Teseq NSG 4070B

150 kHz - 230 MHz, 80 W Amp | Conducted Immunity Test System

The Teseq NSG 4070B is a multifunctional device for EMC immunity tests, including LF/RF immunity and transient, with a frequency range of 9kHz - 1GHz. Its modular setup uses internal or external amplifiers to enable a large variety of applications, and it is flexible to be used either with its firmware or remote controlled via a PC. This unit can help perform some of the following standards: IEC 61000-4-6, IEC 61000-4-16, IEC 61000-4-19, MIL-STD-461 CS114, and RTCA/DO-160 Section 20.

Additionally, ATEC rents a plethora of power line CDNs, data line CDNs, EM clamps, and current monitor probes that work with a conducted immunity system rentals. Scroll down below for a list of our add-ons.

Product Info Available Add-Ons Related Products

Plugin Module	Description
97-253290	NSG 4070-TC, Traceable calibration (ISO17025), order only with the device
98-253290	NSG 4070-DAkkS, DAkkS calibration (ISO17025), order only with the device
253840	NSG 4070 Rack, Rack mounting kit for NSG 4070 (red handles)
253850	SW 4070, Option for NSG 4070: RF-Switch network 2x SPDT
253900	MD 4070, Monitoring device (current sensing probe) active/passive with PSU 6001 and LE 242 in storage case
252052	PCJ 9201B, Calibration jig for current probes
252054	FIX MD4070, Positioning fixture for MD 4070 in PCJ 9201
253104	LE 4070, RF cable set for NSG 4070
235309	ATN 6050, Attenuator 50W cw N(f) - N(f)
235307	ATN 6075, Attenuator 75W cw N(f) - N(f), incl. cable LE 213

Generator

RF	Frequency Range: 9 kHz – 1 GHz Resolution: 1 Hz Reference Frequency: 10 MHz Aging: 25 ppm
RF Level	Level Range: -60 dBm... +10 dBm Resolution: 0.1 dB Setting Time: 10 ms
Amplitude Modulation	Modulation Depth: 0 – 100% Modulation Frequency Range: 1 Hz – 50 kHz Frequency Resolution: 1 Hz
Pulse Modulation	Rise/Fall Time (10% to 90%): < 1 µs Modulation Frequency Range: 1 Hz – 50 kHz Frequency Resolution: 1 Hz Duty Cycle: 10% – 90%
External Modulation	Delay Time: < 1 µs /180° Period: min. 20 µs Pulse Width: min. 10 µs

Power Meter

Frequency Range	9 kHz – 1 GHz
Linear Measurement Range	Channel 1: -35 dBm... +27 dBm Channel 2,3: -45 dBm... +20 dBm
Max. Input / No Damage	Channel 1-3: +28 dBm
Noise Level	>5 dB below the measurement range
Input return loss	>20 dB (below 500 MHz), >17 dB (500 MHz to 1 GHz)
Connector	BNC socket, 50 Ω
Accuracy 10 to 30°C:	<0.5 dB, typ. <0.3 dB

Power Amplifier

Nominal Output Power	35 W	40 W (Preliminary)	45 W (Preliminary)	80 W
Frequency Range	150 kHz – 230 MHz	10 kHz – 400 MHz	9 kHz – 1 GHz	150 kHz – 230 MHz
Input Impedance	50 Ω	50 Ω	50 Ω	50 Ω
Output Impedance	50 Ω	50 Ω	50 Ω	50 Ω
Input Return Loss	min. 10 dB	min. 10 dB	min. 10 dB	min. 10 dB
Output Return Loss	nominal min. 9.5 dB, 0 dB without damage	nominal min. 9.5 dB, 0 dB without damage	nominal min. 9.5 dB, 0 dB without damage	nominal min. 9.5 dB, 0 dB without damage
Gain	min. 48 dB	- 10 kHz – 20 MHz min. 50 dB - 20 MHz – 400 MHz min. 47 dB	min. 50 dB	min. 50 dB
Gain Flatness	max. +/- 3 dB	max. +/- 3 dB	max. +/- 3 dB	max. +/- 3 dB
Saturated Output Power	min. 45.4 dBm	- 10 kHz – 20 MHz min. 46 dBm - 20 MHz – 400 MHz min. 44.5 dBm	- < 400 MHz 46.5 dBm - > 400 MHz 45.4 dBm	min. 49 dBm
Linear Outpuut Power	min. 44 dBm	- 10 kHz – 20 MHz min. 45 dBm - 20 MHz – 400 MHz min. 43 dBm	- < 400 MHz 45.4 dBm - > 400 MHz 43 dBm	min. 48 dBm
Max Input Power without Damage	max. +10 dBm	max. +10 dBm	max. +10 dBm	max. +10 dBm
Harmonic Distortion at Linear Output Power	typ. < -17 dBc	typ. < -20 dBc	typ. < -20 dBc	typ. < -20 dBc

Integrated signal generator 9 kHz – 1 GHz
3 power meter inputs 9 kHz – 1 GHz
Integrated class A power amplifier module for different applications:
35 W, 150 kHz – 230 MHz;
40 W, 10 kHz – 400 MHz
45 W, 9 kHz – 1 GHz;
80 W, 150 kHz – 230 MHz
Multiple EUT monitoring options
5.7" TFT color display
Internal, menu-based control software
Basic remote control software and report generator included
Optically decoupled remote control