Rohde & Schwarz ZNB8 Vector Network Analyzer
- Wide dynamic range of up to 140 dB
- Short sweep times of 4 ms for 401 points
- High temperature stability of typ. 0.01 dB/°C
Keysight N5230C PNA-L Microwave Network Analyzer
- 300 kHz – 20 GHz
- Up to 122 dB (10 MHz – 6 GHz)
- 2 or 4 ports
Keysight 4294A Precision Impedance Analyzer
- Accurate measurement over wide impedance range and wide frequency range
- Basic impedance accuracy: +/- 0.08 %
- 40 Hz to 110 MHz, 3 m ohms 500M ohms
Keysight N5225B PNA Microwave Network Analyzer
- Frequency Range | 900 Hz-50 GHz
- Dynamic Range | 127 dB
- Harmonics | -60 dBc
Keysight 8722ES Vector Network Analyzer
- 50 MHz – 40 GHz
- Up to 110 dB
- 2 Ports
Keysight 4396B RF Network/Spectrum/Impedance Analyzer
- Full-vector network and spectrum measurement and analysis
- Wide dynamic range network measurement with fast sweep speeds
- +/-0.05 dB/ +/-0.3deg C dynamic magnitude/phase accuracy
Keysight E5071C ENA Vector Network Analyzer
- 9 kHz – 8.5 GHz
- Up to 123 dB
- 2 or 4 ports
Tektronix TTR506 Vector Network Analyzer
- Frequency range: 100 kHz – 6 GHz
- Dynamic range: Up to 122 dB
- 2 ports
Doble M5500 Sweep Frequency Response Analyzer
- 1045 points (Default)
- Up to 5000 points (Extended Range)
- Lightweight and rugged portable test instrument
Keysight N9951A FieldFox Handheld Microwave Analyzer
- Frequency Range: 300 kHz – 44 GHz
- Dynamic Range: Up to 110 dB
- 2 Ports
Keysight FieldFox N9923A Network Analyzer (Agilent N9923A)
- Built-in QuickCal technology enables calibration without a cal kit
- Best measurement stability over time and temperature
- Industry´s only handheld network analyzer with MIL PRF 28800F Class 2 compliance with no exceptions
Megger FRAX 101 Sweep Frequency Response Analyzer
- Smallest and most rugged FRA instrument in the industry
- Highest possible repeatability by using reliable cable practice and high-performance instrumentation
- Fulfills all international standards for SFRA measurements
Keysight 4193A Vector Impedance Meter, 400 kHz - 110 MHz
- Test components in-circuit and out-of-circuit
- Measure impedance magnitude (10 mΩ to 120 kΩ) and phase (-180.0 to +180.0)
- Fixtures include low-grounded probe, spring clip fixture, and binding post fixture
Anritsu MS2026A Vector Network Analyzer
- Frequency Range: 2 to 6000 MHz
- Frequency Accuracy: 25 ppm
- Frequency Resolution: 10 kHz
Keysight 85093C RF Electronic Calibration (ECal) Module | 3.5mm
- 300 kHz to 9 GHz frequency range
- Fast full two-port calibration with a single connection
- Simple non-insertable device calibration
Hioki IM3570 Impedance Analyzer
- LCR measurement, DCR measurement, sweep measurement, continuous measurement and high-speed testing achieved with one instrument
- High-speed testing, achieving maximum speeds of 1.5ms (1 kHz) and 0.5ms (100kHz) in LCR mode
- High-accuracy measurements, basic accuracy of Z parameter: ± 0.08%
Keysight 4191A RF Impedance Analyzer
- 1 - 1000 MHz variable test frequency with sweep capability
- Direct reading of |Z| - Θ, |Y| - Θ, |F| - Θ; L, C-R, G, D, Q, R-X, G-B, Px-Py
- High resolution - 4½ digit max
Keysight N9928A FieldFox Handheld Microwave Vector Network Analyzer, 26.5 GHz
- Configure as a full, two-port VNA, time-domain reflectometer, vector voltmeter, cable and antenna analyzer, and more
- Measure all four S-parameters simultaneously with a single connection and up to 95 dB of dynamic range
- Perform accurate testing with QuickCal, full two-port unknown thru Cal, and Thru, Reflect, Line (TRL) calibration in the field
Keysight N5227A PNA Network Analyzer 10 MHz - 67 GHz
- 10 MHz to 67 GHz
- 2-ports with single source or 4-ports with two built-in sources
- 128 dB system and 133 dB receiver dynamic range, 32,001 points, 200 channels, 15 MHz IF bandwidth
Keysight N1501A Dielectric Probe Kit
- Measures complex permittivity
- Designed to work with Keysight N1500A materials measurement suite, with Option 004 coaxial probe method
- Best for measuring liquids and conformable solids
Keysight PNA Network Analyzer Series
- PNA Network analyzer software tools for investigating, characterizing & troubleshooting designs
- Advanced Design System (ADS): complete, integrated set of fast and accurate circuit & system simulators
- Configurable test set
Keysight N5232B PNA Microwave Network Analyzer 10 MHz to 20 GHz
- PNA Network analyzer software tools for investigating, characterizing & troubleshooting designs
- Advanced Design System (ADS): complete, integrated set of fast and accurate circuit & system simulators
- Configurable test set
Keysight E8357A PNA Vector Network Analyzer 300 kHz - 6 GHz
Keysight N5242B PNA-X Microwave Network Analyzer
- Frequency Range: 900 Hz/10 MHz - 26.5 GHz
- Maximum Output Power (at 20 GHz): +15 dBm
- Harmonics: -51 dBc typical; -60 dBc typical
_jpg_200_24.jpg)
Keysight E8364C PNA Network Analyzer, 10 MHz to 50 GHz
- Test set and power configuration options
- <26 usec/point measurement speed, 32 channels, 20,001 points
- TRM/LRM calibration for the most accurate on-wafer, in-fixture, waveguide and antenna measurements