Tektronix TCPA300 Current Probe Amplifier
- DC to 100 MHz maximum bandwidth
- Automatic control and onscreen scaling and units
- AC/DC input coupling
Tektronix TCP303
- Easy Current Measurements
- Probe Connects Directly to TDS Scope through TEKPROBE™ BNC Interface
- Split Core Construction for Easy Circuit Connection
Tektronix TCP0020 Current Probe
- Easy-to-use design
- DC to >50 MHz bandwidth
- Core jaw diameter of 5 mm (0.2 in)
Com-Power CLCE-1032 RF Current Probe | 9 kHz – 1000 MHz
- Frequency range of 9 kHz to 1000 MHz
- Suitable for CISPR, MIL-STD-461, and DO-160
- Individual calibration
Fischer Custom Communications F-33-2 Current Probe | 1kHz - 250MHz
- Compact probes with an external diameter of roughly 71 mm and an internal diameter of 32 mm
- Frequency spectrum from 1 kHz to 250 MHz
- BNC connector
Pearson Electronics PRD-240 Powerline Ripple Detector
- 10 Hz – 150 kHz
- 240 V AC / 270 V DC
- CS101 profile above 5 kHz
Pearson Electronics 110 Current Monitor Probe | 1Hz – 20MHz
- Current monitor probe
- Robust peak current capacity of 5 kA
- Frequency response reaching up to 20 MHz
Fischer Custom Communications F-16-1 Current Probe
Solar 9123-1 Current Monitor Probe
- 10kHz – 500MHz
- 1.0 – 5.0 Ω above 150kHz
- Type N, Female
Pearson Electronics 3525 Current Monitor | 5 Hz – 15 MHz
- 0.1 V/A +1/-0% sensitivity
- 50 Ω output resistance
- Maximum peak current of 5000 A
AH Systems BCP-512 Broadband Current Probe | 1MHz - 1000MHz
- Individually Calibrated (Transfer Impedance calibration included)
- High Current Capability
- Split Type Clamp-on Design
AH Systems BCP-511 Broadband Current Probe | 20 kHz – 100 MHz
- Measure conducted emissions from 20 kHz to 100 MHz
- Capable of measuring pulse currents up to 100 amperes with a duty cycle of 0.001
- Individually calibrated (transfer impedance calibration included)
Com-Power CLCE-438 RF Current Probe | 9 kHz – 400 MHz
- Frequency range of 9 kHz to 400 MHz
- Suitable for CISPR, MIL-STD-461, and DO-160
- Individual calibration
Solar 7541-1 Spike Receptor Probe
- Spike receptor probe (calibrated for use with oscilloscope)
- The receptor probe is assembled with a hinged construction
- Includes a calibrating resistor mounted in the housing
AH Systems BCP-510 Broadband Current Probe | 20Hz - 1MHz
- Measures currents on 50 Hz, 60 Hz and 400 Hz powerlines
- Individually Calibrated (Transfer Impedance calibration included)
- Split Type Clamp-on Design
AH Systems BCP-520 Broadband Current | 10kHz - 500MHz
- Individually Calibrated (Transfer Impedance calibration included)
- High current conducted emissions measurements without saturation
- High Current Capability
PMM CLCE-400 Current Monitor Probe | 10 kHz – 400 MHz
- Frequency Range: 10 kHz to 400 MHz
- Suitable for CISPR, Mil-STD-461 & DO-160
AH Systems BCP 600 Series | 20 Hz – 500 MHz
- A variety of current probe configurations
- Frequencies ranging from 20 Hz to 500 MHz
- Lightweight designs
Pearson Electronics 101 Current Monitor Probe | 0.25Hz - 4MHz
AH Systems BCP-526 Broadband Current Probe | 100kHz - 1GHz
- High current conducted emissions measurements without saturation.
- Individually Calibrated (Transfer Impedance calibration included)
- High Current Capability
Fischer Custom Communications F-72 Current Probe | 100Hz - 100MHz
Com-Power CLCE-332 RF Current Probe | 9 kHz – 300 MHz
- Frequency range of 9 kHz to 300 MHz
- Suitable for CISPR, MIL-STD-461, and DO-160
- Individual calibration