Keysight N9038A MXE Series | 3 Hz – 3.6/8.4/26.5/44 GHz
- Consistent measurement framework
- Broadest set of applications
- Upgradeable processor, memory, connectivity, and more
GAUSS INSTRUMENTS TDEMI ULTRA40 | 9 kHz – 40 GHz
- A frequency range from DC up to 40 GHz
- 685 MHz real-time analysis bandwidth
- Dynamic range of more than 100 dB
GAUSS INSTRUMENTS TDEMI X40 | 9 kHz – 40 GHz
- Frequency range from DC up to 40 GHz
- 645 MHz real-time analysis bandwidth
- Dynamic range of more than 100 dB
PMM 9180 | 6 – 18 GHz
- 6 GHz to 18 GHz Frequency Range
- 100 HZ Resolution
- < 2 ppm Reference Frequency
PMM ER8000 FFT | 9 kHz – 3 GHz
- Full compliant Measurement band B in 2 seconds
- Full compliant Measurementb band C+D in 60 seconds
- Built-in 16 A single phase LISN
Keysight E7405A
- 1 Hz to 5 MHz
- +12.5 dBm TOI
- Measurement rate: ≥40/sec
Rohde & Schwarz ESRP7 EMI Test Receiver | 10 Hz – 7 GHz
- EMI test receiver and signal/spectrum analyzer combined in one box
- Optional preselection and preamplifier (R&S ESRP-B2)
- Resolution bandwidths in line with CISPR, optionally in decade steps from 10 Hz to 1 MHz (R&S ESRP-B29)
Rohde & Schwarz EPL1000 | 5 kHz – 30 MHz
- Frequency range of 5 kHz to 30 MHz
- Preselection filters
- Time domain scan
Narda PMM CDD-4 Continuous and Discontinuous Disturbances Analysis and Verification Set
- PMM CA0010 Click Analyzer Features Internal 16 A single-phase LISN, fully CISPR 16-1-2 compliant 150 kHz – 30 MHz: just plug the EUT power cord and go RF in front-end with preselection
- Internal 16 A single-phase LISN, fully CISPR 16-1-2 compliant 150 kHz – 30 MHz: just plug the EUT power cord and go
- RF in front-end with preselection filters and individual auto-attenuators for each of the four frequencies, to guarantee the best dynamic range as required by the challenging discontinuous
PMM 9010F | 10 Hz – 30 MHz
- The frequency range of the base PMM-9010F system can be extended to 18Ghz with the addition of the PMM 9030, 9060 and 9180 modules described in more detail below
- Frequency range: 10 Hz – 30 MHz, expandable to 3/6/18 GHz by the external modules 9030, 9060, 9180
- Very low noise floor: < -24 dBµV in band A, < -7 dBµV in band B
Emzer EMSCOPE | 9 kHz – 110 MHz
- Upgraded frequency range of 9 kHz - 110 MHz
- Built-in 2-port LISN
- Compact and cost-effective
PMM 9060 | 30 MHz – 6 GHz
- Modular approach for all budgets
- Eliminates long coax cables
- Built-in automatic test routines
PMM 9030 | 30MHz – 3GHz
- Modular approach for all budgets
- Eliminates long coax cables
- Built-in automatic test routines
PMM CA0010 Click Analyzer | 150 kHz, 500 kHz, 1.4 MHz, 30 MHz
- Performs discontinuous disturbance (click) analysis
- Designed to fulfill CISPR 16-1-1, CISPR 14-1 and IEC/EN55014-1 test standards
- Four independent frequency channels measure simultaneously
Tektronix RSA306B USB Real-Time Spectrum Analyzer | 9 kHz - 6.2 GHz
- Full-featured spectrum analysis capability with included Tektronix SignalVu-PC™ software
- 17 spectrum and signal analysis measurements standard
- Options for mapping, modulation analysis, WLAN, LTE, and Bluetooth standards support, pulse measurements, playback of recorded files, Signal Survey, and frequency/phase settling
Doble Spark P3 Universal PD & EMI Analyzer
- PD Frequency: 9kHz – 2GHz
- UWB Detection: 100kHz – 60MHz
- Dynamic Range: >120 dB
GAUSS INSTRUMENTS TDEMI eXtreme Series | 9 kHz – 1/3/6/18/26.5/40 GHz
- Real Time Spectrogram Real-time bandwith of 162.5 MHz, 645 MHz Upgrade Option Peak, Average and RMS Detector
- Real-time bandwith of 162.5 MHz, 645 MHz Upgrade Option
- Peak, Average and RMS Detector
PMM PL-01 9 kHz – 30 MHz Pulse Limiter
- Designed according to criteria of cheaply and compactness, it can be used together with PMM 8010 System for Conducted Interferences measurement, or any other RF receiver.
Keysight N9322C Basic Spectrum Analyzer (BSA) | 9 kHz - 7 GHz
- General purpose performance up to 7 GHz with -152 dBm DANL and ±0.6 dB overall amplitude accuracy
- See the real performance of your design with wider (to 1 GHz), deeper views of the most challenging signals
- Measure the spectral purity of your design with industry-leading phase noise and 78 dBc spurious-free dynamic range across 510 MHz bandwidth
Keysight N9048B PXE | 1 Hz – 44 GHz
- Compliant with CISPR 16-1-1:2019, MIL-STD-461G, ANSI C63.2, and FCC
- Industry leading sensitivity and dynamic range
- Time domain scan (TDS) significantly reduces overall test time
Keysight N9038A-526 | 3 Hz – 26.5 GHz
- DC frequency range 20 Hz to 26.5 GHz
- AC frequency range 10 MHz to 26.5 GHz
- CISPR bandwidth 200 Hz, 9 kHz, 120 kHz, and 1 MHz (MIL-STD and bandwidths incremented in 10% steps)
Keysight N9038A-508 | 20 Hz – 8 GHz
- DC Coupled Frequency Range 20 Hz to 8.4 GHz
- AC Coupled Frequency Range 10 MHz to 8.4 GHz
- CISPR bandwidth 200 Hz, 9 kHz, 120 kHz, and 1 MHz; MIL-STD and bandwidths incremented in 10% steps
PMM FR4003 | 9 kHz – 30 MHz
- Antenna CISPR 12, CISPR 16, CISPR 25, MIL-STD, DO-160 fully compliant
- Internal full CISPR 16-1-1 receiver
- Embedded attenuator, preamplifier and preselectors
Rohde & Schwarz ESW44 | 1 Hz – 44 GHz
- Standard-compliant EMI measurements in spectrum analyzer mode
- RF performance that meets exacting demands
- Exceptionally wide dynamic range
Rohde & Schwarz ESW Series | 1 Hz – 8/26.5/44 GHz
- Frequency ranges from 1 Hz to 8 GHz, 1 Hz to 26.5 GHz, and 1 Hz to 44 GHz
- In line with CISPR16-1-1, ANSIC63.2, MIL‑STD‑461 and FCC
- Extremely high dynamic range and ultra high accuracy for demanding certification measurements