The Fluke DSX-8000 Cable Analyzer copper test solution enables cable testing and certification for network deployments up to 40 Gigabit Ethernet, including Cat 5e, 6, 6A, 8, or Class I/II cabling systems. The Fluke can achieve complete copper certification to Cat 6A in 8 seconds or certify two fibers at two wavelengths in just 3 seconds.
The Fluke DSX-8000 CableAnalyzer is the second model in the Fluke DSX CableAnalyzer Series.
Features
- Versiv™ modular design supports copper certification, fiber optic loss, OTDR testing, and fiber end-face inspection
- Unmatched speed for Cat 6A, 8, Class FA, I/II, and all current standards
- ProjX™ system manages job requirements and progress from set-up to systems acceptance
- Taptive™ user interface simplifies set-up and eliminates errors
- Analyze test results and create professional test reports using LinkWare™ management software
- Graphically displays the source of failures including crosstalk, return loss, and shield faults for faster troubleshooting
- Intertek Verified to TIA Level 2G
- Endorsed by cabling vendors worldwide
- Built in Alien Crosstalk testing capability
Specifications
Shielded and unshielded
pair LAN cabling |
TIA Cat 3, 4, 5, 5e, 6, 6A
8:100 Ω ISO/IEC Class C, D, E, EA, F, FA
I/II: 100 Ω and 120 Ω |
| Permanent link adapters |
Plug type: shielded RJ45
Optional Plug type: ARJ45/GG45 |
| Channel adapters |
Jack type: shielded RJ45
Optional Jack type: Tera, GG45/ARJ45 |
| Display |
5.7 in LCD display with a projected capacitance touchscreen |
| Operating temperature |
32° F to 113° F (0° C to 45° C) |
| Cat 6A / Class EA test time |
8 seconds |
| Cat 8 / Class I/II test time |
16 seconds |
| HDTDX/HDTDR diagnostic test times |
≈3 seconds |
| Internal memory |
≈5,000 Cat 8 with plots
≈12,000 Cat 6A with plots |
| Vibration |
Random, 2 g
5 Hz - 500 Hz |
Standards
- Compliant with ANSI/TIA-1152-A Level 2G and proposed standard IEC 61935-1 Ed
- 5 Level VI field tester accuracy requirements to 2000 MHz
- Supports the complete suite of resistance unbalance standards needed for power over Ethernet (PoE) – IEEE 802.3bt, ANSI/TIA/EIA-568, ISO/IEC 11801 series documents
- TCL and ELTCTL measurements compliant to IEC 61935-1-1 (Draft)