Related Products

Rohde & Schwarz ZNB8 Vector Network Analyzer
- Wide dynamic range of up to 140 dB
- Short sweep times of 4 ms for 401 points
- High temperature stability of typ. 0.01 dB/°C


Keysight N5230C PNA-L Microwave Network Analyzer
- 300 kHz – 20 GHz
- Up to 122 dB (10 MHz – 6 GHz)
- 2 or 4 ports

Keysight 4294A Precision Impedance Analyzer
- Accurate measurement over wide impedance range and wide frequency range
- Basic impedance accuracy: +/- 0.08 %
- 40 Hz to 110 MHz, 3 m ohms 500M ohms

Keysight N5225B PNA Microwave Network Analyzer
- Frequency Range | 900 Hz-50 GHz
- Dynamic Range | 127 dB
- Harmonics | -60 dBc

Keysight 8722ES Vector Network Analyzer
- 50 MHz – 40 GHz
- Up to 110 dB
- 2 Ports

Keysight 4396B RF Network/Spectrum/Impedance Analyzer
- Full-vector network and spectrum measurement and analysis
- Wide dynamic range network measurement with fast sweep speeds
- +/-0.05 dB/ +/-0.3deg C dynamic magnitude/phase accuracy

Keysight E5071C ENA Vector Network Analyzer
- 9 kHz – 8.5 GHz
- Up to 123 dB
- 2 or 4 ports

Tektronix TTR506 Vector Network Analyzer
- Frequency range: 100 kHz – 6 GHz
- Dynamic range: Up to 122 dB
- 2 ports


Doble M5500 Sweep Frequency Response Analyzer
- 1045 points (Default)
- Up to 5000 points (Extended Range)
- Lightweight and rugged portable test instrument


Keysight N9951A FieldFox Handheld Microwave Analyzer
- Frequency Range: 300 kHz – 44 GHz
- Dynamic Range: Up to 110 dB
- 2 Ports

Keysight FieldFox N9923A Network Analyzer (Agilent N9923A)
- Built-in QuickCal technology enables calibration without a cal kit
- Best measurement stability over time and temperature
- Industry´s only handheld network analyzer with MIL PRF 28800F Class 2 compliance with no exceptions

Megger FRAX 101 Sweep Frequency Response Analyzer
- Smallest and most rugged FRA instrument in the industry
- Highest possible repeatability by using reliable cable practice and high-performance instrumentation
- Fulfills all international standards for SFRA measurements

Keysight 4193A Vector Impedance Meter, 400 kHz - 110 MHz
- Test components in-circuit and out-of-circuit
- Measure impedance magnitude (10 mΩ to 120 kΩ) and phase (-180.0 to +180.0)
- Fixtures include low-grounded probe, spring clip fixture, and binding post fixture

Anritsu MS2026A Vector Network Analyzer
- Frequency Range: 2 to 6000 MHz
- Frequency Accuracy: 25 ppm
- Frequency Resolution: 10 kHz


Keysight 85093C RF Electronic Calibration (ECal) Module | 3.5mm
- 300 kHz to 9 GHz frequency range
- Fast full two-port calibration with a single connection
- Simple non-insertable device calibration

Anritsu MS2024B VNA Master Vector Network Analyzer
- Broadband coverage of 500 kHz to 4 GHz
- 1-path, 2-port vector network analyzer
- Intuitive graphical user-interface (GUI) with convenient touchscreen


Hioki IM7587-01 Impedance Analyzer
- Power: -40.0 dBm to +1.0 dBm
- Voltage: 4 mV to 502 mVrms
- Current: 0.09 mA to 10.04 mArms


Tettex Instruments FRA 5310 Transformer Frequency Response Analyzer
- High measurement reliability and reproducibility due to active probes design from 10Hz - 10MHz.
- High signal-to-noise ratio due to output voltage 1V peak to peak (24V)
- Ease of use due to automated test software, large color touch screen interface and remote start button.


Keysight E5061B ENA Vector Network Analyzer
- Cables
- Amplifiers
- Resonators

Keysight E5071B ENA RF Network Analyzer | 300 kHz to 8.5 GHz
- Fast multiport measurements: 9.6 µs/point
- High accuracy 125dB dynamic range1 and 0.001 dB rms trace
- Integrated 2, 3, or 4 test ports

Keysight N5227B PNA Microwave Network Analyzer 10 MHz to 67 GHz
- PNA Network analyzer software tools for investigating, characterizing & troubleshooting designs
- Advanced Design System (ADS): complete, integrated set of fast and accurate circuit & system simulators
- Configurable test set

Keysight N5234B PNA Microwave Network Analyzer 10 MHz to 43.5 GHz
- PNA Network analyzer software tools for investigating, characterizing & troubleshooting designs
- Advanced Design System (ADS): complete, integrated set of fast and accurate circuit & system simulators
- Configurable test set

Keysight E8361C PNA Microwave Network Analyzer
- 10 MHz to 67 GHz frequency range
- 94 dB dynamic range and <0.006 dB trace noise (specified to 67 GHz, with operation to 70 GHz)
- <26 usec/point measurement speed, 32 channels, 20,001 points

Hioki IM3570 Impedance Analyzer
- LCR measurement, DCR measurement, sweep measurement, continuous measurement and high-speed testing achieved with one instrument
- High-speed testing, achieving maximum speeds of 1.5ms (1 kHz) and 0.5ms (100kHz) in LCR mode
- High-accuracy measurements, basic accuracy of Z parameter: ± 0.08%


Keysight 4191A RF Impedance Analyzer
- 1 - 1000 MHz variable test frequency with sweep capability
- Direct reading of |Z| - Θ, |Y| - Θ, |F| - Θ; L, C-R, G, D, Q, R-X, G-B, Px-Py
- High resolution - 4½ digit max