Frankonia MTS-800 Magnetic-Field Low-Frequency Emission and Immunity Test System
- Frequency range for emission and immunity measurements: DC – 250 kHz
- 800W precision power amplifier, signal generator and spectrum analyzer in one compact unit
- All instruments may as well be used as stand-alone devices
Com-Power CDN-AF4 Coupling/Decoupling Network (CDN)
- For Signal Lines
- Frequency Range - 150 kHz - 80 MHz
- Meets EN 61000-4-6 requirements
Teseq (Schaffner) KEMA 801A Decoupling Clamp
- Decoupling Network/ RF attenuation clamp
- As specified in IEC/EN 61000-4-6
- Very efficient coupling
PMM RAD-IS/3G-602 Radiated Immunity System
Fischer Custom Communications F-120-9A
- 7 dB attenuation between 100 kHz and 230 MHz when measured into a 50 ohms fixture
- Perform IEC 1000-4-6 testing with 20 watts or less of RF power
- Usable up to 200 watts
EM Test CDN-M2/M3N for Supply Lines
- For 2 or 3 AC/DC supply lines (switchable)
- AE: IEC 320 connector
- EUT: 4mm safety lab connectors
Teseq NSG 4070-75 Conducted & Radiated Immunity Test System
- Integrated signal generator 9kHz to 1GHz
- 4-channel power meter 9kHz to 1GHzAn advanced combination of signal generator and compact immunity test system.
- Integrated power amplifier module for different
Solar 9142-1N Bulk Current Injection Probe | 2 MHz – 450 MHz
- Bulk current injection probe
- Frequency range of 2 MHz to 450 MHz
- Maximum input power of 200 W
Pearson Electronics 110 Current Monitor Probe | 1Hz – 20MHz
- Current monitor probe
- Robust peak current capacity of 5 kA
- Frequency response reaching up to 20 MHz
AH Systems ICP-621 Injection Current Probe | 10 kHz – 100 MHz
- Broad frequency range of 10 kHz to 100 MHz
- Individually calibrated
- Split type clamp-on design
Fischer Custom Communications F-33-2 Current Probe | 1kHz - 250MHz
- Compact probes with an external diameter of roughly 71 mm and an internal diameter of 32 mm
- Frequency spectrum from 1 kHz to 250 MHz
- BNC connector
Tektronix TCPA300 Current Probe Amplifier
- DC to 100 MHz maximum bandwidth
- Automatic control and onscreen scaling and units
- AC/DC input coupling
PMM 150-50-BCL Ohm Adapter
- 3 watts power rating
- Conducted immunity system testing
- Frequency range of 10 kHz to 230 MHz
Amplifier Research CI00250A RF Conducted Immunity System
Com-Power CDN-T8E CDN for 8 Line (4 Balanced Pairs)
- Frequency range of 150 kHz to 230 MHz
- Designed for IEC / EN 61000-4-6
- Four unscreened, balanced pairs
Com-Power CDN-M525E Five Conductor Power Line 25 Amp CDN
- Product Name: Coupling Decoupling Network (CDN)
- Compliant Test Standards: IEC / EN 61000-4-6
- Application: Five conductor power cable
Fischer Custom Communications BCICF-1 Calibration Fixture
- Excellent VSWR over a broad bandwidth: <2:1 over the frequency range of 10kHz – 400 MHz when the probe is in fixture
- Accommodates a wide variety of Bulk Current Injection Probes that operate between 10 kHz – 400 MHz
ETS-Lindgren 95236-1 Bulk Current Injection Probe
Teseq CT 419-5 Current Transformer for IEC / EN 61000-4-19
- Coupling transformer designed for IEC/EN 61000-4-19
- Frequency range 2 kHz to 150 kHz
- 4 mm banana sockets
Com-Power CDN-AF2 Coupling/Decoupling Network (CDN)
- For Signal Lines
- Frequency Range - 150 kHz - 80 MHz
- Meets EN 61000-4-6 requirements
Schwarzbeck CDN-S25-SUBD
- Part of the coupling decoupling network series
- For conducted common mode immunity testing according to IEC 61000-4-6
- Frequency range of 10 kHz to 230 MHz
LeCroy CP150 Current Probe
- Current probe
- Compact design
- Broad bandwidth
AE Techron T2000 Low-Frequency Conducted Susceptibility Transformer
- Frequency response: 10 Hz to 250 kHz.
- Turns ratio: 2:1 step down
- Audio power: 200W
Fischer Custom Communications F-16-1 Current Probe | 10Hz - 70MHz
BOLAB AN-ABCD-300-C10 Artificial Network System | 1000 V, 300 A
- In accordance with LV123, ISO 21498, MBN 11123, VW 80300, and IEC 61851-23
- Liquid cooled for stabile resistance temperature and constant ohmic value
- True continues current loading without derating, ideal for in-the-loop testing during the development stage of HV components
