Megger DLRO200-115 High Current DLRO
- Small and weighs less than 32 lbs (14.5kg)
- Test currents from 10 A to 200 A d.c.
- Filtered direct current output eliminates magnetic transients
Megger DLRO10HDX Dual Power 10A Micro-Ohmmeter
- Onboard memory storage for test results up to 200 records
- Download to PowerDB
- Interchangeable test lead terminations
Megger DLRO-H200 Micro-Ohmmeter
- 220 A
- Ultra capacitor discharge
- Battery supplied
AEMC 6292 High Current Micro-Ohmmeter
- Perform tests normally or with both sides of the switch gear connected to the ground
- Four languages available through user selection
- Cooling system to improve the number of sequential tests that can be performed
Megger DLRO2 Low Resistance Ohmmeter
- 1 µΩ – 2000 Ω
- Test Current Levels: 2A, 1A, 100mA, 10mA, 1mA
- Accuracy: ±1% ±2 digits
AEMC 6250 10A / DLRO
- Measure from 0.0001mΩ (0.1μΩ resolution) to 2500.0Ω
- Test current selection of 1mA, 10mA, 100mA, 1A and 10A
- RTD temperature probe to check tested sample (optional)
Megger DLRO2X Low Resistance Ohmmeter
- Output up to 2A
- 1 µΩ – 2000 Ω
- Includes Noise Rejection
Phenix MRM-100 Portable 100 Amp Digital Microhmmeter
- Microprocessor Based - Allows for user interface to easily program, read, store, and print tests
- Wide Range of Measurements - Allows user to vary test current from 10 Amps to 105 Amps and measure 1 micro-ohm to 240 milliohms
- Ability to store and print up to 300 Readings—User can print (using a 2.25 inch impact printer) or output readings via an RS-232 interface (USB adapter is optional)
Megger MOM2
- Up to 240 A
- Bluetooth ® headset for audible pass/fail testing against adjustable limits
- Battery powered
Megger DLRO10X Digital Low Resistance Ohmmeter
- Accurate results in under three seconds
- Auto current reversal cancels standing emfs
- Fuse protected to 600 V
Megger DLRO100HB
- Meets CAT IV 600 VAC / 500 VDC safety standards
- Portable, lightweight 100 A battery-powered unit
- High noise immunity for stable readings
Megger DLRO 600 Digital Microhmmeter
- Small and weighs less than 15kg
- Test currents from 10A to 600 A d.c.
- 0.1 μΩ best resolution
Megger DLRO10HD 10 Amp
- High or low output power selection for condition diagnosis
- Rechargeable battery or line power supply, continuous operation, even with dead battery
- 10 A for 60 seconds, less time waiting to cool, great for charging inductance
Vanguard Auto-Ohm 200 S3
- Measures circuit breaker contact resistance with safety ground on (with the Dual Ground option)
- Stores test records on-board or on external USB Flash drive
- 1 to 200A programmable test current
Megger 830280 Transformer Ohmmeter
- Direct digital reading
- Built-in discharge circuitry
- Two independent measuring channels
Valhalla 4300C Programmable Digital Micro-Ohmmeter
- Ideal for tackling the ultra-low resistance testing requirements
- Covers 3 voltage ranges (20 mV, 200 mV, 2 V)
- Hi-LO resistance limit comparator
Valhalla 4176 Precision Micro-Ohmmeter
- 7 ranges from 20 mΩ to 20 kΩ
- 1 µΩ resolution
- Auto-Ranging mode
AEMC 6255 10A Micro-Ohmmeter
- Measure from 1μΩ (0.1μΩ resolution) to 2500.0Ω
- Test current selection of 1mA, 10mA, 100mA, 1A and 10A
- Selectable metal types
Raytech USA Micro Jr. 2 Precision Micro Ohm Meter 10 A
- Large LCD display with backlight
- Built in panel-mount printer
- Highest precision measurement available
Vanguard CT-8000 S3 Micro Ohmmeter
- Dynamic Contact Resistance
- Voltage Monitoring Channels
- Contact Timing Input Channels