Related Products

Teseq PA 5840 Automotive Power Amplifier/Battery Simulator
- Large inrush current capability
- Capacitive stability mode
- High bandwidth up to 150 kHz


EM Test VDS 200N Voltage Drop Simulator
- Voltage up to 60V
- Current up to 200A (peak up to 1,000A)
- Bipolar-amplifier models available


BOLAB AN-ABCD-300-C10 Artificial Network System | 1000 V, 300 A
- In accordance with LV123, ISO 21498, MBN 11123, VW 80300, and IEC 61851-23
- Liquid cooled for stabile resistance temperature and constant ohmic value
- True continues current loading without derating, ideal for in-the-loop testing during the development stage of HV components


Teseq NSG5200 Automotive Transient Test System


EM Test UCS 200N100 Automotive Transient Generator
- Built-in EFT/Burst generator module
- Built-in Micropulse generator module (ISO 7637, JASO, SAE and NISSAN)
- Built-in coupling network 60V, up to 200A


AE Techron CIS-25 EMC Testing Kit
- Combines into a single, complete package the items needed to accurately test to important Aviation standards like DO-160 sections 18 and 19
- Included with the kit are three coupling transformers (T1000, T2000, and T3700)
- Includes the DSR 100-25 test system and the CR 600 Chattering Relay accessory


AE Techron 3110 Standards Waveform Generator
- Includes a large library of Automotive and Aviation Standards’ test routines--complete list available as Supplemental Document under Datasheet on left
- Drag and drop interface makes it easy to modify existing tests or build new waveform sequences
- Loop entire tests or test sections; repeat loops with increments of up to four variables


EM Test Autowave Arbitrary Generator
- Dual-Processor-Technology, 500kS/s sample rate
- 4-channel arbitrary generator
- 2-channel transient recorder


EM Test Automotive Transient Emission Set 100 kHz - 125 MHz
- BS 200N100 - Electronic switch, 60V DC/100A: Volt.Drop <1.2V@100A, <0.2V@25A Peak voltage max. 1,000V Reverse-polarity/short-circuit protected
- Volt.Drop <1.2V@100A, <0.2V@25A
- Peak voltage max. 1,000V


EM Test VDS 200N30 Voltage Drop Simulator | 60 V, 30 A
- Voltage up to 60 V
- Current up to 30A
- Bipolar-amplifier models available


BOLAB 100-TS Series | DC up to 1 MHz, 400 W – 18000 W
- Bandwith: DC up to 1 MHz
- Output: 400 W – 18000 W
- For LV124 / VW80000, LV148, ISO 16750, ISO 7637, DIN 40839, and GS 95024


EM Test UCS 200N Automotive Transient Generator for ISO 7637
- Built-in EFT/Burst generator module
- Built-in Micropulse generator module (ISO 7637, JASO, SAE and NISSAN)
- Built-in coupling network 60V, up to 200A


Schwarzbeck NNBL-8240 | 150 kHz - 100 MHz
- Complies with MIL-STD-461E standard
- 150 kHz – 100 MHz
- Ideal for military, RF, and space industries


Hilo-Test CAR-AWG 6000 Battery Simulator
- Batterie simulator
- Bandwidth DC-200kHz
- Signal Bandwith DC-1MHz (small signal -3dB)


Teseq PA 5740 Power Amplifier/Battery Simulator
- Capacitive stability mode
- High bandwidth up to 180 kHz
- Fast slew rate


EM Test LD 200N100 Load Dump Generator
- Built-in 100A coupler 60 V/100 A
- Built-in battery switch for 100A
- Generates Clipped Load Dump pulses


Teseq NSG 5600 Automotive Transient Generator


EM Test RCB 200N1 Transient Immunity Test Generator for FORD EMC-CS-2009.1
- Approved by Ford acc. to EMC-CS-2009.1 requirements
- Pulses CI 220: A1, A2-1, A2-2, C-1 and C-2
- Pulse CI 260: F


Bolab AN-ABCD-60 Artificial Network System | 1000 V, 60 A
- In accordance with LV123, ISO 21498, MBN 11123, VW 80300, and IEC 61851-23
- Liquid cooled for stable resistance temperature and constant ohmic value
- True continues current loading without derating, ideal for in-the-loop testing during the development stage of HV components


EM Test PFM 200N100.1 Automotive Power Fail Simulator
- Switch for Power supply (100 A) and signal/data lines (2 A)
- Pulses E10 and E13 of the LV 124/LV 148 standard
- Bidirectional current direction


BOLAB Systems BLS-130-70N-TS 4-Quadrant Voltage Amplifier
- DC up to 1 MHz (small signal -3 dB)
- Ouput: 3,000 W
- For LV124 / VW80000, LV148, ISO 16750, ISO 7637, DIN 40839, GS 95024


Teseq NSG 5500 Automotive Transient Immunity Tester for ISO 7637


Hilo-Test CAR-AWG 1200 Battery Simulator
- For electrical installation of vehicles
- Battery simulator
- Bandwidth DC-200kHz


AE Techron DSR 100-200 | Pulse 2B and 4
- 4-Quadrant – Can source and sink current.
- ±80V – DC supply for 12V to 48V systems; meets 80V surge requirements.
- 300 kHz Sine – DC ripple tests for all major standards.


LV 123 Automotive Component Testing System
