Teseq NSG 1007-5 Single Phase AC and DC Power Source Rentals

Teseq NSG 1007-5 Single Phase AC and DC Power Source

By combining a flexible AC/DC power source with a high performance power analyzer, the Teseq NSG 1007-5 Single Phase AC and DC Power Source is capable of handling complex applications that have traditionally required multiple instruments.

The NSG 1007-5 is available in two models: 208 V and 400 V.

Newtons4th IMP753 Impedance Network

Advanced Analyzers HFA-3-36-REF

Up to Harmonic 40
Can be optionally selected to show 2 - 9 kHz
0 - 350 V-rms ±500 Volt peak std

EM Test 3-Phase Netwave Series AC/DC Power Supply

Wide Power Bandwidth; DC - 5kHz
Output Power up to 60,000VA AC / 72,000W DC
Output Voltage up to 3*360V AC (p-n), +/-500V DC

Newtons4th PPA5531 Flicker and Harmonics Analyzer

Fully Compliant Harmonics and Flicker Test Solutions
Leading wideband accuracy Basic 0.01% with class leading high frequency performance
ISO17025 accredited ISO17025 IEC61000 certification available

Advanced Analyzers AA-HFA-3-75-Z-REF-Z-TEST

0 - 36 A-rms
0 - 100 A-pk for 10 seconds
1 - 15000 VA

Teseq Profline 2105 | 1 ph, 5 KVA

5 kVA output power
Immunity test system that is simple to upgrade, pc-based
Accessible control interface

CNS Poway HFA-16/75 1 Phase Harmonics & Flicker Analyzer

ISO-17025 accredited device
16 bit USB based data acquisition
PLL based sampling method

Yokogawa WT5000 Precision Power Analyzer

Basic power accuracy of ±0.03%
10 MS/s, 1MHz power bandwidth
Peak voltage of 2.5 kV or RMS of 1.5kV

Yokogawa WT3000 Precision Power Analyzer

Basic accuracy: 0.01% of reading
Basic power accuracy: 0.02% of reading
30A current input element

Teseq NSG 1007 AC & DC Power Sources

Combination AC and DC power source and power analyzer
Arbitrary waveform generation
Built-in digital power analyzer

Teseq Profline 2103 3 kVA Harmonics & Flicker Measuring System

Low cost system for small DUTs
Complete test system including clean power source
Simulated flicker impedance, no need for expensive physical impedance

Teseq ProfLine 2100 Harmonics and Flicker Measuring System

California Instruments PACS-1 Harmonics/Flicker Test System

AC Line Distortion Compensation - PCTS Software compensates for AC Line distortion.
PC Based Operation - Simple to use Windows GUI automates and documents test procedures and easily accommodates future IEC standard changes.
Upgradable to Full Compliance Level - PCTS can be field upgraded to full compliance by adding a California Instruments AC Power Source.

EM Test Netwave Series, Single Phase AC/DC Power Source

Wide Power Bandwidth; DC - 5kHz
Output Power up to 7,500VA AC and 9,000W DC
Output Voltage max. 360V AC and +/- 500V DC

California Instruments MX Compliance Test System Series

Direct PC bus access data acquisition system provides the required sampling rate and resolution to meet IEC 61000-4-7 measurement requirements and supports high speed data transfers, unlike competing
PC based Harmonic and Flicker test software provides real-time full color data display updates and continuous PASS/FAIL monitoring.
Automatic calculation of the maximum permissible system impedance Zsys, using the Zref and measured Flicker parameters, as required per EN/IEC 61000-3-11.

CA Instruments MX90 Power Source and Compliance Test System

Output: 90kVA, 0-150/300V, 3ph
Frequency Range: 16Hz - 1000Hz
Input Power: 208/480 ±10%VAC, 3ph

California Instruments MX45 AC Power Source

Output: 45kVA, 0-150/300V, 3ph
Frequency Range: 40 - 1000Hz
Input Power: 208/480 ±10%VAC, 3ph

Kikusui KHA3000 Harmonic/Flicker Analyzer for IEC61000-3-2/3/11/12, IEC61000-4/7/15

Supports harmonic and flicker compliance testing of single-phase and three-phase equipment
Installed with the latest standards of both harmonic and flicker limits
No need for a PC for compliance testing