AE Techron 7228 Linear Power Amplifier

Name: AE Techron 7228 Linear Power Amplifier Rental
Brand: AE Techron
SKU: AETE-7228-rent
Price: 869.00 USD
Availability: InStock

DC – 1 MHz, 1 kW

The AE Techron 7228 Linear Power Amplifier has a frequency range of DC - 1 MHz, a gain of 20V, and an AC power of 1000W RMS. The 7228 is typically used to create waveforms as required by a variety of EMC standards for DC powered electronics like DO-160 (section 18 & 19), and MIL-STD 461. Combined with the AE Techron 3110 Standards Waveform Generator, the 7228 is capable of meeting all standards specified in the tab below.

Customers also rent:

Product Info Available Add-Ons Related Compliance Standards Related Products

Frequency Response (DC - 1 MHz)	(1 watt): ±3 dB
Gain	Voltage Mode: 20 volts/volt Current Mode: 5 amperes/volt
AC Power (up to 20 kHz)	1000 W RMS
Small Signal (8V p-p)	1 MHz
DC Power	16A @ 13.5 VDC
Output Voltage	±150 Vp
Output Impedance	5.3 mΩ in series with 0.95 µH
Gain Linearity (over input signal, from 0.2V to 5V)	DC: 0.05% AC: 0.15%
Max Input Voltage	±10V, balanced or unbalanced
Dimensions (W x H x D)	19 in x 22.75 in x 3.5 in
Weight	41 lbs

Bandwith: DC to 1 MHz and improved performance at frequencies above 100 kHz.
AC Power (up to 20 kHz): 1000 watts RMS.
For FMC 1278, DO-160, and MIL STD 461 testing.
Changes to protection, connection type and modes of operation are accomplished quickly by changing back-panel DIP switches or via remote contact closure
Provides user-selectable current limit, DC Blocking and DC Servo for transformer-based loads
Series or Parallel systems can be configured using back-panel DIP switches or remote contact closure
Ballast resistors are not required for connecting multiple amps in parallel
Monitors for excessive ground currents and moves to Standby when these conditions occur
Variable-speed, thermostatically controlled cooling fans minimize noise and reduce the fatigue of test personnel
Stable when driving highly capacitive loads
Four-quadrant operation

Ford EMC CS-2009.1 (2-11-2010)
- Pulse f1 (13.5V)
- Pulse f2 (13.5V)
- Pulse g1 (13.5V loaded condition)
- Pulse g1 (13.5V open circuit condition) NEW Pulse g2-a (13.5) (unsuppressed) Pulse g2-b (13.5V) (suppressed)

Ford FMC1278 (2-11-2010)
- CI 220:
- Pulse 2b (24V)
- Pulse 5a (12V)
- Pulse 5a (24V)
- Pulse 5b (12V)
- Pulse A1 (12V)

ISO 7637-2 (2011) (E)
- 5.6.5 Transient Immunity, Test Pulse 5A, 12V
- 5.6.5 Transient Immunity, Test Pulse 5B, 24V

ISO 16750-2 (2012-11) ( E )
- A.3.1 Load Dump Pulse Verification 12V 2ohm Load
- A.3.1 Load Dump Pulse Verification 12V No Load
- A.3.1 Load Dump Pulse Verification 24V 2ohm Load
- A.3.1 Load Dump Pulse Verification 24V No Load
- 4.6.4.2.2 Load Dump Test A (without suppression) 12V
- 4.6.4.2.2 Load Dump Test A (without suppression) 24V
- 4.6.4.2.3 Load Dump Test B (with suppression) 12
- 4.6.4.2.3 Load Dump Test B (with suppression) 24

Volkswagen VW TL 820 66 (2006-11)
- 5.2.5 Pulse 5B 42V

Avionics Tests:
- MIL-HDBK-704-8 (9-APRIL-2004)
- LDC104 28VDC, Total Ripple Condition A, 704A
- LDC104 28VDC, Total Ripple Condition A, 704B, C, D, E & F
- LDC104 28VDC, Total Ripple Condition B, 704A
- LDC104 28VDC, Total Ripple Condition B, 704B, C, D, E & F
FMC 1278
DO-160
MIL-STD-461