Haefely AXOS8 Compact Conducted Immunity Test System
- 0.2 – 5.0 kV ±10% at coaxial output
- 50 Ohms
- 5 ns ±30%
EMC Partner IMU-MGE Conducted Immunity Test System
- Surge / CWG 4kV / 5 kV / 6kV / 8kV
- Ring Wave 6kV / 8kV
- EFT 4kV / 5kV / 6kV / 7kV
Haefely AXOS5 Compact Immunity Test System
- Easy to operate with manual and automated test modes, software assisted test preparation
- Pre-defined test routines and visual aided test setups
- Economic & efficient touch screen guarantees reduction of time and effort
EMC Partner IMU3000 Immunity Tester
- 7” Colour touch panel
- Rotary knob for navigation and data entry
- EPOS (EMC PARTNER Operating System) a new concept in graphical user interface
M Precision Laboratories EMCPro PLUS EMC Test System
- Portable, mid-range EMC test system
- Resident capabilities for compliance testing to 6 IEC/EN standards
- Addresses ANSI/IEEE C62.41, ITU, ETSI, & UL 864 standards
NoiseKen INS-4040 Impulse Noise Simulator
- 0.01~4.00kV ±10%
- 50 Ω Load, 10 V Step
- < 1 ns Rise Time
EMC Partner IMU4000 Immunity Tester 4kV
EMC Partner IMU-MGS Conducted Immunity Generator
- One touch parameter editing in run state
- Impulse stability over long periods
- Intuitive multi touch graphical interface
Teseq NSG 3060 Transient Generator
- Modular, expandable system
- Surge voltage to 6.6 kV for overtesting
- Easy to use 7" color touch screen
Noiseken INS-4020 Noise Simulator
- Automatic ramp operation for output voltage, phase angle and repetition period
- Floating output
- Coupling mode selection by plugging the supplied coaxial connector to the selected port
EM Test NX5 Multifunctional Test Generator
- Small transient generator with 7" color touch screen
- IEC 61000-4-4 | Burst testing, 5.5kV
- IEC 61000-4-5 | Surge testing, 5.0kV
Teseq CDN 3083-B100 EFT/Burst Coupling/Decoupling Network
- 690 VAC, 1000 VDC
- Up to 8.8 kV burst pulses
- 100 A three-phase EFT / burst CDN
Teseq NSG 3025 Burst Generator
- Pulse form 5/50ns ±30% (50Ω)
- Pulse amplitude: 200 V to 4.8 kV ±10% (open circuit)
- Internal CDN: Single phase, in accordance with IEC 1000-4-4
Haefely IP4B Capacitive Coupling Clamp
- Designed as per IEC 61000-4-4 Edition 3
- EFT/Burst testing of signal and data lines
- For cable diameter from 4 – 40 mm
EMC Partner CN-EFT1000 Capacitive EFT/Burst Coupling Clamp
- Capacitive EFT/burst coupling clamp
- Complies with IEC 61000-4-4 EFT, IEC 61000-4-18, and ANSI C37.90.1 standards
- Used with the MIG Series
Noiseken FNS-AX4-A20 EFT/Burst Simulator
- Frequency range: 100 kHz - 2 MHz
- Output voltage: 200 - 5000V, 10V step
- Rise time: 5ns ± 30%
Teseq NSG 3040 Transient Generator
- Surge voltage to 4.4 kV
- EFT/Burst to 4.8 kV/1 MHz
- EUT Supply: 1-Phase
Noiseken FNS-AXII EFT Generator
- 5-inch LCD
- Continuous, Frequency Modulation, and Polarity Reversal modes
- For testing single and three phase EUTs
EM Test NX7 Multifunctional Test Generator
- Compact generator featuring 7" color touch screen
- IEC 61000-4-4 | EFT/Burst testing, 5.5 kV
- IEC 61000-4-5 | Surge wave/combination wave testing, 7.0 kV
EM Test UCS 500N5 Multifunctional EFT, Surge & Power Fail Generator
- Burst module (IEC/EN 61000-4-4) up to 5.5kV
- Surge module (IEC/EN 61000-4-5) up to 5kV
- TSurge module (IEC/EN 61000-4-5); optional
Teseq CDN 3425 Burst/EFT Coupling Clamp
- With Safety Cover or Interlock
- New design
- Complies with IEC 61000-4-4 Ed 2.0 2004