EMC Partner IMU3000 Immunity Tester

Tech Support
(800) 404-2832

With Every
Rental

Worldwide
Delivery

Larger

SKU: EMCP-IMU3000-PKG01

Categories

Documents

The EMC Partner IMU3000 is an immunity test system that can be used for many transient tests including EFT/burst, magnetic field, voltage dips & interrupts, and more. This is a powerful and user-friendly tool, complete with an ethernet interface compatible with TEMA 3000 software.

The IMU3000 can cover all international standards because of its surge voltages up to 8kV combining with EFT up to 6kV. It is most commonly used with IEC 61000-4-4, the EFT test, for which it is fully compliant.

Specifications
Features
Applications
Options
Accessories
Standards
Videos

Specifications

ESD

Air Discharge	0.5 up to 16 kV
Contact Discharge	0.5 up to 10 kV
Continuous Firing mode	0.5 up to 16 kV
Voltage increment resolution	1 volt steps
Contact discharge repetition interval	0.05 s to 30 s
Discharge detection	every pulse or real discharges only
Discharge counter	1 to 29999
Discharge polarity	Positive / Negative / Alternating
Holding time	5 s
Programmable parameter ramps	voltage, polarity
Discharge trigger	manual or automatic

Burst

	EFT 5kV	EFT 6 kV
Voltage range	0.25 up to 5.1 kV	0.25 up to 6.1 kV
Voltage amplitude into 50ohm	0.125 up to 2.55 kV	0.125 up to 3.05 kV
Voltage amplitude into 1kohm	0.24 up to 4.8 kV	0.24 up to 5.8 kV
Source impedance	50 ohm	50 ohm
Pulse front time at 50ohm	5 ns	5 ns
Pulse duration at 50ohm	50 ns	50 ns
Burst duration	0.01 up to 30 ms	0.01 up to 30 ms
Burst repetition	1 up to 1000 ms	1 up to 1000 ms
Spike repetition frequency	up to 1 MHz	up to 1 MHz
Polarity	Positive / Negative	Positive / Negative
Spike distribution	IEC burst pattern and random	IEC burst pattern and random

Surge Impulses

	EXT-IMU3000 S (CWG)	EXT-IMU3000 T (TELECOM)	EXT-IMU3000 R (RINGWAVE)
Voltage range	0.25 up to 8kV	0.25 up to 8kV	0.25 up to 8kV
Current range	0.125 up to 4kA	6.25 up to 200A	21 up to 667A
Source impedance	2ohm	15ohm	12ohm & 30ohm
Serial resistance common mode	10ohm	25ohm	N/A
Pulse front time at open circuit	1.2µs	10µs	0.5µs
Pulse duration at open circuit	50µs	700µs	N/A
Pulse front time at short circuit	8µs	5µs	< 1µs
Pulse duration at short circuit	20µs	320µs	N/A
Ringing Frequency	N/A	N/A	100kHz
Pulse repetition	up to 60 pulses per minute	up to 20 pulses per minute	N/A
Pulse repetition at maximum voltage	6 pulses per minute	3 pulses per minute	60 pulses per minute
Polarity	Positive / Negative / Alternating	Positive / Negative / Alternating	Positive / Negative / Alternating
Programmable parameter ramps	voltage, synchronisation, polarity	voltage, polarity	voltage, synchronisation, polarity
Synchronisation on power line frequencies	Yes	N/A	N/A

Dips, Interrupts, and Variations

	EXT-TRA3000 D (AC Dips)	EXT-TRA3000 D (DC Dips)	EXT-TRA3000 V (Voltage Variation)
Voltage range	0 up to 250V	20 up to 300V	0 up to 260V
Frequency range with variac	48 up to 60Hz	N/A	N/A
Nominal current	16A	N/A	N/A
Current Range	N/A	0 up to 10A	N/A
Rated Current	N/A	N/A	5A
Interruption time	50µs up to 30s	1 up to 29999ms	N/A
Amplitude interrupt with internal variac	0 up to 100% max. 5A	N/A	N/A
Phase angle to turn on and off	0° up to 360°	N/A	N/A
Voltage variation with internal variac	0 up to 110% max. 5A	N/A	N/A
Interrupt less than 1 period	Input by phase angle	N/A	N/A
Interrupt more than 1 period	Input in milli seconds	N/A	N/A
Programmable parameter ramps	voltage, synchronisation, interrupt	N/A	N/A
Rise and fall time at 100ohm load	1 up to 5µs	1 up to 50µs	N/A
Ramp Transition Time	N/A	N/A	25 up to 999 periods

EMC Partner IMU3000 Immunity Tester

RELATED PRODUCTS