EM Test OCS 500N6F Damped Oscillatory Wave Simulator 3MHz/10MHz/30MHz

Rent EM Test OCS 500N6F Damped Oscillatory Wave and Ringwave Simulator
Enlarge Image
Request Quote Print Page
Datasheet
The EM Test OCS 500N6F Damped Oscillatory Wave and Ringwave Simulator includes the test capabilities for fast damped oscillatory waves at 3MHz/10MHz/30MHz up to 4.4kV and is extendable for slow damped oscillatory waves at 100kHz/1MHz up to 3.0kV (as per IEC 61000-4-18) and for ringwave up to 6kV as per IEC 61000-4-12. Damped Oscillatory Waves are repetitive transients mainly occurring in power, control and signal cables installed in high voltage and medium voltage stations, divided into slow and fast damped oscillatory waves. The Ringwave is a non-repetitive damped oscillatory transient occurring in low-voltage power, control and signal lines supplied by public and non-public networks. The OCS 500N6F can also be used to perform magnetic field tests as required in IEC 61000-4-10 using a magnetic field coil such as the MS 100N. Also compliant with the ANSI/IEEE C37.90.


Features:


  • Fully automated single box test system
  • Single DUT port
  • Fast Damped Oscillatory Waves up to 4.4kV
  • Slow Damped Oscillatory Waves up to 3kV (option)
  • Ringwave up to 6kV (option)

Specifications:


Direct: Via HV-safety lab connectors
Coupling Mode: Line to line
Line(s) to ground (PE)
DUT Supply OCS 500N6F: AC: 250V/16A; 50/60Hz
DC: 250V/10A
DUT Supply OCS 500N6F.1: AC: 250V/32A; 50/60Hz
DC: 250V/20A
DUT Supply OCS 500N6F.2: AC: 3x440V/16A; 50/60Hz
DC: 250V/10A
DUT Supply OCS 500N6F.3: AC: 3x440V/32A; 50/60Hz
DC: 250V/20A
CRO Trigger: 5V trigger signal for oscilloscope