Doble F6150 Protective Relay Test Set

F6150: Doble Protective Relay Test Set
Enlarge Image
F6150: Doble Protective Relay Test Set F6150: Doble Protective Relay Test Set F6150: Doble Protective Relay Test Set F6150: Doble Protective Relay Test Set
Request Quote Print Page
Specifications Brochure Other1

The Doble F6150 relay test set is the total test solution for protection schemes. It can test everything from a single high burden electromechanical earth/ground fault relay, to complete modern multi-function numerical microprocessor protection schemes without the need for additional instruments. It can perform steady state, dynamic state and transient simulation test. The F6150 can even be used for synchronized end-to-end, protection scheme tests using Global Positioning System technology to synchronize remotely located F6150's.

It’s a single box solution used by protection engineers worldwide to ensure protection system performance and reliability for 1A and 5A protection. Using the F6300 High-Power Current Amplifier in combination with the Doble F6150 protective relay tester takes you to the next level of realistic power system simulation for protection scheme testing.

The F6150 is the only instrument that can test the full range of protection schemes, electromechanical, numerical and combinations of all types. With the Doble F6150, you can easily run a wide variety of tests to determine whether your relays are detecting signals properly, communicating correctly, and responding appropriately to power system events.

In addition, with its high accuracy output, the F6150 can be easily applied to calibration testing of transducer and energy metering application including meters rated at 0.2 Class.
 

Doble F6150 Specifications:

 
Input Power 90-264 VAC
47-63 Hz
Source Configurations
Voltage Source
Power and Range 3 X 150 VA 75, 150, 300V
6 X 75 VA 75, 150 V

Each voltage source can be configured as a high power, low current range source to test high impedance ground/earth fault relays.

Power and Range 3X150 VA    0.5, 1, 1.5 A
6X75 VA    0.5, 1 A
1X450 VA   1.5, 3, 6 A
Accuracy < 0.02% typical
Current Source
Power and Range 3 X 150 VA    7.5, 15, 30 A
6 X 75 VA    7.5, 15 A
1 X 450 VA   7.5, 15, 22.5, 30, 45, 90 A
Accuracy < 0.02% Typical

Each current source can be used in a transient mode which provides 50% more power at 2X current range

Phase Angle 0 to + 359.9° (Lead)
0 to -359.9° (Lag)
Accuracy < 0.1° typical
Frequency
Range DC to 3 kHz
Accuracy 0.5 PPM
Number of Logic Inputs 8
Number of Logic Outputs 8
Operating
Temperature 0° to 50 °C / 32 ° 122°F
Enclosure High impact, molded, flame retardant ABS - Meets National Safe Transit Association testing specification No. 1A for immunity to severe shock and vibration
Dimensions 15 X 9.5 X 18 inches
Weight 37.5 lb