Advanced Analyzers HFA-3-36-REF
- Up to Harmonic 40
- Can be optionally selected to show 2 - 9 kHz
- 0 - 350 V-rms ±500 Volt peak std
EM Test 3-Phase Netwave Series AC/DC Power Supply
- Wide Power Bandwidth; DC - 5kHz
- Output Power up to 60,000VA AC / 72,000W DC
- Output Voltage up to 3*360V AC (p-n), +/-500V DC
Newtons4th PPA5531 Flicker and Harmonics Analyzer
- Fully Compliant Harmonics and Flicker Test Solutions
- Leading wideband accuracy Basic 0.01% with class leading high frequency performance
- ISO17025 accredited ISO17025 IEC61000 certification available
Newtons4th IMP753 Impedance Network
Advanced Analyzers AA-HFA-3-75-Z-REF-Z-TEST
- 0 - 36 A-rms
- 0 - 100 A-pk for 10 seconds
- 1 - 15000 VA
Yokogawa WT1806E Precision Power Analyzer
- 6 channels
- Measurement bandwidth: DC, 0.1 Hz − 1 MHz
- Current input (internal): 5 A/50 A
Teseq Profline 2105 | 1 ph, 5 KVA
- 5 kVA output power
- Immunity test system that is simple to upgrade, pc-based
- Accessible control interface
Keysight PA2203A IntegraVision Power Analyzer | 4 Channels, 3-Phase AC
- Operates like an oscilloscope, but makes measurements like a power analyzer
- Achieve 0.05% basic accuracy for superior measurement integrity
- The PA2201A comes with 2 power channels for single phase measurements and analysis; the PA2203 has 4 power channels for 3-phase measurement and analysis
Danisense 6 Channel Current Transducer System
- Compact 19” rack mount 1U height
- AC Input: 85 - 264V, auto ranging
- Frequency: 47 - 63Hz, auto ranging
Tektronix PA4000 Power Analyzer, DC - 1 MHz, 30 ARMS, 1000 VRMS
- 1 to 4 Input Modules allows several configurations to match your application
- High measurement accuracy of 0.04% (basic voltage & current accuracy) for demanding test requirements
- Dual internal current shunts for each module maximize accuracy for high- and low-current measurements
Teseq NSG 1007-5 Single Phase AC and DC Power Source
- 5 kVA AC Source L-L three phase input
- Single phase output
- Arbitrary waveform generation
CNS Poway HFA-16/75 1 Phase Harmonics & Flicker Analyzer
- ISO-17025 accredited device
- 16 bit USB based data acquisition
- PLL based sampling method
DaniSense DS600ID 600Arms Current Transducer
- 1ppm maximum linearity error
- Fluxgate loop technology
- DSUB 9 pin connection
Keysight N6705A DC Power Analyzer | 600 W
- Easy to use R&D tool for sourcing and measuring DC voltage and current into the DUT
- Integrates capabilities of up to 4 Power Supplies, DMM, Scope, Arb and Data Logger
- Access all capabilities without programming; either use the front panel controls or the 14585A Control and Analysis Software
Xitron 2503AH Series Power Analyzer
- 18-bit, 500 kHz sampling speed provides 0.05% basic accuracy
- Ultra-fast FFT’s per channel produce measurements in 10 ms
- 3000 V Peak, 50 Amp Peak internal shunt and Hall effect CT’s
NH Research S320 Power Supply Analyzer
- Level of flexibility normally associated with custom design instruments
- Ability to control DC power supplies along with DC dynamic loads within the same 5.25 in chassis
- Allows for power quality analysis
Danisense DS50ID 50Arms Current Transducer
- Linearity error maximum 8 ppm
- Fluxgate, closed loop compensated technology with fixed excitation frequency and second harmonic zero flux detection for best in class accuracy and stability
- Industry standard DSUB 9 pin connection
Voltech IEC555 Reference Impedance Network
California Instruments PACS-1 Harmonics/Flicker Test System
- AC Line Distortion Compensation - PCTS Software compensates for AC Line distortion.
- PC Based Operation - Simple to use Windows GUI automates and documents test procedures and easily accommodates future IEC standard changes.
- Upgradable to Full Compliance Level - PCTS can be field upgraded to full compliance by adding a California Instruments AC Power Source.
Vitrek PA900 Precision Harmonic Power Analyzer
- Unprecedented range of capabilities
- Noise floor—as low as 1ppm vs 300ppm or more on competitive units
- Large, high-resolution color display: shows all the data you want with a touchscreen interface
Teseq NSG 1007 AC & DC Power Sources
- Combination AC and DC power source and power analyzer
- Arbitrary waveform generation
- Built-in digital power analyzer
Fluke Norma 5000, N5K High Precision Power Analyzer
- Number of phases: 3, 4 or 6
- Bandwidth: dc to 3 MHz or dc to 10 MHz depending on input module
- Basic Accuracy: 0.2%, 0.1% or 0.03% depending on input modules
EM Test Netwave Series, Single Phase AC/DC Power Source
- Wide Power Bandwidth; DC - 5kHz
- Output Power up to 7,500VA AC and 9,000W DC
- Output Voltage max. 360V AC and +/- 500V DC
California Instruments MX Compliance Test System Series
- Direct PC bus access data acquisition system provides the required sampling rate and resolution to meet IEC 61000-4-7 measurement requirements and supports high speed data transfers, unlike competing
- PC based Harmonic and Flicker test software provides real-time full color data display updates and continuous PASS/FAIL monitoring.
- Automatic calculation of the maximum permissible system impedance Zsys, using the Zref and measured Flicker parameters, as required per EN/IEC 61000-3-11.
CA Instruments MX90 Power Source and Compliance Test System
- Output: 90kVA, 0-150/300V, 3ph
- Frequency Range: 16Hz - 1000Hz
- Input Power: 208/480 ±10%VAC, 3ph