reliable measurements
- Measurements are displayed in field strength or in percent of limit values, e.g. ICNIRP, FCC...
Narda 3501/03 3-Axis E-Field Antenna for SRM-3006 | 27 MHz - 3 GHz
- Measures electric field
- Isotropic characteristic
- Stored calibration factors, applied automatically
Narda Magnetometer HP-01 | 0 Hz - 1000 Hz
- Field exposure evaluation according to current standards and regulations such as Directive 2013/35/EU for workplaces
- Frequency-selective and wideband measurement of magnetic fields from 0 Hz to 1000 Hz
- Non-directional (isotropic) measurement with orthogonally arranged Hall sensors