AE Techron DSR 100-200 | Pulse 2B and 4
- Frequency Range: DC - 250 kHz
- Output Current: 0A - 200A (Cont.)
- DO 160G, ISO 7637-2, MIL STD 461F
AE Techron 7234 Audio Power Amplifier
- DC - 1MHz
- 900W RMS
- 20V/V (Voltage Mode) or 6V/V (DIP Switch)
Tektronix TCP303
- Easy Current Measurements
- Probe Connects Directly to TDS Scope through TEKPROBE™ BNC Interface
- Split Core Construction for Easy Circuit Connection
Schloder CDG7000-75-10
- Amp Range: 10kHz - 250/400MHz (25/75W)
- Sig Gen Range: 9kHz - 1.2GHz
- 3 Ports
Tektronix TCPA300 Current Probe Amplifier
- DC to 100 MHz maximum bandwidth
- Automatic control and onscreen scaling and units
- AC/DC input coupling
AE Techron 7228 Linear Power Amplifier
- Frequency Range: DC – 1MHz
- AC Power: 1000W RMS
- Gain: 20V
EMC Partner IMU C-SHORT Common Mode Short Duration Testing Extension
- IEC 61000-4-16 Standard
- Testing capabilities that find conducted immunity
- Common mode extension
_17.png)
Prâna IP-DR250 Bulk Current Injection Probe
- Frequency Range: 10kHz - 400MHz
- Power: 500W (CW), Loss: -33... -6dB
- Inner Diameter: 1.72in (43.8mm)
AE Techron 3110 Standards Waveform Generator
- DC-20kHz (DAC), DC-300kHz (Sine)
- 120VAC, 1.0VA service, 1Ø
- IEC 6100-4-16, ISO 7637, ISO 16750-2
PMM EMCL-35 10 kHz - 1 GHz EM Injection Clamp | 35mm Aperture
- Frequency Range: 10kHz - 1GHz
- Power: 100W, Typ. Coupling Factor: -3dB
- Inner Diameter: 1.38in (35mm)
Teseq NSG 4070B Conducted Immunity Test System
- Amp Range: 150kHz - 230MHz (80W)
- Sig Gen Range: 9kHz - 1GHz
- 3 Ports
Teseq Mil-Std-461 CS114 10kHz - 400 MHz Conducted Susceptibility Test System
- Signal generation: NSG 4070-0
- Modulator: included in NSG 4070-0
- Power meter: 3x included in NSG 4070-0
Teseq NSG 4070C-80 Test System for Conducted and Radiated Immunity
- IEC & Automotive standards
- 80W, 150kHz - 230MHz amplifier
- 4kHz - 1 GHz signal generator / power meter
AE Techron 8302 RF Amplifier
- DC - 50kHz
- 2kW
- ISO 7637-2, ISO 16750-2
Tektronix TCP0020 Current Probe
- Easy-to-use design
- DC to >50 MHz bandwidth
- Core jaw diameter of 5 mm (0.2 in)
Solar 9335-2 Multiple Impedance Coupling Device
- Frequency Range: 10kHz - 10MHz
- Impedance: 50Ω
- Inner Diameter: 1.5in (38mm)
PMM Cond-IS/10 Conducted Immunity System
- Generator 3010, 9 kHz – 1 GHz, -107 to +10 dBm
- Amplifier 6000N, 9 kHz – 230 MHz, 10/15 W
- ATT-25W, 6 dB Attenuator, 25 W max
Fischer Custom Communications FCC-BCICF-2
- Bulk current injection probe fixture
- Matched with the F-140 bulk current injection probe
- Easy-to-use design
Com-Power CLCE-1032 RF Current Probe | 9 kHz – 1000 MHz
- Frequency range of 9 kHz to 1000 MHz
- Suitable for CISPR, MIL-STD-461, and DO-160
- Individual calibration
LeCroy CP150 Current Probe
- Current probe
- Compact design
- Broad bandwidth
AE Techron T2000 Low-Frequency Conducted Susceptibility Transformer
- Frequency response: 10 Hz to 250 kHz.
- Turns ratio: 2:1 step down
- Audio power: 200W
Fischer Custom Communications F-120-9A
- Frequency: 10kHz - 230MHz
- Power: 100W, Loss: <8dB
- Inner Diameter: 1.57in (40mm)
AE Techron T3700 Electric-Field Susceptibility Transformer
- Up to 3,700 volts, 11,000 V/m.
- Meets or exceeds voltage requirements of DO 160 Section 19 and Boeing D6-16050-5 Section 7.2.
- Robust design; withstand tested to 5,000VRMS.
Com-Power CLA-150 Absorbing Clamp 30 MHz - 1 GHz
- Frequency Range: 30 - 1000 MHz
- Impedance: 50 Ohm
- Connector Type: BNC (f)
EMC Partner CN16T8 DC Coupling-Decoupling Network
- DC Line CDN for 8 Lines (4 pairs)
- EUT / AE connector (RJ45)
- IEC 61000-4-16 standard