Keysight N9038A MXE Series | 3 Hz – 3.6/8.4/26.5/44 GHz
- Consistent measurement framework
- Broadest set of applications
- Upgradeable processor, memory, connectivity, and more
GAUSS INSTRUMENTS TDEMI ULTRA40 | 9 kHz – 40 GHz
- A frequency range from DC up to 40 GHz
- 685 MHz real-time analysis bandwidth
- Dynamic range of more than 100 dB
GAUSS INSTRUMENTS TDEMI X40 | 9 kHz – 40 GHz
- Frequency range from DC up to 40 GHz
- 645 MHz real-time analysis bandwidth
- Dynamic range of more than 100 dB
PMM 9010F | 10 Hz – 30 MHz
- The frequency range of the base PMM-9010F system can be extended to 18Ghz with the addition of the PMM 9030, 9060 and 9180 modules described in more detail below
- Frequency range: 10 Hz – 30 MHz, expandable to 3/6/18 GHz by the external modules 9030, 9060, 9180
- Very low noise floor: < -24 dBµV in band A, < -7 dBµV in band B
PMM 9180 | 6 – 18 GHz
- 6 GHz to 18 GHz Frequency Range
- 100 HZ Resolution
- < 2 ppm Reference Frequency
PMM 9060 | 30 MHz – 6 GHz
- Modular approach for all budgets
- Eliminates long coax cables
- Built-in automatic test routines
PMM ER8000 FFT | 9 kHz – 3 GHz
- Full compliant Measurement band B in 2 seconds
- Full compliant Measurementb band C+D in 60 seconds
- Built-in 16 A single phase LISN
Rohde & Schwarz ESRP7 EMI Test Receiver | 10 Hz – 7 GHz
- EMI test receiver and signal/spectrum analyzer combined in one box
- Optional preselection and preamplifier (R&S ESRP-B2)
- Resolution bandwidths in line with CISPR, optionally in decade steps from 10 Hz to 1 MHz (R&S ESRP-B29)
Rohde & Schwarz EPL1000 | 5 kHz – 30 MHz
- Frequency range of 5 kHz to 30 MHz
- Preselection filters
- Time domain scan
Narda PMM CDD-4 Continuous and Discontinuous Disturbances Analysis and Verification Set
- PMM CA0010 Click Analyzer Features Internal 16 A single-phase LISN, fully CISPR 16-1-2 compliant 150 kHz – 30 MHz: just plug the EUT power cord and go RF in front-end with preselection
- Internal 16 A single-phase LISN, fully CISPR 16-1-2 compliant 150 kHz – 30 MHz: just plug the EUT power cord and go
- RF in front-end with preselection filters and individual auto-attenuators for each of the four frequencies, to guarantee the best dynamic range as required by the challenging discontinuous
Emzer EMSCOPE | 9 kHz – 110 MHz
- Upgraded frequency range of 9 kHz - 110 MHz
- Built-in 2-port LISN
- Compact and cost-effective
Doble PDS100 Partial Discharge Surveyor
- 50 MHz - 1000 MHz
- 120 kHz / 6 MHz RBW
- Peak, Average, & SPAM
PMM CA0010 Click Analyzer | 150 kHz, 500 kHz, 1.4 MHz, 30 MHz
- Performs discontinuous disturbance (click) analysis
- Designed to fulfill CISPR 16-1-1, CISPR 14-1 and IEC/EN55014-1 test standards
- Four independent frequency channels measure simultaneously
Megger/HDW/SebaKMT OWTS M28, 28 kV Partial Discharge Analyzer
- Partial discharge diagnosis by means of damped AC voltage (DAC)
- Partial discharge level measurement according to IEC 60270
- Automatic adjustment of the bandwidth of the measurement circuit for optimized signal detection
Rohde & Schwarz ESCI | 9 kHz – 3 GHz
- Combination of standard-compliant EMI test receiver and high-quality spectrum analyzer
- Integrated preselection with selectable 20 dB preamplifier
- Effective analysis of the disturbance spectrum through simultaneous graphical presentation of the disturbance level and emission spectrum around the receive frequency (“mixed-mode”)
Rohde & Schwarz ESR | 10 Hz – 26.5 GHz
- Compliant with CISPR 16-1-1 Ed. 3.1
- Preselection with integrated 20 dB preamplifier
- Resolution bandwidths in line with CISPR and optionally in decade steps from 10 Hz to 1 MHz (MIL STD-461, DO-160)
PMM ER9000 | 10 Hz – 3 GHz
- ER9000 Opt. 01: 10 Hz - 3 GHz
- Very fast FFT scan gapless (2 sec. In Band B, 1 min. In Band C + D)
- Color Touchscreen display
Hipotronics DDX9101 Digital Partial Discharge Detector
- Settable PD threshold with indicator light when limit is exceeded
- Ethernet port for communication with PC (optional)
- Data acquisition and remote control software package
OMICRON MPD 600 Partial Discharge Measuring System
- Unsurpassed immunity to interference for partial discharge measurements, even under difficult operating conditions
- High measurement accuracy thanks to completely digital data processing
- Quickly and easily extendible to a virtually unlimited number of channels
PMM PL-01 9 kHz – 30 MHz Pulse Limiter
- Designed according to criteria of cheaply and compactness, it can be used together with PMM 8010 System for Conducted Interferences measurement, or any other RF receiver.
Megger/HDW/SebaKMT OWTS HV150, 150 kV PD Tester for HV Cables
- PD diagnosis by means of damped AC voltage (DAC)
- PD level measurement according to IEC 60270
- Advanced PD detection and PD site localization
Hipotronics DDX7000 Digital Partial Discharge Detector
- Automated Testing
- Easy Operation – uses the worldwide standard Windows operating system
- Customized Report Generation – allows transfer of pulse displays and data into commonly used word processors and spreadsheets
Keysight N9038A-526 | 3 Hz – 26.5 GHz
- DC frequency range 20 Hz to 26.5 GHz
- AC frequency range 10 MHz to 26.5 GHz
- CISPR bandwidth 200 Hz, 9 kHz, 120 kHz, and 1 MHz (MIL-STD and bandwidths incremented in 10% steps)
Haefely DDX 9160 Partial Discharge Detector
- User-defined measuring band
- Unique flexible high order digital filters
- High-resolution spectrum analyzer with oscilloscope
Uvirco Technologies CoroCAM 7HD Corona Imaging Camera
- Adjustable and focusable viewfinder
- High sensitivity detector
- Motorized Solar Blind (SB) filter removal in Non-Solar Blind (NSB) mode
