Teseq NSG 3060 Transient Generator

The Teseq NSG 3060 Multi-Function Generator generates surge voltage to 6.6 kV and emits an EFT/Burst pulse of up to 4.8 kV/1 MHz. Teseq NSG 3060 devices simulate electromagnetic interference effects for the purpose of immunity testing in compliance with manufacturer, national and international standards. The Teseq NSG 3060 6.6 kV is designed to fulfill requirements for CE mark and ANSI C62.41 testing, including Combination wave, Ring wave and EFT pulses as well as PQT. Extensive expansion capability enables the system to be configured for a much broader range of applications, also fulfilling standards such as IEC 61000-4-5, IEC 61000-4-12, IEC 61000-6-5, and IEC 61000-6. The architecture of the units allow individual pulse modules to be calibrated separately; calibration data and correction factors can be stored on the controller. The 7" color TFT display features a touchscreen interface, a wheel with step size keys and large, start-stop-pause keys.

Product Info Available Add-Ons Related Compliance Standards Related Products

Surge Combo Wave Pulse

Pulse Conforms to IEC/EN 61000-4-5 and ANSI (IEEE) 62.41

Parameter	Value
Pulse voltage (open circuit)	200 V – 6.6 kV (in 1 V steps)
Pulse current (short circuit)	100 A – 3.3 kA
Impedance	2/12 Ω
Polarity	Positive / negative / alternate
Pulse repetition	10 s, up to 600 s (in 1 s steps)
Test duration	1 – 9999 pulses, continuous
Phase synchronization	Asynchronous, synchronous 0 – 359º (in 1º steps)
Coupling	ANSI / IEC / External

Burst (EFT) 5/50 ns

Pulse conforms to IEC/EN 61000-4-4

Parameter	Value
Pulse amplitude	200 V – 4.8 kV (in 1 V steps) - open circuit 100 V – 2.4 kV (50 Ω matching system)
Burst frequency	100 Hz – 1000 kHz
Polarity	Positive / negative / alternate
Repetition time	1 ms – 4200 s (70 min)
Burst time	1 µs – 1999 s, single pulse, continuous
Test duration	1 s – 1000 h
Phase synchronization	Asynchronous, synchronous 0 – 359º (in 1º steps)
Coupling	ANSI / IEC / External

PQF Dips & Drops

Conforms to IEC/EN 61000-4-11, IEC/EN 61000-4-29

Parameter	Value
Dips & Interrupts	From EUT voltage input to 0 V, 0%
Uvar with optional variac	Depending on model (VAR 3005)
Uvar with step transformer	0, 40, 70, 80% (INA 650x)
Peak inrush current capability	500 A (at 230 V)
Switching times	1 – 5 μs (100 Ω load)
Event time	20 µs – 1999 s, 1 – 99’999 cycles
Test duration	1 s – 70’000 min, 1 – 99’999 events, continuous
Repetition time	40 µs – 35 min, 1 – 99’999 cycles
Phase synchronization	Asynchronous, synchronous 0 – 359º (in 1º steps)