Keysight N9038A MXE Series | 3 Hz – 3.6/8.4/26.5/44 GHz
- Consistent measurement framework
- Broadest set of applications
- Upgradeable processor, memory, connectivity, and more
GAUSS INSTRUMENTS TDEMI ULTRA40 | 9 kHz – 40 GHz
- A frequency range from DC up to 40 GHz
- 685 MHz real-time analysis bandwidth
- Dynamic range of more than 100 dB
PMM 9010F | 10 Hz – 30 MHz
- The frequency range of the base PMM-9010F system can be extended to 18Ghz with the addition of the PMM 9030, 9060 and 9180 modules described in more detail below
- Frequency range: 10 Hz – 30 MHz, expandable to 3/6/18 GHz by the external modules 9030, 9060, 9180
- Very low noise floor: < -24 dBµV in band A, < -7 dBµV in band B
GAUSS INSTRUMENTS TDEMI X40 | 9 kHz – 40 GHz
- Frequency range from DC up to 40 GHz
- 645 MHz real-time analysis bandwidth
- Dynamic range of more than 100 dB
PMM CA0010 Click Analyzer | 150 kHz, 500 kHz, 1.4 MHz, 30 MHz
- Performs discontinuous disturbance (click) analysis
- Designed to fulfill CISPR 16-1-1, CISPR 14-1 and IEC/EN55014-1 test standards
- Four independent frequency channels measure simultaneously
PMM 9180 | 6 – 18 GHz
- 6 GHz to 18 GHz Frequency Range
- 100 HZ Resolution
- < 2 ppm Reference Frequency
PMM 9060 | 30 MHz – 6 GHz
- Modular approach for all budgets
- Eliminates long coax cables
- Built-in automatic test routines
PMM ER8000 FFT | 9 kHz – 3 GHz
- Full compliant Measurement band B in 2 seconds
- Full compliant Measurementb band C+D in 60 seconds
- Built-in 16 A single phase LISN
PMM 9030 | 30MHz – 3GHz
- Modular approach for all budgets
- Eliminates long coax cables
- Built-in automatic test routines
Rohde & Schwarz ESRP7 EMI Test Receiver | 10 Hz – 7 GHz
- EMI test receiver and signal/spectrum analyzer combined in one box
- Optional preselection and preamplifier (R&S ESRP-B2)
- Resolution bandwidths in line with CISPR, optionally in decade steps from 10 Hz to 1 MHz (R&S ESRP-B29)
Rohde & Schwarz EPL1000 | 5 kHz – 30 MHz
- Frequency range of 5 kHz to 30 MHz
- Preselection filters
- Time domain scan
Narda PMM CDD-4 Continuous and Discontinuous Disturbances Analysis and Verification Set
- PMM CA0010 Click Analyzer Features Internal 16 A single-phase LISN, fully CISPR 16-1-2 compliant 150 kHz – 30 MHz: just plug the EUT power cord and go RF in front-end with preselection
- Internal 16 A single-phase LISN, fully CISPR 16-1-2 compliant 150 kHz – 30 MHz: just plug the EUT power cord and go
- RF in front-end with preselection filters and individual auto-attenuators for each of the four frequencies, to guarantee the best dynamic range as required by the challenging discontinuous
Emzer EMSCOPE | 9 kHz – 110 MHz
- Upgraded frequency range of 9 kHz - 110 MHz
- Built-in 2-port LISN
- Compact and cost-effective
PMM PL-01 9 kHz – 30 MHz Pulse Limiter
- Designed according to criteria of cheaply and compactness, it can be used together with PMM 8010 System for Conducted Interferences measurement, or any other RF receiver.
GAUSS INSTRUMENTS TDEMI eXtreme Series | 9 kHz – 1/3/6/18/26.5/40 GHz
- Real Time Spectrogram Real-time bandwith of 162.5 MHz, 645 MHz Upgrade Option Peak, Average and RMS Detector
- Real-time bandwith of 162.5 MHz, 645 MHz Upgrade Option
- Peak, Average and RMS Detector
Rohde & Schwarz ESCI7 9 kHz - 7 GHz EMI Test Receiver
- Combination of standard-compliant EMI test receiver and high-quality spectrum analyzer
- Integrated preselection with selectable 20 dB preamplifier
- Effective analysis of the disturbance spectrum through simultaneous graphical presentation of the disturbance level and emission spectrum around the receive frequency (“mixed-mode”)
PMM 9010 | 10 Hz – 30 MHz
- The marker is a very powerful feature, providing an easy-to-read frequency/amplitude value through a simple knob rotation in the window span
- Pre-loaded limits for sweep mode are stored in a nonvolatile memory, providing for CISPR Compliance
- Simultaneous detectors, QP-PK-AVGRMS, for time-coherent measurements, provide parallel indications at every frequency value in the range
Rohde & Schwarz ESL6 | 9 kHz – 6 GHz
- Frequency range from 9 kHz to 6 GHz covering almost all commercial EMC standards
- First-ever combination of an EMI test receiver and spectrum analyzer in the entry-level class
- All major functions of an advanced EMI test receiver, including fully automated test sequences
Rohde & Schwarz ESRP | 10 Hz – 7 GHz
- Disturbance measurements in line with commercial standards Precompliance measurements EMI measurements in spectrum analyzer mode
- Precompliance measurements
- EMI measurements in spectrum analyzer mode
Rohde & Schwarz ESU40 | 20 Hz – 40 GHz
- Automatic and interactive measurement functions
- Parallel IF analysis
- Up to three detectors Average detector with meter time constant (CISPR-Average) RMS-Average detector APD (amplitude probability distribution to CISPR 16)
Keysight N9038A-508 | 20 Hz – 8 GHz
- DC Coupled Frequency Range 20 Hz to 8.4 GHz
- AC Coupled Frequency Range 10 MHz to 8.4 GHz
- CISPR bandwidth 200 Hz, 9 kHz, 120 kHz, and 1 MHz; MIL-STD and bandwidths incremented in 10% steps
PMM FR4003 | 9 kHz – 30 MHz
- Antenna CISPR 12, CISPR 16, CISPR 25, MIL-STD, DO-160 fully compliant
- Internal full CISPR 16-1-1 receiver
- Embedded attenuator, preamplifier and preselectors
Rohde & Schwarz ESW44 | 1 Hz – 44 GHz
- Standard-compliant EMI measurements in spectrum analyzer mode
- RF performance that meets exacting demands
- Exceptionally wide dynamic range
Rohde & Schwarz ESCI | 9 kHz – 3 GHz
- Combination of standard-compliant EMI test receiver and high-quality spectrum analyzer
- Integrated preselection with selectable 20 dB preamplifier
- Effective analysis of the disturbance spectrum through simultaneous graphical presentation of the disturbance level and emission spectrum around the receive frequency (“mixed-mode”)
Rohde & Schwarz ESR | 10 Hz – 26.5 GHz
- Compliant with CISPR 16-1-1 Ed. 3.1
- Preselection with integrated 20 dB preamplifier
- Resolution bandwidths in line with CISPR and optionally in decade steps from 10 Hz to 1 MHz (MIL STD-461, DO-160)