Haefely PSURGE 30.2 Surge Test System | 30 kV / 30 kA
- Up to 30 kV impulse voltage
- Up to 30 kA impulse current
- automatic polarity switching
Teseq CDN 3063-S100 3-Phase Coupling/Decoupling Network
- Three phase models with broad current range up to 100 A
- Fully automated surge and/or burst coupling
- IEC and ANSI coupling methods
EMC Partner IMU-MGE Conducted Immunity Test System
- Surge / CWG 4kV / 5 kV / 6kV / 8kV
- Ring Wave 6kV / 8kV
- EFT 4kV / 5kV / 6kV / 7kV
Haefely AXOS5 Compact Immunity Test System
- 5 kV Surge
- 5 kV EFT/Burst
- Built-in 1 ph,16 A, 264 V CDN
Haefely PSURGE 8000 Surge Platform Test System
- Built according to IEC/EN 61000-4-5 Ed. 1 & 2 and ANSI C62.41/45
- 1.2/50 µs open circuit up to 7.4 kV
- 8/20 µs short circuit up to 3.7 kA
Haefely AXOS8 Compact Conducted Immunity Test System
- 7 kV Surge
- 7 kV Ring Wave
- 5 kV EFT/Burst
EM Test NX5 Multifunctional Test Generator
- 5kV Surge
- 5.5kV EFT/Burst
- 1 Ph 16A CDN
EMC Partner IMU4000 Immunity Tester 4kV
EMC Partner IMU-MGS Conducted Immunity Generator
- One touch parameter editing in run state
- Impulse stability over long periods
- Intuitive multi touch graphical interface
EM Test UCS 500N5 Multifunctional EFT, Surge & Power Fail Generator
- 5kV Surge
- 5.5kV Burst
- 5kV ± 10% TSurge
Thermo Keytek ECAT E103 Control Center
- Virtual Front Panel™ retains key operating parameters during set up & testing
- Multi-level system interlock architecture provides maximum safety
- Single output port/instant mode switching
Haefely / Bellcore 1089 Lightning Test System
- Full hybrid waveforms according to the lastest GR-1089 Core section 4
- 1st and 2nd level lightning surges
- Integrated automatic coupling for 2 and 4 wire telecom system
Haefely VTM 15000/05 Impulse Transformer For Isolation Testing
- 1.2/50μs voltage impulse
- Output amplitude up to 15kV (PSURGE 8000 & PIM 100)
- Output amplitude up to 14kV (AXOS 8)
EMC Partner EMCP-INS-1250 Impulse Surge Generator
- Operating V: 100-240V (50/60Hz) ±10%
- Output impedance: 40Ω
- Consumed VA: ON<150VA, standby<15VA
EM Test VSURGE NX20
- Surge voltage up to 20 kV
- 11 different capacitance ranges selectable from 20 nF to 170 nF
- Compliant to IEC/EN 61730-1/2
EM Test NX7 Multifunctional Test Generator
- 7 kV Surge
- 7 kV Ring Wave
- 5.5 kV EFT/Burst
Teseq NSG 3060 Transient Generator
- Modular, expandable system
- Surge voltage to 6.6 kV for overtesting
- Easy to use 7" color touch screen
Teseq NSG 3040 Transient Generator
- Surge voltage to 4.4 kV
- EFT/Burst to 4.8 kV/1 MHz
- EUT Supply: 1-Phase
Teseq NSG 3060A Multifunction Generator | 6.6 kV
- One box solution system
- Surge voltage to 6.6 kV
- Ringwave voltage to 6.6 kV
Noiseken LSS-F02 Series Lightning Surge Simulator
- Conforms to the IEC61000-4-5 standard
- "Output voltage 15kV, current 7500A" which can conduct breakdown resistibility test
- "50% reduction of the output interval" which can drastically reduce the test time
EMC Partner IMU3000 Immunity Tester
- 8kV Surge
- 6.1kV Burst
- 300V Dips & Drops
Compliance West MegaPulse Implantable Test 2 Surge Tester
- Peak Test Voltages: 140/270V
- Duty Cycle: 1 pulse per 20sec
- Line Voltage: 120V AC, 50/60Hz
M Precision Laboratories EMCPro PLUS EMC Test System
- Portable, mid-range EMC test system
- Resident capabilities for compliance testing to 6 IEC/EN standards
- Addresses ANSI/IEEE C62.41, ITU, ETSI, & UL 864 standards
Thermo Keytek ECAT E522
- AC CDN for three-phase lines to 480V, 32A/phase
- Surge Repetition Rate 1 shot/30 seconds @ <=10kV 1 shot/minute @ >10kV
- Open-Circuit Voltage: 1.2/50µs, 200V to 20.2kV ±10%
Thermo Keytek ECAT E521
- AC CDN for single-phase lines to 480V, 32A
- Surge Repetition Rate 1 shot/30 seconds @ <=10kV 1 shot/minute @ >10kV
- Open-Circuit Voltage: 1.2/50µs, 200V to 20.2kV ±10%