Related Products

Haefely AXOS8 Compact Conducted Immunity Test System
- 7 kV Surge
- 7 kV Ring Wave
- 5 kV EFT/Burst


EMC Partner AVI-LV3 Indirect Lightning Generator
- RTCA/DO-160G S22
- MIL-STD-461G CS117
- Cable Induction (CI)


Haefely PSURGE 30.2 Surge Test System | 30 kV / 30 kA
- Up to 30 kV impulse voltage
- Up to 30 kA impulse current
- automatic polarity switching


Haefely AXOS5 Compact Immunity Test System
- 5 kV Surge
- 5 kV EFT/Burst
- Built-in 1 ph,16 A, 264 V CDN


Solar 2654-2 Lightning Transient Generator System for DO-160
- The controller and power supply module
- Waveform timing
- The high voltage power supply


EMC Partner IMU-MGE Conducted Immunity Test System
- Surge / CWG 4kV / 5 kV / 6kV / 8kV
- Ring Wave 6kV / 8kV
- EFT 4kV / 5kV / 6kV / 7kV


EMC Partner IMU3000 Immunity Tester
- 8kV Surge
- 6.1kV Burst
- 300V Dips & Drops


Teseq CDN 3063-S100 3-Phase Coupling/Decoupling Network
- Three phase models with broad current range up to 100 A
- Fully automated surge and/or burst coupling
- IEC and ANSI coupling methods


Haefely PSURGE 8000 Surge Platform Test System
- Built according to IEC/EN 61000-4-5 Ed. 1 & 2 and ANSI C62.41/45
- 1.2/50 µs open circuit up to 7.4 kV
- 8/20 µs short circuit up to 3.7 kA


M Precision Laboratories EMCPro PLUS EMC Test System
- Portable, mid-range EMC test system
- Resident capabilities for compliance testing to 6 IEC/EN standards
- Addresses ANSI/IEEE C62.41, ITU, ETSI, & UL 864 standards


Thermo Keytek ECAT E521
- AC CDN for single-phase lines to 480V, 32A
- Surge Repetition Rate 1 shot/30 seconds @ <=10kV 1 shot/minute @ >10kV
- Open-Circuit Voltage: 1.2/50µs, 200V to 20.2kV ±10%


Teseq NSG 3060 Transient Generator
- Modular, expandable system
- Surge voltage to 6.6 kV for overtesting
- Easy to use 7" color touch screen


EMC Partner IMU-MGS Conducted Immunity Generator
- One touch parameter editing in run state
- Impulse stability over long periods
- Intuitive multi touch graphical interface


EMC Partner IMU4000 Immunity Tester 4kV


Thermo Keytek ECAT E103 Control Center
- Virtual Front Panel™ retains key operating parameters during set up & testing
- Multi-level system interlock architecture provides maximum safety
- Single output port/instant mode switching


Teseq NSG 3150 Combination Wave Surge Generator | 15 kV
- Surge voltage up to 15 kV
- CDN range: Single & Three Phase, up to 63 A, 690 VAC, 1000 VDC
- Safest 15 kV connector type on the market


EMC Partner CN-GI-CI-V Voltage Coupling Transformer for WF4/WF5A Coupling
- WF4 cable bundle test exceeding level 3 requirement (300V)
- WF5B can be coupled up to level 3 on single and multiple strokes
- Injection probe for WF4, WF5A (voltage) in cable induction mode


EM Test NX5 Multifunctional Test Generator
- 5kV Surge
- 5.5kV EFT/Burst
- 1 Ph 16A CDN


EM Test UCS 500N5 Multifunctional EFT, Surge & Power Fail Generator
- 5kV Surge
- 5.5kV Burst
- 5kV ± 10% TSurge


Haefely VTM 15000/05 Impulse Transformer For Isolation Testing
- 1.2/50μs voltage impulse
- Output amplitude up to 15kV (PSURGE 8000 & PIM 100)
- Output amplitude up to 14kV (AXOS 8)


EMC Partner EMCP-INS-1250 Impulse Surge Generator
- Operating V: 100-240V (50/60Hz) ±10%
- Output impedance: 40Ω
- Consumed VA: ON<150VA, standby<15VA


Ophir OTG117 Induced Lightning System


Teseq CDN3063-C32 Coupling/Decoupling Network
- 3-phase models with broad current range
- Fully automated surge and burst coupling
- IEC and ANSI coupling methods


Thermo Keytek ECAT E522
- AC CDN for three-phase lines to 480V, 32A/phase
- Surge Repetition Rate 1 shot/30 seconds @ <=10kV 1 shot/minute @ >10kV
- Open-Circuit Voltage: 1.2/50µs, 200V to 20.2kV ±10%


EM Test NX7 Multifunctional Test Generator
- 7 kV Surge
- 7 kV Ring Wave
- 5.5 kV EFT/Burst
