EM Test PFS 200N Series Automotive Power Fail Simulator

Rent EM Test PFS 200N Series Automotive Power Fail Simulator
Enlarge Image
EM Test PFS200N
Request Quote Print Page
Datasheet Other1

The EM Test PFS 200N Automotive Power Fail simulator is used to comply with standard requirements, mainly from vehicle manufacturers, to perform fast voltage dips ad drops (micro-interruptions). Some standards specify very fast rise and fall times below 1 microsecond an electronic switch.
 

The PFS 200N is a standalone tester providing an electronic switch to perform voltage dips and drops (micro-interruptions) with fast rise and fall times of 1 microsecond. For voltage dips two DC voltage supplies are required while for for voltage drops (micro-interruptions) only one DC voltage supply is needed. The PFS 200N has the ability to control one external DC voltage source by means of an analog DC signal.
 

The EM Test PFS 200N can also be easily integrated into a complete test set-up. Operation is possible both manually and by software via USB or GPIB. Fail inputs allow to control an ongoing test sequence based on the status of the DUT.

 
EM Test PFS200N Features
  • Standalone test generator for voltage dips and interruptions
  • Rise/fall time <1us
  • Electronic short-circuit protection
  • Rated voltage 60V DC
  • Front panel operation
  • Standard Test routines
  • USB and GPIB interfaces
EM Test PFS200N Specs
Model DUT voltage DUT current Switching time Peak current Safety
200N30 Max. 60V for channels PF1/PF2 Max. 30A for channels PF1/PF2 1us (rise/fall time) 70A for 500ms Short circuit protection
200N50 Max. 60V for channels PF1/PF2 Max. 50A for channels PF1/PF2 1us (rise/fall time) 100A for 500ms Short circuit protection
200N100 Max. 60V for channels PF1/PF2 Max. 100A for channels PF1/PF2 1us (rise/fall time) 150A for 500ms Short circuit protection
200N150 Max. 60V for channels PF1/PF2 Max. 150A for channels PF1/PF2 1us (rise/fall time) 200A for 500ms Short circuit protection
200N200 Max. 60V for channels PF1/PF2 Max. 200A for channels PF1/PF2 1us (rise/fall time) Greater than 200A Short circuit protection
 
Trigger
Automatic Automatic release of the events
Repetition rate 100ms to 999s
Dip/drop duration td 1us to 10s
Manual Manual release of a single event
CRO Trigger Trigger for oscilloscope, +15V edge
External External release of a single event
Interface
Interface USB
Parallel interface IEEE 488, addresses 1 to 30
Analog interface OVdc to 10Vdc to control an external dc source (e.g. RDS 200N)