Keysight E8357A PNA Vector Network Analyzer 300 kHz - 6 GHz

Discontinued

View Alternatives

The E8357A Vector Network Analyzer 300 kHz - 6 GHz is a member of the PNA Series network analyzer platform. The PNA-L Series offers the key features of the RF PNA and is code-compatible with the RF PNA. The PNA-L Series covers the frequency range of 300 kHz to 50 GHz, and is available in 2 and 4 port models. The E8357A provides the combination of speed and precision for the demanding needs of today's component test requirements. The PNA Series meets this testing challenge by providing the right combination of fast sweep speeds, wide dynamic range, low trace noise and flexible connectivity. The E8357A provides TRL/LRM calibration (four-receiver enabled) for in-fixture and on-wafer devices, standard bias-tees for active devices and standard direct receiver access for extended dynamic range.

Product Info Related Products

Time-Domain Option 010:

With the time-domain option, data from transmission or reflection measurements in the frequency domain are converted to the time domain using a Fourier transformation technique and presented on the display. The time-domain response shows the measured parameter value versus time. Markers may also be displayed in electrical length (or physical length if the relative propagation velocity is entered).

SKU: AGIL-E8357A-PKG01

Rohde & Schwarz ZNB8 Vector Network Analyzer

Wide dynamic range of up to 140 dB
Short sweep times of 4 ms for 401 points
High temperature stability of typ. 0.01 dB/°C

Keysight N5225B PNA Microwave Network Analyzer

Frequency Range | 900 Hz-50 GHz
Dynamic Range | 127 dB
Harmonics | -60 dBc

Keysight 8722ES Vector Network Analyzer

50 MHz – 40 GHz
Up to 110 dB
2 Ports

Keysight E5071C ENA Vector Network Analyzer

9 kHz – 8.5 GHz
Up to 123 dB
2 or 4 ports

Keysight N9951A FieldFox Handheld Microwave Analyzer

Frequency Range: 300 kHz – 44 GHz
Dynamic Range: Up to 110 dB
2 Ports

Keysight FieldFox N9923A Network Analyzer (Agilent N9923A)

Built-in QuickCal technology enables calibration without a cal kit
Best measurement stability over time and temperature
Industry´s only handheld network analyzer with MIL PRF 28800F Class 2 compliance with no exceptions

Tektronix TTR506 Vector Network Analyzer

Frequency range: 100 kHz – 6 GHz
Dynamic range: Up to 122 dB
2 ports

OMICRON Bode 100 Vector Network Analyzer 1 Hz - 40 MHz

Swept S-parameters in the 50 system
Reflection coefficient and return loss
Insertion loss of filters

Keysight 85093C RF Electronic Calibration (ECal) Module | 3.5mm

300 kHz to 9 GHz frequency range
Fast full two-port calibration with a single connection
Simple non-insertable device calibration

Rohde & Schwarz ZVA8 Vector Network Analyzer

Linear and nonlinear amplifier and mixer measurements
Noise figure measurements
Pulse profile measurements with 12.5 ns resolution

Anritsu MS2024B VNA Master Vector Network Analyzer

Broadband coverage of 500 kHz to 4 GHz
1-path, 2-port vector network analyzer
Intuitive graphical user-interface (GUI) with convenient touchscreen

Keysight E5061B ENA Vector Network Analyzer

Cables
Amplifiers
Resonators

Keysight E5071B ENA RF Network Analyzer | 300 kHz to 8.5 GHz

Fast multiport measurements: 9.6 µs/point
High accuracy 125dB dynamic range1 and 0.001 dB rms trace
Integrated 2, 3, or 4 test ports

Keysight N5227B PNA Microwave Network Analyzer 10 MHz to 67 GHz

PNA Network analyzer software tools for investigating, characterizing & troubleshooting designs
Advanced Design System (ADS): complete, integrated set of fast and accurate circuit & system simulators
Configurable test set

Keysight N5234B PNA Microwave Network Analyzer 10 MHz to 43.5 GHz

PNA Network analyzer software tools for investigating, characterizing & troubleshooting designs
Advanced Design System (ADS): complete, integrated set of fast and accurate circuit & system simulators
Configurable test set

Keysight E8361C PNA Microwave Network Analyzer

10 MHz to 67 GHz frequency range
94 dB dynamic range and <0.006 dB trace noise (specified to 67 GHz, with operation to 70 GHz)
<26 usec/point measurement speed, 32 channels, 20,001 points

Keysight N9928A FieldFox Handheld Microwave Vector Network Analyzer, 26.5 GHz

Configure as a full, two-port VNA, time-domain reflectometer, vector voltmeter, cable and antenna analyzer, and more
Measure all four S-parameters simultaneously with a single connection and up to 95 dB of dynamic range
Perform accurate testing with QuickCal, full two-port unknown thru Cal, and Thru, Reflect, Line (TRL) calibration in the field

Keysight N5227A PNA Network Analyzer 10 MHz - 67 GHz

10 MHz to 67 GHz
2-ports with single source or 4-ports with two built-in sources
128 dB system and 133 dB receiver dynamic range, 32,001 points, 200 channels, 15 MHz IF bandwidth

Keysight PNA Network Analyzer Series

PNA Network analyzer software tools for investigating, characterizing & troubleshooting designs
Advanced Design System (ADS): complete, integrated set of fast and accurate circuit & system simulators
Configurable test set

Keysight N5232B PNA Microwave Network Analyzer 10 MHz to 20 GHz

PNA Network analyzer software tools for investigating, characterizing & troubleshooting designs
Advanced Design System (ADS): complete, integrated set of fast and accurate circuit & system simulators
Configurable test set

Keysight N5242B PNA-X Microwave Network Analyzer

Frequency Range: 900 Hz/10 MHz - 26.5 GHz
Maximum Output Power (at 20 GHz): +15 dBm
Harmonics: -51 dBc typical; -60 dBc typical

Keysight E8364C PNA Network Analyzer, 10 MHz to 50 GHz

Test set and power configuration options
<26 usec/point measurement speed, 32 channels, 20,001 points
TRM/LRM calibration for the most accurate on-wafer, in-fixture, waveguide and antenna measurements

Keysight FieldFox N9917A Handheld Microwave Analyzer

18 GHz max frequency
Carry the world’s most integrated handheld analyzer: standard model includes cable and antenna analyzer
Expand capabilities with optional VNA, spectrum analyzer, built-in power meter, vector voltmeter, and more

Keysight E5080A ENA Vector Network Analyzer

9 kHz to 4.5/6.5/9 GHz, 2- or 4- port, 50 ohm
Wide dynamic range 152 dB (typical)
Fast measurement speed 3 ms (401 points)

Anritsu ShockLine MS46122B | 1 MHz – 43.5 GHz

Guaranteed performance to 43.5 GHz with Extended K™ ports
PC control takes advantage of external computer processing power and functionality
Compact 1U high package for efficient use of bench and rack space