EMC Partner DOW3000 Oscillatory Wave Generator

Need Help? Call (800) 404-2832ATEC Assurance
Rent EMC Partner DOW3000 Slow/Fast Damped Oscillatory Wave Generator
Enlarge Image
EMC Partner DOW3000
Request Quote Print Page
DOW3000 Datasheet Supplemental Document
The EMC Partner DOW3000 Oscillatory Wave Generator produces Damped Oscillatory Wave (DOW) signals via a 32A capacitative coupling clamp at an oscillation frequency of 3, 10 or 30MHz, with a usable cable diameter of 4 - 70mm and a maximum insulation voltage of 5kV (1.2/50us). EMC Partner DOW3000 devices generate slow wave DOW signals at an oscillation frequency of 100kHz or 1MHz and fast wave DOW signals at a frequency of 3, 10 or 30MHz, with source impedences of 200 ohms and 50 ohms respectively. For both slow and fast wave DOW signals, the unit operates at a voltage range of up to 4.4kV. The EMC Partner DOW3000 protects your electronic measurement equipment from environmental disturbances to your energy distribution network. A configurable test system capable of conducting slow wave, fast wave and impulse voltage testing or any combination of the three, EMC Partner DOW3000 models are built with a modern, accessible interface and easy to follow menu structure, with graphic and contextual help functions to render operation simple and efficient. Technicians rent the EMC Partner DOW3000 to fulfill testing requirements like IEC 61000-4-18, IEC 60255, ANSI C37.90.1 1.2 and IEC 61000-4-10.
EMC Partner DOW3000 Features
  • Slow Wave, Fast Wave or Impulse Voltage testing or any combination
  • Integrated 32A Three Phase Coupler
  • Oscillatory Wave from 100KHz to 30MHz
  • External data line coupler
  • Supports magnetic field testing
  • Phase angle synchronization
  • Programmable test routines and setups
  • Includes 0.5 J / 500 Ohm insulation impulse (1.2/50 us)
  • Modular extendable configuration
  • Cost and time effective solution
  • One EUT connection for all configurations
  • Intuitive user interface, low learning curve
  • Test levels higher than standard requires
EMC Partner DOW3000 Specs
Capacitive Coupling Clamp
Oscillation Frequency (MHz) 1, 10, 30
Usable Cable Diameter 4 - 70mm
Maximum Insulation Voltage 5kV (1.2/50us)
Data Line Common Specifications
Maximum EUT Voltage AC 300V
Maximum EUT Voltage DC 200V
Maximum EUT Current 3A per line
Coupling capacitance Slow DOW 0.5uF
Coupling Modes Common Mode
Differential Mode
Damped Oscillatory Waves (SLOW)
Oscillation frequency 100kHz & 1MHz
Voltage range Up to 4.4kV
Source impedance 200 ohms
Burst repetition at 100kHz Up to 50Hz
Burst repetition at 1MHz Up to 500Hz
Damped Oscillatory Waves (FAST)
Oscillation frequency (MHz) 3, 10, 30
Voltage range Up to 4.4kV
Source impedance 50 ohms
Burst repetition all frequencies Up to 5kHz
Surge IEC 60255-5 0.5J 500 Ohm
Waveform at no load 1.2 / 50 us
Rise time 1.2μs
Adjustable voltage range 500V - 8000V
Damped Oscillatory Waves Magnetic Field with MF1000-1
Oscillation frequency 100kHz & 1MHz
Antenna dimension 1m x 1m
Current range 1 - 150A (100A/m)
EMC Partner DOW3000 Standards
  • IEC 60255-27: Measuring Relays and Protection Equipment
  • IEC 62052-11: Electricity Metering Equipment (AC) General Conditions
  • ANSI C37.90.1: IEEE Standard for Surge Withstand Capability for Relays and Relay System
  • IEC 61000-4-18: Electromagnetic compatibility (EMC) : Testing and measurement techniques
  • IEC 61000-4-10: Testing and Measurement Techniques : Damped Oscillatory Magnetic Field